KERONG KR-S80A Card Cabinet Lock User Manual
- June 3, 2024
- KERONG
Table of Contents
KR-S80A Card Cabinet Lock
User Manual
Preface
Dear Customers:
Thanks for choosing card cabinet lock offered by Kerong Industry (HK) Co .,
Limited . Please read this 《 User Manual 》 carefully before using.
Thanks for your kind understanding and support.
Product Appearance
-
1 Lock body
Material: ABS
Size: 616122 mm
-
Lock hook
Suitable lock hook for different installation ways.
Product Installation Dimension
Product Functions
3.1 Parameters
| Material | ABS for lock body shell |
|---|---|
| Power consumption | Load current < 200mA |
Locked-rotor current < 350mA
Standby current < 20mA
Statistic current < 50uA @3V
Working voltage| 123A rechargeable lithium battery
Voltage: 2.1V-3.3V
Low voltage alarm: 2.5V±0.1V
Ultimate low voltage: 2.1 V, can operate the last unlock
Working environment| Working temperature -15 t — +65°C
Working humidity 10% — 90%RH
Anti-static| Air static 15KV
Touch static 8KV
3.2 Functions & Features
| Functions | Features |
|---|---|
| Sound prompt | Lock will prompt with sound when swipe correct/wrong card, |
battery is in low voltage, unlocking for a long time
Light prompt| Green: correct operation Red: wrong operation Blue: low voltage
White: standby status
Alarm functions| Low voltage alarm:
I .When battery’s voltage is lower than 2.5V, light will shine in blue and
lock sounds “di di” for 8 times on every opening to remind user to change new
battery.
2. When voltage is less than 2.1V, lock can’t be locked until change new
battery.
---|---
Lock status alarm:
I. Lock will keep warning for lOs if it keeps unlocking status
more than 30s.
2. X Lock status alarming function only exists in private mode. Press button
1+2 can enable/disable this function.
Locking protection:
Input wrong code/card, lock will shine in red twice and prompt with “di
di”.Wrong for 5 times continuously, lock will be unavailable for 5mins.
During unavailable period:
I. Use manager card can make it available.
2. Input user card lock will prompt with “di di di di di” and light shines in
red.
Card functions| 1.Manager card: For setting user card, also can be used for
emergency unlock in public mode.
2.User card: Only be used for unlocking.
3.Delete card: For deleting all user cards at one time, or delete a specific
card.
4.Master card: For emergency unlocking.
Button functions| Button 1: Set manager card and user card. Button 2: Set
delete card.
Button 3: Change working mode.
Button 4: Set Master card
Reset: Reset the lock.
Functional cards| I. Change working mode by card.
2.Enable & disable lock status alarm function by card.
3.Enable & disable lock sound by card.
4. Function cards can be encrypted. Only these encrypted function cards can
set the lock.
5. Users can use their own cards that are compatible with our lock, but
function cards only can be Mifare 1 card.
Operations
4.1 Public Mode
4.1.1 Mode introduction
Lock keeps unlocking under public mode, manager card should be programmed
first(manager card can use for emergency unlock). Any card to lock and same
card to unlock.
4.1.2 Set lock into public mode
4.1.3 Set manager card
Notice:
-
While green light is flashing, user can set manager card continuously.
One lock can have max 3pcs manager cards. -
Manager card can be used for emergency unlock in public mode.
4.1.4 Set user card
※ In public mode, no need to set user card. Input any card can lock, then same
card to unlock.
4.1.5 How to use user card
4.2 Private Mode
4.2.1 Mode introduction
Lock keeps locking under private mode, manager card and user card should be
programmed first(manager card only for programming user card). Push the door
to close, and use the user card to unlock. 
4.2.2 Set lock into private mode
4.2.3 Set manager card
Notice:
-
While green light is flashing, user can set manager card continuously.
One lock can have max 3pcs manager cards. -
Manager card cannot use for emergency unlock, just for setting user card.
4.2.4 Set user card
Notice:
- While green light is flashing, user can set user card continuously.
One lock can have max 30pcs user cards.
4.2.5 How to use user card
4.2.6 Set delete card
Notice:
-
While green light is flashing, user can set delete card continuously.
One lock can have max 10pcs delete cards. -
Swipe the delete card, all user cards will be invalid, then need to set again.
-
If you want to delete one user card at one time, please let us know in advance.
4.3 Limited Public Mode
4.3.1 Mode introduction
Lock keeps locking first under limited public mode, manager card and user card
should be programmed first(manager card only for programming user card). Lock
will keep unlocking after unlocked, then swipe user card, push the door can
close the box.
4.3.2 Set lock into limited public mode
4.3.3 Set manager card
Notice:
-
While green light is flashing, user can set manager card continuously.
One lock can have max 3pcs manager cards. -
Manager card cannot be used for emergency unlock, just for setting user card.
4.3.4 Set user card
Notice:
-
While green light is flashing, user can set user card continuously.
One lock can have max 30pcs user cards. -
If user card is lost, you can use manager card to set a new user card to unlock.
4.3.5 How to use user card
4.3.6 Set delete card
Notice:
-
While green light is flashing, user can set delete card continuously.
One lock can have max 10pcs delete cards. -
Swipe the delete card, all user cards will be invalid, then need to set again.
-
If you want to delete one user card at one time, please let us know in advance.
Reset lock
Notice:
After resetting, the lock will be factory setting and all cards are invalid,
need to set cards again.
Technology Change Life
KERONG INDUSTRY (HK) CO., LIMITED
ADD: 2nd Floor, Tonghe Industry Park, Fuping North Rd Pingdi Street,
Longgang District, Shenzhen, Guangdong, China
Tel: 0755-28396063
Fax: +86-755-83117533
Website: www.kerong.hk
http://szkerong.en.alibaba.com/
Email：kr30@kerong.hk
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
- Alibaba Manufacturer Directory - Suppliers, Manufacturers, Exporters & Importers
- China Professional Manufacturer of Smart Cabinet Lock | KERONG
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>