Honeywell Voyager 1250g Single Line Laser Scanner User Guide
- June 12, 2024
- Honeywell
Table of Contents
Voyager™ 1250g
Single-Line Laser Scanner
Quick Start Guide
Voyager 1250g Single Line Laser Scanner
Go to www.honeywellaidc.com for French.
VG1250-QS Rev B
Note: Refer to your user’s guide for information about cleaning your device.
Getting Started
Turn off the computer’’s power before connecting the scanner, then power up
the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner USB:
Serial (RS232): RS485: Keyboard Wedge:
Reading Techniques Standard Product Defaults
The following bar code resets all standard product default settings.
RS485 Interface
The RS485 interface defaults to port 5B. If you have an IBM POS terminal using
port 9B, scan the appropriate code below to program the terminal, then power
cycle the cash register. Note: For additional RS485 interface selections,
see the User’s Guide for your product at our website,
www.honeywellaidc.com.
Keyboard Country
the numeric bar code(s) from the end of this document, then the Save bar code to program the keyboard for your country. As a general rule, the following characters are not supported by the scanner for countries other than the United States: @I$#{}[]=/”\<>~
Country Code| Scan| Country Code| Scan| Country Code|
Scan
---|---|---|---|---|---
Arabia| 91| Hungary| 19| Spain| 10
Belgium| 1| IBM Financial| 90| Switzerland| 6
China| 92| Italy| 5| Thai| 94
Finland| 2| Japan| 28| Turkey| 24
France| 3| Korea| 93| USA (Default)| 0
Germany/ Austria| 4| Russia| 26| Vietnam| 95
Great Britain| 7| Slovenia| 31| |
Reread Delay
This sets the time period before the scanner can read the same bar code a
second time. Setting a reread delay protects against accidental rereads of the
same bar code. 
Suffix
If you want a carriage return after the bar code, scan the Add CR Suffix bar
code. To add a tab after the bar code, scan the Add Tab Suffix bar code.
Otherwise, scan the Remove Suffix bar code to remove the suffixes. 
Add Code ID Prefix to all Symbologies
Scan the following bar code if you wish to add a Code ID prefix to all
symbologies at once. 
Note: For a complete list of
Code IDs, see the User’s Guide for your product at our website,
www.honeywellaidc.com.
Data Format Editor Instructions
The following are abbreviated instructions for entering a data format. For complete instructions refer to your User’s Guide, available at our website, www.honeywellaidc.com.
- Scan the Enter Data Format symbol.
- Primary/Alternate Format: scan 0 for Primary Format
- Terminal Type: scan 099 for any terminal type
- Code I.D.: scan 99 for any bar code type
- Length: scan 9999 for any length bar code.
- Editor commands: use the Programming Chart that follows.
- Scan Save to save your entries.
Programming Chart
EZConfig-Scanning
To access additional features for the scanner use EZConfigScanning, an online
configuration software tool, available from our website at
www.honeywellaidc.com.
Technical Assistance
Contact information for technical support, product service, and repair can be
found at www.honeywellaidc.com.
Limited Warranty
Refer to
www.honeywellaidc.com/warranty_information
for your product’s warranty information.
User Documentation
For localized versions of this document, and to download the User’s Guide, go
to www.honeywellaidc.com.
Patents
For patent information, please refer to
www.honeywellaidc.com/patents.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HIl to determine whether
any such changes have been made. The information in this publication does not
represent a commitment on the part of HII.
HIl shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from
the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written
consent of HII.
© 2011 Honeywell International Inc. All rights reserved. Web Address:
www.honeywellaidc.com
BSR idware GmbH
Jakob-Haringer-Str.3
A-5020 Salzburg
https://www.bsr.at
sales@bsr.at
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>