NEW BRIGHT GGH6B Adio and Remote Control Toy Vehicles Owner’s Manual

June 1, 2024
NEW BRIGHT

NEW BRIGHT GGH6B Adio and Remote Control Toy Vehicles

NEW-BRIGHT-GGH6B-Adio-and-Remote-Control-Toy-Vehicles-product-
image

OWNER’S IVIANUAL

  • Please read and understand all precautions prior to use.
  • Thank you for choosing a premium New Bright product.

Proper Use

Precautions and Care

NEW-BRIGHT-GGH6B-Adio-and-Remote-Control-Toy-Vehicles-fig-
\(2\)

Support

Trouble shooting & Support

  • Problem – Vehicle does not move or moves slowly.
    • Make certain there are fresh alkaline batteries in the transmitter and that they have been installed in the correct position. You may need to re-sync the transmitter and vehicle. Refer to sync instructions in Transmitter Functions section.
    • Are the(+) and(-) markings on the alkaline batteries in the same position as the(+) and(-) markings in the Transmitter Battery Compartment?
    • Are the metal contact tabs touching, rusty or dirty in the transmitter?
    • Has the vehicle been fully charged?
    • Make certain that the vehicle ON/OFF switch is in the “ON” position.
  • Problem – Vehicle moves by itself or exhibits reduced range from the transmitter.
    • Make certain there are no outside radio interference in your area. The best way to test this is to take the vehicle as far away from radio towers, electrical lines or tall buildings as possible to ensure no further radio interference will occur.
  • Always remove Batteries from transmitter when not in use.
  • Do not dispose batteries in fire. Leakage, explosion and personal injury may occur.
  • Do not attempt jumps or tricks with this vehicle.
  • Do not attempt to remove internal battery.
  • Do not use included USS cord for anything other than its intended purpose. Always keep USB cord stored when not in use.
  • Adult supervision recommended.

F.C.C. CAUTION

  1. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  2. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  3. This device may not cause harmful interference, and
  4. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:

  • This equipment has boon 1ested and could to comply wi1h the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Intonation. This equipment generates, uses and can radiate radio frequency energy and, not installed and used In accordance with the Instructions, may cause harmful interference to radio communica1ions.
  • However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged 10 try to correct the interference by one or more of the following measures:
    • Reorient or relocate tile receiving antenna
    • Increase the separation between the equipment and receiver.
    • Connect the equipment W’lto an ounet oo a circuit different from that to which the receiver is coonected.
    • Consult the dealer or an experienced radio/TV technician for help.

USA & Canada 30-Day Limited Warranty

  • New Bright Industries warrants to the original purchaser that this product will be free of defects in materials and workmanship for thirty (30} days from the date of purchase. In the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resulting from unauthorized modifications, accident, misuse or abuse.
  • Should your item have a defect covered under this warranty, first call the toll free number listed below. Most problems can be resolved in this manner. If necessary, you will be issued a Return Authorization number (RA) and instructions on how to obtain a Product Return Form. The Product Return Form is to be used when returning a product to us (postage pre-paid and insured by the consumer).
  • When returning a defective product, please package the product, the Product Return From and a copy of the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned without a dated sales receipt. it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on your location).
  • New Bright Industries’ liability for defects in materials and workmanship under this warranty shall be limited to repair or replacement at our sole discretion. In no event shall we be responsible for incidental, consequential or contingent damages (except in those states that do not allow !his exclusion or limitation).
  • Valid only in the USA & Canada.
  • Contact New Bright Industries Customer Service Toll Free at:
  • Monday through Friday, 8:00 AM to 5:00 PM Eastern Time
  • U.S. Toy Sales and Marketing Co. Inc.
  • 30260 Oak Creek Olive – 2nd Floor
  • Wixom MI 48393
  • 1-877-624-8697
  • http://www.newbright.ccm/

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

NEW BRIGHT User Manuals

Related Manuals