STRICH RD-BZ-CBR-7 ZEAL BLAST Boost Guitar Pedal Owner’s Manual
- September 21, 2024
- STRICH
Table of Contents
STRICH RD-BZ-CBR-7 ZEAL BLAST Boost Guitar Pedal
Congratulations on your ownership of this efftect pedal. Before using the pedal, please careffuly read the manual, which offers important information concerning how to properly operate the unit.
PRODUCT OVERVIEW
-
LOW Knob
Adjust the low -
OUTPUT Jack
1/4” mono audio jack, for signal output. -
True Bypass Footswitch
Push down the foot switch to switch between effects and bypass status. -
HIGH Knob
Adjust the high. -
LEVEL Knob
Adjust the effects level or volume. -
Input
1/4”mono audio jack, for connecting guitar. -
Power
Power input. Using only 9V adapter, negative tip.
Precautions When Connecting
- To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
- Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this pedal. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable. ·Raise the amp volume only after turning on the power to all connected devices.
- Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
- When powering up: Turn on the power to your guitar amp last.
- When powering down: Turn off the power to your guitar amp first.
Specifications
- Input Impedance: Min. 100k Ohm; Max. 350k Ohm
- Output Impedance: 300 Ohm
- Recommended Load Impedance: 10 kohm
- Equival Input Noise: -90 dBu or less
- Power Supply: 9V AC adapter
- Current Draw: 10mA
- Dimension: 115mm x 73mm x 48mm
- Weight: 270g
- Accessory: Owner’s Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>