LOKUKA LBY2 3.5mm Bluetooth Car Audio Adapter User Manual

USER MANUAL – LBY2

1. Product Description:

LOKUKA USB to 3.5mm Bluetooth car audio adapter is incredibly easy to use. Simply connect it to the Aux port of your car stereo, speaker, amplifier, headphone, or any other audio device, connect the USB plug to a USB jack to power the Bluetooth. The green light flashes quickly when it’s USB-powered and turns into a slow flash when the Bluetooth “YP04” connects successfully. And it’s ready to use. It supports music, hands-free calls, voice navigation, etc.

2. User Guide:

Step 1: Connect 3.5mm to the car “AUX” port or other aux devices, and connect USB to power the Bluetooth. (USB port can’t transfer audio).
Step 2: Active Phone/Pad/Laptop Bluetooth and connect our product “YP04”.
Step 3: Play music on your devices.

3. NOTICE:

The USB port is only for active Bluetooth, and the microphone is built into the USB port. If you use it on an iPhone, the “Device Type” in your iPhone needs to be set as a “Speaker”.

4. Product Specifications:

a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\gatt\rfcomm\sdp\l2cap
Bluetooth Transmission Distance| No barrier>10 Meters
Power Supply Interface| Power Supply Interface
Audio Output Interface| 3.5mm male port
Call Function| YES (USBA port has a built-in silicon microphone)
Operating Voltage| 3.6-5.5V
Working Current| 20mA Max
Led Status| After the USB is powered, the green light flashes quickly.
After the Bluetooth connection is successful, the green light flashes slowly.
Snr| >=90 dB
Tdh+n| -75 dB
Channel Separation| -80 dB
Frequency Response| 20Hz-20KHz
Product Length| 0.5M – 1.5M

SAFETY INFORMATION

1. Use for original or certified devices or accessories only.
2. Avoid improper bending, twisting, or abuse of the cable.
3. Avoid extreme temperatures, sun exposure, wet environment, or any hazardous surroundings.
4. Cables should be placed well to avoid tripping or other potential safety hazards.

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>