KERONG KR-K19-FPBT Electronic Key Instruction Manual

Electronic Key

Instruction

KR-K19-FPBT

TECHNOLOGY CHANGES LIFE

Introduction

Dear customer,
Thank you for purchasing our product. To ensure proper usage of this product, please carefully read this manual before using it.
If you have read the entire manual, we recommend to keep it in a safe place for future reference. This will be beneficial for your continued use of the product.
In the initial state, any fingerprint can unlock the lock. However, once a fingerprint is registered, the lock will only respond to the registered fingerprints and not be unlocked by for any other unregistered fingerprints.

1. Product Introduction

1.1 Electronic Key Instruction

Unit: mm

(1) Communication Interface
(2) LED Indicator
(3) Unlock Button
(4) Password Keypad
(5) Confirm
(6) Type-C Interface
(7) Fingerprint Reader
(8) Hanging Hole

1.2 Electronic Key Accessories

Electronic key X 1       Type-C Charging Cable X 1

1.3 Electronic Key Basic Parameter

LED Indicator Status Instruction

| Green Light| Correct Operation
---|---|---
| Red Light| Wrong Operation
| White Light| Initialization/Paired
| Blue Light (Flashing)| Low Voltage Alarm
| Blue Light| Configured with Fingerprint/Password

Factory Default Setting

1. Initial Admin Password: 000000
2. Password Valid Only In 6 Digits
3. Password Digit Range: 0-9
4. Buzzer Setting: ON
5. Alarm Setting: ON
6. With Attack Protection Activated

Tips:
Attack Protection:
After fingerprint wrongly entered 5 times or password wrongly entered 3 times (4 or more digits are incorrectly entered consecutively each time) continuously, the system will be locked and with attack protection alarms. The alarm can be canceled automatically after 180s; otherwise, it can login the APP and send the unlocking command to cancel.

2. Two Operation Methods

2.1 Setting & Operation with the Keypad of Electronic Key

• 2.1.1 Unconfigured Mode to Unlock

No need to input any fingerprint/password, it can click the “Unlock Button” on the key to activate the key.

Then the blue light on the key will shin, during the shining, it can insert the key into lock to unlock directly.

• 2.1.2 Add Fingerprint & Password

Add Fingerprint

1. Input “0#”, the buzzer will long beep for once, and the blue light will flash.
2. During the flashing, input the “Admin Password #”, the buzzer will long beep for once, and the LED light will shin from green to blue. Then input “1”, the blue light will continue to flash.
3. Input the “New User Fingerprint” 6 times during the flashing, then the buzzer will long beep for once, and the green light will shin for 1s, indicating that the user fingerprint is added successfully.

Add Password

1. Input “0#”, the buzzer will long beep for once, and the blue light will flash.
2. During the flashing, input the “Admin Password #”, the buzzer will long beep for once, and the LED light will shin from green to blue. Then input “1”, the blue light will continue to flash.
3. Input the “New User Password #” twice during the flashing, then the buzzer will long beep for once, and the green light will shin for 1s, indicating that the user password is added successfully.

Tips:
(1) Password Valid Only In 6 Digits
(2) Password Capacity: 50
(3) Fingerprint Capacity: 50
(4) When the key is in unconfigured mode or being activated, after waking up by pressing any button or fingerprint, the LED will show white light; When the key is configured with fingerprint/password, after waking up by pressing any button or fingerprint, the LED will show blue light

• 2.1.3 Change Fingerprint & Password

Change Fingerprint

1. Input “0#”, the buzzer will long beep for once, and the blue light will flash.
2. During the flashing, input the “Admin Password #”, the buzzer will long beep for once, and the LED light will shin from green to blue. Then input “2”, the blue light will continue to flash.
3. Input the “Old User Fingerprint” once during the flashing, then the buzzer will long beep for once, and the LED light will shin from green to blue.
4. Input the “New User Fingerprint” 6 times during the flashing, then the buzzer will long beep for once, and the green light will shin for 1s, indicating that the user fingerprint is changed successfully.

Change Password

1. Input “0#”, the buzzer will long beep for once, and the blue light will flash.
2. During the flashing, input the “Admin Password #”, the buzzer will long beep for once, and the LED light will shin from green to blue. Then input “2”, the blue light will continue to flash.
3. Input the “Old Admin/User Password #” during the flashing, then the buzzer will long beep for once, and the LED light will shin from green to blue.
4. Input the “New Admin/User Password #” twice during the blue light flashing, then the buzzer will long beep for once, and the green light will shin for 1s, indicating that the new admin/user password is changed successfully.

• 2.1.4 Delete Fingerprint & Password

Delete Fingerprint

1. Input “0#”, the buzzer will long beep for once, and the blue light will flash.
2. During the flashing, input the “Admin Password #”, the buzzer will long beep for once, and the LED light will shin from green to blue. Then input “3”, the blue light will continue to flash together with one beep buzzer. Then input “1”, the buzzer will beep once again together with the blue light flashing.
3. Input the “User Fingerprint” during the flashing, then the buzzer will beep for once, and the green light will shin for 1s, indicating that this user fingerprint has been deleted well.

Delete Password

1. Input “0#”, the buzzer will long beep for once, and the blue light will flash.
2. During the flashing, input the “Admin Password #”, the buzzer will long beep for once, and the LED light will shin from green to blue. Then input “3”, the blue light will continue to flash together with one beep buzzer. Then input “1”, the buzzer will beep once again together with the blue light flashing.
3. Input the “User Password #” during the flashing, then the buzzer will beep for once, and the green light will shin for 1s, indicating that this user password has been deleted well.

Delete All Fingerprints & Passwords

1. Input “0#”, the buzzer will long beep for once, and the blue light will flash.
2. During the flashing, input the “Admin Password #”, the buzzer will long beep for once, and the LED light will shin from green to blue. Then input “3”, the blue light will continue to flash together with one beep buzzer. Then input “2”, the buzzer will beep once again together with the green light shins for 1s, indicating that all fingerprints & passwords have been deleted well.

• 2.1.5 Initialize the Electronic Key

1. Input “0#”, the buzzer will long beep for once, and the blue light will flash.
2. During the flashing, input the “Admin Password #”, the buzzer will long beep for once, and the LED light will shin from green to blue.
3. Input “4” during the flashing, the blue light will continue to flash together with one beep buzzer. Then input “4” again, and the LED light will shin as green for 4 times and turn to white light. The buzzer will long beep for once again, indicating that the key initialization is successful.

2.2 Setting & Operation with the Bluetooth APP

• 2.2.1 APP Download & Install

1. Scan the QR code below to download the APP.
   (Tips: It can also download “KERONG Lock” from APP Store / Google Play.)

2. Download finished, then install the APP on your phone directly.

3. Open the Bluetooth on the phone and log in directly, no need email or phone number account.

KERONG Lock

• 2.2.2 Language Change & “My” Interface Instruction

1. User Agreement:
   Product Using Precautions & Agreements

2. Setting:
   Language Change to “English” Or “ ”

3. Privacy Policy:
   Get the Privacy Policy Notice Information & Check the Contact Information If Question Met

4. Version Updating:
   APP Version Updating

• 2.2.3 Add the Electronic Key

1. Click “+” to add electronic key
2. Choose the one preparing to add (Please make the electronic key near the phone/APP within 5m, the signal will be better)
3. Input the verification code to pair and confirm (The initial verification code is 5168)
4. The electronic key has been added successfully

• 2.2.4 Add the Lock

1. Choose the electronic key preparing to enter
2. Add the lock (For the key without binding any lock)
3. Enter the Lock Core Setting Menu
4. Click “+” to add the lock
5. Click “Add” and insert the electronic key into lock (Please insert the key into lock within 10s to communicate and pair)
6. The lock has been added successfully

• 2.2.5 Function Menu Instruction

Main Function Menu

1. Key ID:
   The key code name and ID number

2. Lock Core Bound:
   The bound lock quantity to the key

3. Enter the Key Unlock Setting Menu

4. Enter the Lock Status Checking Menu:
   Quickly check the lock status and whether it has been added by the electronic key

5. Enter the Key Function Setting Menu

6. Enter the Lock Core Setting Menu

7. Battery:
   The battery level and status

8. MAC:
   The key MAC address

Lock Status Checking Menu

1. Insert the electronic key into lock

2. The lock has not been added

3. “No” to exit,
   “Yes” to add the lock

4. The lock has been added by the current electronic key

5. “No” to exit,
   “Yes” to enter the Lock Core Setting Menu

6. The lock has been added by the other electronic key

7. Exit

Key Function Setting Menu

(1) Key Rename Setting:
Rename electronic key according to personal preference

(2) Alarm Setting:
Attack protection alarm activates & deactivates setting (Activate as default)

(3) Time Check:
Make the electronic key clock same as phone/real time

(4) Key Initialization:
Key unlock setting and key function setting will be back to factory default; the app will be disconnected, but the lock paired before still exists

(5) APP Version No.:
The key program version (software version) and the key PCB version (hardware version)

(6) Pairing Code Change:
Same as verification code, used to pair the electronic key and APP. Once received and bound the electronic key, please change this code first

(7) Buzzer Setting:
The electronic key operation sound activates & deactivates setting (Activate as default)

(8) Key Log:
The electronic key operation records

(9) Key Location:
After clicking this function, the related key will beep to inform the user where it is

(10) Exit Connection:
Exit the connection between the APP and the current electronic key

(11) Cancel Pairing:
Same as Key Initialization to reset the electronic key

• 2.2.6 Key Unlock Setting

The Electronic Key Fingerprint/Password Settings

1. Click “+” to add fingerprint/password

2. Add fingerprint/password

3. Input fingerprint 6 times

4. Set the password according to personal preference and confirm

5. Choose the one preparing to delete

6. Add new fingerprint

7. Delete the fingerprint

8. Choose the one preparing to modify/delete

9. Modify the password and confirm

10. Delete the password

Delete All Passwords

Click “Delete all passwords” and confirm to delete all passwords

(The initial admin password will not be deleted, but if the initial admin password has been changed, it will also be deleted)

Delete All Passwords and Fingerprints

Click “Delete all passwords and fingerprints” and confirm to delete all passwords and fingerprints

(The admin password will be back to the initial admin password, and cannot be deleted)

• 2.2.7 Lock Core Setting

Paired Lock List
(Tips: Before searching, please insert the electronic key into the lock wanted to check to refresh first.)

1. : Add new lock

2. : Enter the Lock Core Menu

3. Authorization Type:
   The permission level of the electronic key for the lock (Admin/User)

4. User Validity:
   Whether the electronic key is valid or invalid to the lock currently

5. Relation Type:
   Using period of validity (Permanent/One-time/Period)

6. CORE:
   The bound lock code name and ID number

7. Search:
   Look for the one preparing to check (It can input the lock ID to search)

Lock Core Menu

(1) KEY: The bound key code name and ID number

(2) CORE: The current lock code name and ID number

(3) Authorization: The permission level of the bound electronic key (Admin/User)

(4) The Paired Key Quantity: The bound electronic key quantity to the current lock

(5) Paired Key Information: Check & Modify the bound electronic key information to the current lock

(6) Add New Key: Add the new electronic key to the current lock

(7) Lock Initialization: Reset the current lock and back to factory default status, all paired electronic keys and lock settings will be deleted and cleared (After clicking this function, please insert the electronic key into the lock within 10s to communicate)

(8) Lock Name Setting: Rename the lock according to personal preference

(9) Lock Log: The current lock operation records (After clicking this function, please insert the electronic key into the lock within 10s to refresh)

(10) Locking Mode: Select locking mode preference
( Manuel Locking -It needs to insert the electronic key into lock and send the locking command to make the lock enter the locking status)
( Auto Locking -The lock will enter the locking status automatically after unlocking for 3s)
(Each time before unlocking, it needs to choose which mode to lock; otherwise, it will be default as auto locking after unlocking for 3s)

(11) Door Magnet: Check the lock status whether it is in “Close” status or in “Open” status

(12) Key Sign: Slide to left to lock, and slide to right to unlock (Green color means the current locking status)

Paired Key Information of the Current Lock

1. Paired Key Information

2. Add new key

3. Click “+” to add new key

4. Enter the paired key  information menu, and choose the one preparing to check

5. Modify the key authorization

6. Set the key authorization type

7. Set the key relation type

8. Delete the key

Add New Key for the Current Lock

1. Add New Key
2. Input the fixed code, key ID, authorization type, and relation type of the key
3. Confirm to add the new key

3. Tips & Notices

(1) After setting the fingerprints and passwords of the key well, each time it can input the “correct fingerprint/password #” to activate the key, then it also needs to press the “Unlock Button” before unlocking.
(2) It can deactivate the electronic key through long press the “#” button.
(3) Fingerprint Reading Notice:

The right way to read fingerprints

The wrong way to read fingerprints

Note:
a. When entering fingerprints, please place your finger on the fingerprint module according to the above correct method. It should be noted that if the finger is too dry or too worn, it will affect the unlocking, and the fingerprint entry will fail.

b. If the red light is on during pressing, please adjust the pressing position of your finger to continue entering.

c. If there is no action of pressing the fingerprint during registration, it will exit after a timeout of 30 seconds. After exiting, it needs to start again.

(4) Do not take apart the electronic key and the lock without permission.

(5) Keep the metal 3 PIN contacts of the lock and the electronic key dry and non-polluting.

(6) It can use the power bank with Type-C interface to have emergency power for the electronic key if needed.

(7) The user authorization electronic key only has the locking and unlocking function in the Lock Core Setting Menu.

4. Specifications & Parameters

Specifications

Electronic Key
Fixed Code Name| 588
---|---
The According Lock
Core Fixed Code Name| 168
Key Log Capacity| 10, 000
Lock Core Log Capacity| 32
Lock Quantity Can
Be Added By One Key| 10,000
Key Quantity Can
Be Paired By One Lock| 10

Parameters

Activated Method

| Fingerprint, Password, Bluetooth
---|---
Bluetooth Module|

Ebyte

Bluetooth Communication Distance

| 6-8m
Loading Current|

350mA@4.2V

Fingerprint Activate Current

| 37mA@4.2V
Password Activate Current|

6mA@4.2V

Charging Current

| 365mA@5V
Charging Time|

3H

Lithium Battery

| CLY803030 3.7V 740mAh
Wide Voltage|

3.4V~4.2V

Low Voltage

| 3.6V+0.1V
Anti-static Electricity|

Contact Discharge 6KW, Air Discharge 12KW

Unlocking Times With Full Charged

| 1900+ Times
Motor Lifetime|

100,000+ Times

Smart Electronic Battery-less Locking Solution Manufacturer

20+ Years Experience

OEM & ODM Available

V.1: K19a240715E

+86 136 0305 9448       john@keronglock.com www.keronglock.com

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>