LABCONCO 160505120 Protector Class Mate Laboratory Hood Owner’s Manual

Table of Contents

Q: Is assembly required for the Protector ClassMate Laboratory Hood?
- A: The hood may require minimal assembly upon delivery, such as attaching fixtures or accessories, as outlined in the installation instructions.
Q: Can I modify the sash height on the hood?
- A: Yes, certain models allow for field modification of the sash height within specified limits. Refer to the user manual for detailed instructions on sash adjustments.
Q: What accessories are essential for operating the hood?
- A: Essential accessories include a remote blower, ductwork, work surface, and base cabinet or stand. Ensure proper installation and compatibility with the hood model.

The patented Protector ClassMate Laboratory Hood is designed to meet the needs of instructional laboratories.
Clear back and sides and taller front viewing windows provide enhanced visibility for conducting chemistry demonstrations or observing students using the hood.
The clear back also does not obstruct visibility when hoods are placed back-to-back in an island configuration.
Fully featured with baffle and airfoil, this high-performance by-pass hood maintains safe airflow while conserving energy.
The Protector ClassMate Hood is a benchtop design and is offered in 4′, 5′, and 6′ widths. Models with combination style sashes are also available.

Weight: 520.0 lbs
Weight metric: 235.9 kg
Dimensions: 60.0″ w x 32.7″ d x 59.0″ h
Dimensions metric: 152.4 x 81.9 x 149.9 cm
Electrical: 208-230V, 50/60 Hz, 5A
Product Subcategory: Educational
Nominal Width: 5′
Sash Movement Direction: Combination (Vertical & Horizontal)
Region: International, U.S., and Canada
Blower Requirements: Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, SEFA 8 (Cabinet Surface Finish), UL 1805, UL 61010
Lighting: LED
Style: Benchtop

Features (All Models)

SEFA 1 High-Performance Hood.
Patented design.
By-pass airflow design.
Glacier white powder-coated steel frame.
Ergonomic air foil with aerodynamic Clean-Sweep airflow openings.
Low-profile, ADA-compliant spill trough.
Clear, 1/4″ thick, tempered safety glass sides, back, and removable baffle.
5° angled, 1/4″ thick tempered safety glass stationary viewing panel and 3/16″ thick chain-driven sash with anti-racking shaft and powder-coated steel frame that provides 37.5″ high visibility.
Powder-coated sash handle with aerodynamic Clean-Sweep airflow openings.
High-performance, 3-piece glass baffle that pivots for cleaning.
Cord-Keeper slots on left and right side of air foil.
Pre-wired LED lighting, light switch and blower switch.
Powder-coated stainless steel tissue screen located directly below exhaust outlet.
Removable front panel, side panels and interior cover plates for access to plumbing and electrical wiring.
Powder-coated stainless steel 12.81″ ID exhaust connection.

Vertical-Rising Sash Models Feature

Sash stop at 18″ height from work surface (60% open). Can be field modified to 14″ from the work surface. The fully open sash is 28″ from the work surface.

Combination Sash Models Feature

Combination horizontal-sliding/vertical-rising sashes that allow the operator to use the hood with the sashes half open either horizontally or vertically.
Sash stop at 14″ height from work surface (50% vertical opening). Can be field modified to 18″ from the work surface. The fully open sash is 28″ from the work surface.

Fixtured Models May Feature

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided.
One pre-wired GFCI electrical duplex receptacle on the lower right side.

Required Accessories (Not Included)