NEW BRIGHT 84310U Remote Control LED RC Pro LYNX Buggy Instructions

NEW BRIGHT 84310U Remote Control LED RC Pro LYNX Buggy

Features

• Full Function Radio Control.
• 2.4GHz Frequency – allows up to 6 vehicles to run at the same time.
• Wheel Alignment -Adjust the wheel alignment located on bottom of vehicle between front wheels.
• Internal Lithium battery.
• Vehicle has working lights. when vehicle is powered ON, light will glow.

Features – Operated by the transmitter

• Forward and Reverse – Pull/Push Trigger.
• Left and Right Steering – Turn Wheel.

Batteries/Recharging Unit (Included)

• Transmitter – 2 “AA” batteries.
• Vehicle – Internal rechargeable Lithium Ion Battery.

Vehicle Battery Charging

1. Locate the ON/OFF Switch on the underside of vehicle and switch to the OFF position.
2. Locate the USB Charging Port on the underside of vehicle.
3. Insert the small end of the USB Charging Cord into the USB Charging port.
4. Connect large end of USB Charging Cord into any computer.
5. While charging, Charging Status Light will be on.
6. Charging Status Light will turn off when charging is complete. (Approx. 17-25 minutes when charging from a computer)
7. After charging is complete, store the USB cord in a safe place.

The Transmitter

1. Remove the screw to open the Battery Compartment Cover.
2. Insert 2 “AA” batteries in the battery compartment. Be sure the(+) and(-) are properly matched.
3. Replace the Battery Compartment Cover and replace the screw.

Pairing Transmitter with Vehicle

1. Install “AA” batteries in Transmitter as detailed above.
2. Turn Transmitter and Vehicle ON/OFF switch to the ON position.
3. Status light on transmitter will flash for pairing.
4. When status light stops flashing pairing is complete. You are now ready to play.

IMPORTANT!
The internal Lithium Ion battery pack is only PARTIALLY CHARGED prior to shipment and it is recommended the battery be fully charged before first use.

Caution:
Chargers used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and that, in the event of such damage, the toy must not be used with this charger cable until the damage has been repaired.

Notes:

1. Operate the vehicle within 80-100 feet (25-30 meters) range.
2. Switch off the toy when not in use.
3. Remove “AA” batteries in transmitter when not in use for long periods.
4. If vehicle is not functioning properly, make sure batteries in transmitter are fresh, vehicle is fully charged.
5. Adult supervision recommended.
6. Please remove all packaging attachments before giving this toy to your child.
7. Do not insert the USB cable into electrical socket outlets.
8. Do not use the included USB cable for purpose other than recharging this vehicle.
9. USB Power Adapter is not included.
10. To protect the battery and prolong its life, do not overcharge the vehicle.
11. This toy is only to be connected to equipment bearing either of the following symbols: or
    The reception performance may be affected under a strong interference disturbance environment.
    This product would not perform normally under a strong electrostatic environment.
    The instructions must be kept since it contains important information.
    We wish you many happy hours of pleasure with your New Bright toy.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>