LIGHT n Carry LNCBAR Magnetic Light Bar User Manual
- June 12, 2024
- LIGHT n Carry
Table of Contents
ARM-BAR Operator’s Manual
Model No. LNCBAR
LNCBAR Magnetic Light Bar
WARNING
Read these instructions completely before using the LNCBAR as a lighting
mount. Also, read the instructions for any light mounted on the stand to
understand the specific mounting requirements of such lights.
WARNING
This product can expose you to chemicals, including Vinyl- Chloride, Styrene
and Acrylonitrile, which are known to the State of California to cause cancer.
For more information go to
www.P65Warnings.ca.gov.
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the LNCBAR safely and effectively. Please
read and follow these instructions and precautions carefully. In the rare
event that your flood light contains a damaged or missing item, does not
perform as specified, or requires warranty service, please call Technical
Service at 913-310-1050. Save your
purchase receipt, it is required for warranty service.\
WARNING
| Read these instructions completely before using the LNCBAR as a lighting
mount. Also, read the instructions for any light mounted on the stand to
understand the specific mounting requirements of such lights.
---|---
| Ensure the two halves and the hooks on each half of the bar are undamaged
and properly and securely connected prior to use.
| Ensure that any light or other attachment hung from the bar has a sufficient
magnetic bond to be secure. Falling objects can cause property damage or
personal injury. When in doubt as to the bond, tether the attachment to the
bar.
| High tension springs (on bar end hooks) can cause serious injury or death.
Care should be taken when expanding or retracting bar ends. Do not adjust,
repair or remove springs or the parts connected to them.
CONTENTS
Your Magnetic Lighting Bar Mount includes:
– LNCBAR: 2 parts
– Thumb Screw
– Six Magnets
ASSEMBLY
Your LNCBAR ships in two pieces for ease of shipping. To assemble, connect the
two halves by loosening the thumbscrew and inserting the portion with the male
end into the portion with the female end. Then, tighten the thumbscrew to
ensure the connection is secure – the thumb- screw requires only hand
tightening. Avoid overtightening.
Connect the preferred number of magnets to the bar as needed by screwing them
into the pre-drilled holes on the back of the bar. These allow the bar to be
mounted on metal surfaces, including storage on a toolbox.
OPERATION AND USE
Your LNCBAR is versatile enough to be used in a wide variety of applications.
With its included magnets, it can be mounted to any ferromagnetic metal
surface. Note that the thickness of the metal surface needs to be sufficient
to hold the bar in place. Make sure you pull the LNCBAR to judge whether the
metal surface will be strong enough to hold the LNCBAR plus desired
attachments.
In addition, its bar end hooks can be expanded to mount across a wide variety
of spans, such as vehicle hoods. Beyond expanding, the bar end hooks
articulate in two ways (rotating on its axis and revolving around a pivot
point as shown on page 4).
MAINTENANCE
Always clean and dry the LNCBAR after it has been exposed to wet, dusty, sandy
or salty conditions. Your LNCBAR is not recommended for use in or around salt
water. If required, clean LNCBAR using a mild soap solution applied with a
soft cloth, rinse with a fresh water and dry with soft towel. Remove any dust,
dirt or sand from locking mechanisms and all moving parts.
Carefully remove any ferromagnetic metal shavings from the magnets. Be careful
as some slivers my be sharp and may puncture and / or penetrate the skin.
LIMITED WARRANTY
Clore Automotive warrants this product to be free from defects in material or
workmanship for a period of 90 days from the date of original end user
purchase.
This warranty extends to each person who acquires lawful ownership within 90
days of the original retail purchase, but is void if the product has been
abused, altered, misused or improperly packaged and damaged when returned for
repair.
THE TERMS OF THE CLORE AUTOMOTIVE LIMITED WARRANTY CONSTITUTE THE BUYER’S SOLE
AND EXCLUSIVE REMEDY. IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THIS EX- PRESS WARRANTY. AFTER
90 DAYS FROM DATE OF PURCHASE, ALL RISK OF LOSS FROM WHATEVER REASON SHALL BE
PUT UPON THE PURCHASER.
CLORE AUTOMOTIVE SHALL NOT BE LIABLE FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES
UNDER ANY CIRCUMSTANCES: CLORE AUTOMOTIVE’S LIABILITY, IF ANY, SHALL NEVER
EXCEED THE PURCHASE PRICE OF THIS PRODUCT REGARDLESS OF WHETHER LIABILITY IS
PREDICATED UPON BREACH OF WARRANTY (EXPRESS OR IMPLIED), NEGLIGENCE, STRICT
TORT OR ANY OTHER THEORY.
Some states do not permit the limitation of warranties or limitation of
consequential or incidental damages, so the above disclaimer and limitation
may not apply to you. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
Instructions for obtaining service under this warranty:
If this product fails within the warranty period due to a defect in material
or workmanship, return it to your place of purchase for an exchange.
Registering Your Purchase
For best service and to receive periodic product updates, please visit
www.cloreregistration.com, click on the
Light-N-Carry logo, choose
your model number, complete the information in the web form and click
“submit.” It’s that easy!
For answers to questions concerning use, out-of-warranty service, or
warranty/service information on this or other Clore Automotive products,
contact:
Clore Automotive Technical Service
8600 NE Underground Drive, Pillar 248
Kansas City, MO 64161
800.328.2921
913.310.105
www.cloreautomotive.com
Clore Automotive
Kansas City, MO 64161
www.cloreautomotive.com
913.310.1050
© 2019 Clore Automotive
842-468-000