UTILITECH 338WC008-CS-R 3 In 1 QI2.0 Charging Station User Manual
- September 20, 2024
- UtiliTech
Table of Contents
UTILITECH 338WC008-CS-R 3 In 1 QI2.0 Charging Station
Product Specifications
- Brand : UTILITECH
- Model : L338WC008-CS-R
- Item Number : 6305715
- Wireless Charger Type : 3-in-1 Qi 2.0 Charging Station
- Input : 5 V 3 A, 9 V 3 A, 12 V 2.5 A, 15 V 2 A
- Output 1: 15 W (Max) for Qi Devices
- Output 2: 5 W for TWS
- Output 3: 5 W for watch
Thank you for purchasing this UTILITECH product. We’ve created these easy-to- follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search for the item number, and refer to the Guides & Documents tab on the product’s page.
**What’s in the Box?
**
The box includes:
- Qi 2.0 15 W 3-in-1 Wireless Charger – 1
- 30 W USB-C Adapter – 1
- 3 ft USB-C to C Cable – 1
- Instruction Manual – 1
WIRELESS PRODUCT SPECIFICATION
- Input : 5 V 3 A,9 V 3 A,12 V 2.5 A, 15 V 2 A
- Output 1: 15 W(Max) for Qi Devices
- Output 2: 5 W for TWS
- Output 3: 5 W for watch
Compatibility
This wireless charger could provide power supply for devices with built-in
wireless charging receiver. (It is suitable for wireless charging devices)
- Power on: The blue light is on for 2 seconds
- Standby : The blue light is off
- Charging : The blue light on
- FOD : The blue light flash
Connect to 30 W USB-C adapter before plugging into power outlet for the power supply.
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit US – lowes.com. for more information.
**Setup
**
Connect the wireless charger to the 30 W USB-C adapter before plugging it into a power outlet for power supply.
Indicator Lights
The blue light indicates different states:
- Power on: Blue light on for 2 seconds
- Standby: Blue light off
- Charging: Blue light on
- FOD (Foreign Object Detection): Blue light flashes
Troubleshooting
- Problem: The magnetic attraction is not enough to absorb the mobile phone when the product touches mobile phones.
- Possible Cause: The distance between the product and the surface of the phone is too large, or the phone does not use the original phone case.
- Corrective Action: Check whether there is any interference between the product and the mobile phone, remove the mobile phone case or use the original mobile phone case when charging (Note: the magnetic attraction of the product and the mobile phone must meet the magnetic attraction standard of Qi2.0 and MFi: 650-900gf).
Care and Maintenance
- Avoid frequent charging and discharging.
- Avoid overcharging.
- Clean the charging port regularly.
- Avoid high and low temperatures
Safety Information
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARNING
- Please keep the charger away from water or other liquid.
- If you need to clean the charger, please make sure it is not connected to the power supply.
- Using the environment temperature remains 0 -25 C.
- Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
WARRANTY
1-year limited; After-sales customer support number: 866-994-4148
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF EXPOSURE COMPLIANCE
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with a minimum distance 20 cm between the radiator and your body.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Questions, problems or missing parts?
Before returning, contact us on:
866-994-4148, 8 a.m.-8 p.m., EST,
Monday-Sunday or ascs@lowes.com.
UTILITECH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
FAQ
Q: How do I know if my device is compatible with this charger?
A: Your device should have a built-in wireless charging receiver to be
compatible with this charger.
Q: What should I do if the charger is not working?
A: Check the connections, ensure the phone is within the recommended
distance, and use a compatible phone case.
Q: Can I use any USB-C adapter with this charger?
A: It is recommended to use the provided 30 W USB-C adapter for optimal
performance.