KERONG KR-S123C Electronic Digital Password Cabinet Lock User Manual

KERONG KR-S123C Electronic Digital Password Cabinet Lock User Manual

Dear Customers:
Thanks for choosing card cabinet lock offered by Kerong Industry (HK) Co ., Limited . Please read this 《User Manual 》 carefully before using.

Thanks for your kind understanding and support!

1. Relative Products

2. Product Appearance

3. Product Installation Dimensions

Front Panel

Lock Hook

4. Product Functions

4.1 Parameters

4.2 Functions & Features

5.Operations

5.1 Public Mode

5.1.1 Mode introduction

Lock keeps unlocking under public mode, any code(with 4~8 digits) to lock and same code to
unlock. Manager code should be programmed first (manager code can be used for emergency
unlock).

5.1.2 Set manager code

Notice:

1. Factory manager code is 0000.
2. Valid manager code must be 4~8 digits.
3.  One lock only can with one manager code.
4. Manager code can be used for emergency unlock.

5.1.3 Set lock into public mode

Way one:

Way two:

5.1.4 Set user code

•  In public mode, no need to set user code. Input any code(with 4~8 digits) twice can lock,
  then input same code once to unlock.

•  In public mode, no need to set user card. Input any card can lock, then same card to unlock.

5.1.5 How to use user code

Notice:

1.  While green light is flashing, user can set delete card continuously. One lock can have max 10pcs delete cards.
2. Swipe the delete card, all user cards will be invalid, then need to set again.
3. If you want to delete one user card at one time, please let us know in advance.

5.2 Private Mode

5.2.1 Mode introduction

Lock keeps locking under private mode, manager code and user code should be programmed
first. Input user code to unlock, lock tongue will stretch out automatically after 5 seconds, then
push the door can close the box.

5.2.2 Set manager code

Notice:

1. Factory manager code is 0000.
2. Valid manager code must be 4~8 digits.
3. One lock only can with one manager code.
4. Manager code can be used for emergency unlock, after unlocking, user code will be reset.

5.2.3 Set lock into private mode

Way one:

Way two:

5.2.4 Set user code

Notice:

1. Factory user code is 1111.
2.  Valid user code must be 4~8 digits.
3.  One lock only can with one user code.

5.2.5 Set user card

Notice:

1. While green light is flashing, user can set user card continuously.
   One lock can have max 30pcs user cards.

5.2.6 How to use user code

5.2.7 How to use user card

5.3 Limited Public Mode

5.3.1 Mode introduction

Lock keeps locking first under limited public mode, manager code and user code should be
programmed first. Input user code to unlock and lock.

5.3.2 Set manager code

Notice:

1. Factory manager code is 0000.
2.  Valid manager code must be 4~8 digits.
3. One lock only can with one manager code.
4. Manager code can be user for emergency unlock, after unlocking, user code will be reset.

5.3.3 Set lock into limited public mode

Way one:

Way two:

5.3.4 Set user code

Notice:

1. Factory user code is 1111.
2. Valid user code must be 4~8 digits.
3. One lock only can with one user code.

5.3.7 How to use user code

Notice:

1. While green light is flashing, user can set delete card continuously.
   One lock can have max 10pcs delete cards.

2. Swipe the delete card, all user cards will be invalid, then need to set again.

3. If you want to delete one user card at one time, please let us know in advance.

6. Reset lock

Way one:

Way two:

Notice:
After resetting, the lock will be factory setting and all codes are invalid, need to set again.

7. Warm Tips

1. Light shines in blue means batteries are nearly run out, please change new batteries in time.
2. One lock can have max one manager code and one user code.
3. Please make sure the lock can work, batteries are included and all are set ready before
   installation.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>