SILVERCREST IAN452787_2310 Cordless Manicure Pedicure Set User Manual

SILVERCREST IAN452787_2310 Cordless Manicure Pedicure Set

Product Usage Instructions

Safety Instructions

Before using the product, familiarize yourself with all safety and operating instructions. If you pass on this product to others, make sure to provide all documents.

Getting Started

1. Unpack the product.
2. Charge the product using a separate power adapter (not included) to connect to the power grid for battery charging.

Usage Tips

• Apply a moisturizing cream after each treatment.
• Replace and dispose of the attachment if it shows signs of wear.

FAQ

Frequently Asked Questions

• Q: What should I do if the product is not charging?
  • A: Make sure you are using a compatible power adapter to charge the product. If the issue persists, contact customer support.
• Q: How often should I replace the attachments?
  • A: Replace the attachments when they show signs of wear or damage to ensure optimal performance and safety.

List of pictograms used

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of  the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use

• This product is intended solely for the care and maintenance of fingernails, toenails and feet.
• This product is only intended for private household use, not for commercial purposes.
• The manufacturer accepts no liability for damages caused by improper use.

Scope of delivery

After unpacking the product, check if the delivery is complete and if all parts are in good condition.
Remove all packaging materials before use.

• 1 Main unit
• 1 USB cord (type-A to type-C)
• 1 Dust cap
• 1 Storage bag
• 1 Sapphire callus remover
• 1 Cylindrical file
• 1 Flame file
• 1 Fine sapphire disc
• 1 Coarse sapphire disc
• 1 Felt cone
• 1 Sapphire cone
• 1 Crystal callus grinder
• 1 Ball cutter
• 1 Needle cutter
• 1 User manual

Description of parts

(Fig. A)

Main unit

• [1] Attachment fitting
• [2] LED light
• [3] + (button to increase speed)
• [4] – (button to reduce speed)
• [5] Indicator light (for rotating direction/speed/battery charge level)
• [6] Rotating direction button
  • ( red = counter-clockwise,
  • green = clockwise)
• [7] (On/off button)

Accessories

• [8] USB cord (type-A to type-C)
• [9] Dust cap
• [10] Needle cutter
• [11] Ball cutter
• [12] Crystal callus grinder
• [13] Sapphire cone
• [14] Felt cone
• [15] Coarse sapphire disc
• [16] Fine sapphire disc
• [17] Flame file
• [18] Cylindrical file
• [19] Sapphire callus remover
• [20] Storage bag

Technical data

Safety instructions

BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!

In the case of damage resulting from non-compliance with these operating instructions the warranty claim becomes invalid! No liability is accepted for consequential damage! In the case of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability is accepted!

WARNING! Risk of loss of life or accident to infants and children!

• Never leave children unsupervised with the packaging material. The packaging material represents a danger of suffocation.
• Children frequently underestimate the dangers.
• Always keep children away from the packaging material.
• This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved.
• Cleaning and user maintenance shall not be made by children without supervision.
• Children shall not play with the product.

WARNING! Risk of injury!

• Prior to use, check the product for visible external damage. Do not operate the product, if it has been damaged or dropped.
• All repairs must be carried out by authorised specialist companies or by the Customer Service department. Improper repairs can pose significant risks to the user. The warranty claim will also be invalidated.
• Extended use may cause extreme warming of the skin. Therefore, take frequent breaks. Otherwise, there is a risk of burns!

WARNING! Misuse may lead to injury. Use this product solely in accordance with this user manual. Do not attempt to modify the product in any way.

NOTICE! Risk of product damage! Do not expose the product to direct sunshine or heat. The ideal ambient temperature is between +5 °C and +50 °C.

• Extreme low or high temperature may damage the battery or the product.

WARNING! Risk of electric shock!

• Do not immerse the product in water or other liquids. Never hold the product under running water.
• Never use a damaged product. Disconnect the product from the power supply and contact your retailer if it is damaged.

WARNING! Risk of injury!

• Switch the product off and disconnect it from the power supply before cleaning work and when not in use.
• This product contains a lithium-ion rechargeable battery that is only replaceable by skilled persons. Do not throw the product into a fire.

WARNING! To charge the rechargeable battery: Only use a class II supply unit (not included in the scope of delivery) approved for use with household appliances.

• SELV output: DC 5 V, max. 1 A
• Recommended: Model number M26EU050100

WARNING! Keep the product dry.

• Do not use the product while bathing or showering.
• Never touch the product with wet or moist hands.
• Do not operate the product while it is being charged.
• Always charge the product in an open area away from flammable materials and liquids. Misuse can cause fire and burns.
• The product is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
• Protect the USB cord against damages.
• Do not let the USB cord hang over sharp edges, do not squeeze or bend it.
• Keep the the USB cord away from hot surfaces and open flames.
• Ensure that nobody can pull on or trip over the USB cord unintentionally.

NOTICE! Risk of product damage!

• Defective components must always be replaced with original replacement parts. Compliance with safety requirements can only be guaranteed if original replacement parts are used.
• Protect the product from penetration by moisture and liquids.
• Protect the product against knocks, dampness, dust, chemicals, direct sunshine, and extreme temperatures.
• Keep the product away from sources of heat (e.g. ovens, radiators).
• Never use or charge the product under blankets, pillows, etc.
• Do not store the product where it could fall into a bath tub or wash basin.
• Never submerse the product in water or other liquids.
• Ensure that the drive can always rotate freely.
• Otherwise, the product may overheat and be damaged beyond repair.
• The mains outlet that is used must be easily accessible so that the power adaptor * can be quickly removed from the mains outlet in the event of an emergency.
• In the event of a malfunction (unusual noises or smoke) or during thunderstorms, disconnect the power adaptor * from the mains outlet.
• To avoid damage caused by unwanted warming, do not cover the power adaptor *.
• Repairs to the product during the warranty period may only be carried out by a customer service department authorised by the manufacturer.
• Otherwise no additional warranty claims can be considered for subsequent damage.
• Do not place the product on hot surfaces, near hot surfaces or near an open fire.
• To prevent impermissible heating during use and charging, do not cover the USB Type A to Type C cable, mains adapter * and the product.

Attachments

INFO:

• Apply a moisturising cream after every treatment.
• Change and discard the attachment when it looks or feels worn.

***** Not included in the scope of delivery

particles

Do not apply pressure. It is recommended to use a low speed to prevent injuries.

Ball cutter [11]:| For careful removal of corns

Do not penetrate deep into the skin when removing the skin layer of the corn, to avoid injuries .

Crystal callus grinder [12:| For rapid and large-scale removal of thick hardened skin and calluses on the sole or heel of your foot
Sapphire cone [13]:| For removing dry skin, hardened skin or calluses on the soles and heels

Guide the sapphire cone [13] over the parts of the sole and heel to be treated using a circular motion while exerting gentle pressure . Do not press too firmly, and always guide the sapphire cone carefully to the surface to be treated.

Felt cone [14]:| For smoothing and polishing nail edges after filing, and for cleaning the nail surface

Use the felt cone [14] to polish and smooth the edge of the nail and to clean the nail surface after grinding . Always polish in a circular motion and never let the felt cone stay in one place.

Coarse and fine sapphire disc [15] [16]:| For filing and working the nails Work the edge of the nail using the coarse and fine sapphire disc [15] [16]. Since only the inner disc rotates and the outer edge does not move, you can file your nails accurately without damaging your skin with the rapidly rotating disc.

Always work from the outside of the nail to the tip.

---|---
Flame file [17]:| For freeing ingrown nails

Guide the flame file [17] carefully onto the treatment area and cut away the affected nail part.

Cylindrical file 18:| For grinding off thick toenail surfaces and rough smoothing of the surfaces

Always hold the cylinder file [18] parallel to the nail surface and apply light pressure and circular movements to remove the excess growth.

Sapphire callus remover 19:| For large-scale and gentle removal of thick hardened skin or calluses on the sole or heel of your foot

Guide the sapphire callus remover [19] over the parts of the sole and heel to be treated while exerting gentle pressure.

Dust cover

(Fig. B)

• The product can be used with or without the dust cap [9].
• Push the dust cap [9] on the product until it clicks into place.

First set-up of the product

Unpacking the product

1. Take the product out of the packaging and remove all packaging materials and plastic wrappings.
2. Check to make sure that all listed parts are included (see “Scope of delivery”).
3. Check whether the product and all parts are in good condition, if any damage or defect is detected, do not use the product, but follow the procedure described in chapter “Warranty”.

Charging the product

• NOTICE! Risk of product damage!
• To charge the rechargeable battery: Only use a class II supply unit (not included in the scope of delivery) approved for use with household appliances.
• SELV output: DC 5 V, max. 1 A
• Recommended: Model no. M26EU050100
• Do not leave the product permanently connected to the USB cord [8].

INFO:

• Switch off the product before charging the battery.
• When the battery level is low: The lowest part of the indicator light [5] flashes (red or green according to the rotating direction). Charge the product.
• Once the product runs out of battery: The lowest part of the indicator light [5] flashes 3× red. The product switches off automatically. Charge the product.

1. Connect the USB cord [8] to the product.
2. Connect the USB type-A connector on the USB cord [8] to a suitable power supply.
3. The blue indicator light [5] lights up according to the battery charge level:
4. After the battery is fully charged: Remove the USB cord [8] from the product.

Operation

• WARNING! Risk of electric shock! Only use the product with dry hands.
• WARNING! Risk of injury! Excessively long or intensive treatment can also injure deeper layers of skin.
• Therefore, check the treatment progress and results regularly. Diabetics in particular are less sensitive on their hands and feet.
• WARNING! Risk of burns due to severe heat development!
• While you are working, never let the attachments remain in one location. Friction leads to increased heat generation and may cause injuries.
• Always work with a circular motion.

INFO:

• There is a memory function for rotating direction and speed. The product remembers the settings of the last use.
• After 20 minutes of continuous operation: The product switches off automatically. Allow the product to cool down for at least 15 minutes before you switch it on again.
• Always start the treatment at the lowest setting and only increase it when necessary.

1. Before changing the attachment: Switch off the main unit each time.
2. Pull the attachment, if any, out of the attachment fitting [1].
3. Insert the appropriate attachment (see “Attachments”) for your purpose in the attachment fitting [1]. The attachment must sit securely.
4. Switch on the product: Press and hold [7] for 3 seconds. Release .
5. Select the rotating direction: Press the rotating direction button [6]. The lower part of the indicator light [5] shows the rotating direction:
6. Increase the rotation speed: Press [3].
7. Decrease the rotation speed: Press [4].
8. Switch off the product: Press [7].

INFO:

• Set the speed to the lowest setting after you changed the rotating direction or an attachment.
• If you have treated hardened skin, apply a moisturising cream to the treated areas after completing the procedure.
• The attachments do not have as much effect on softened skin. Therefore, do not carry out any pretreatment in a water bath before using the product.
• Always select the rotating direction for treating the nails in their direction of growth. If possible, treat the nails from the outside towards the inside (to the nail tip). Otherwise, the nails will split more easily.
• If you feel that the nails could crack during treatment, select the other direction.

Troubleshooting

product.
The product switches off automatically during use .| Too much pressure on the nail/skin .| Switch the product on again.

The product cannot be recharged .

| The ambient temperature in the charging location is too high .| Move the product away from direct sunshine or heat .

Cleaning and care

WARNING! Risk of electrical shock! Before cleaning: Always disconnect the USB cord [8] from the product.

• Do not use chemical, aggressive or abrasive cleaning agents. These can damage the surface of the product.
• Clean the product with a damp cloth. For stubborn soiling use a mild detergent on the cloth. Ensure that no water or moisture can penetrate the product. Dry all parts thoroughly.
• For hygienic reasons, we recommend cleaning the attachments with a clean cloth or brush moistened with alcohol after every use. Dry all parts thoroughly.

Storage

• After cleaning: Put the product into the storage bag [20].
• Store the product in a dry and clean location.
• Do not expose the product to direct sunshine or heat. The ideal ambient temperature is between –10 °C and +60 °C. Extreme low or high temperature may damage the battery or the product.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics/20–22: paper and fibreboard/80–98: composite materials.

Product:

The product and packaging materials are recyclable and are subject to extended producer responsibility.
Dispose them separately, following the illustrated Info-tri (sorting information), for better waste treatment.
The Triman logo is valid in France only.

• Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
• To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.
• Environmental damage through incorrect disposal of the batteries/rechargeable batteries!

Batteries/rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries/rechargeable batteries at a local collection point.

Ordering accessories

You can order the following replacement parts for this product:

• [10] Needle cutter
• [11] Ball cutter
• [12] Crystal callus grinder
• [13] Sapphire cone
• [14] Felt cone
• [15] Coarse sapphire disc
• [16] Fine sapphire disc
• [17] Flame file
• [18] Cylindrical file
• [19] Sapphire callus remover

Order replacement parts via our website: www.optimex- shop.com

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase.
Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product.

Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts. For this product, rechargeable battery is also covered by its warranty period.

Warranty claim procedure

To ensure quick processing of your claim, observe the following instructions:

• Make sure to have the original sales receipt and the item number (IAN 452787_2310) available as proof of purchase.
• You can find the item number on the rating plate, an engraving on the product, on the front page of the instruction manual (bottom left), or as a sticker on the rear or bottom of the product.
• If functional or other defects occur, contact the service department listed below either by telephone or by e-mail.
• Once the product has been recorded as defective you can return it free of charge to the service address that will be provided to you.
• Ensure to enclose the proof of purchase (sales receipt) and a short, written description outlining the details of the defect and when it occurred.

Service

Service Great Britain

• Tel.: 0800 0569216
• E-Mail: owim@lidl.co.uk

Service Ireland

• Tel.: 1800 200736
• E-Mail: owim@lidl.ie

Declaration of conformity

EU Declaration of conformity

OWIM GmbH & Co. KG

• Stiftsbergstraße 1 74167 Neckarsulm GERMANY
• Model No.: HG11493A/HG11493B
• Version: 04/2024

Scan

• PDF ONLINE
  • www.lidl-service.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>