LANCOM XS-3526YUP Fully Managed Access Switches User Guide

LANCOM XS-3526YUP Fully Managed Access Switches

Specifications

• Model: LANCOM XS-3526YUP
• Configuration Interfaces: RJ-45 & micro USB (Console)
• TP Ethernet Interfaces:
  • 1-16: 10M / 100M / 1G PoE+
  • 17-24: 1G / 2.5G / 5G / 10G PoE++
• SFP28 Interfaces:
  • 25-26: 10G / 25G
• Housing: Robust metal housing, 19″ 1U (442 x 44 x 375 mm > W x H x D) Number of Fans: 1
• Power Supply: Internal power supply unit

Product Usage Instructions

• Configuration Interface Connection
  Connect the configuration interface using the micro USB cable to the device for configuration. Alternatively, use the RJ-45 interface with the provided serial configuration cable.

• Connecting Ethernet Interfaces
  Connect interfaces 1-16 using Ethernet cables to your PC or LAN switch. For interfaces 17-24, use at least CAT6a/CAT7 standard cables to connect to your PC or LAN switch.

• SFP28 Interfaces
  Insert LANCOM SFP modules into interfaces 25-26. Ensure compatibility with SFP modules and refer to the mounting instructions on www.lancom-systems.com/SFP- module-MI

• Power Supply
  Supply power to the device via the power connector on the back using the provided IEC power cable or a country-specific LANCOM Power Cord. Connect to earth before powering up to avoid high touch current risks.

• LED Indicators
  Refer to the LED descriptions for system, port status, and PoE information. Use the Mode/Reset button for switching modes, device restart, and configuration resets.

FAQ
Q: How do I reset the device?
A: Press the Mode/Reset button for approximately 5 seconds until all port LEDs glow to perform a configuration reset and restart the device.

Hardware Quick Reference

LANCOM XS-3526YUP

1. Configuration interfaces RJ-45 & micro USB (Console)
   Connect the configuration interface via the included micro USB cable to the USB interface of the device you want to use for configuring / monitoring the switch. Alternatively, use the RJ-45 interface with the provided serial configuration cable.

2. TP Ethernet interfaces 10M / 100M / 1G PoE+
   Use Ethernet cables to connect interfaces 1 to 16 to your PC or a LAN switch.

3. TP Ethernet interfaces 1G / 2.5G / 5G / 10G PoE++
   Connect the interfaces 17 to 24 via Ethernet cable with at least CAT6a / CAT7 standard to your PC or a LAN switch.

4. SFP28 interfaces 10G / 25G
   Insert suitable LANCOM SFP modules into the SFP28 interfaces 25 to 26. Choose cables which are compatible with the SFP modules and connect them as described in the SFP modules mounting instructions: www.lancom-systems.com/SFP-module- MI

5. Power connector (device back side)
   Supply power to the device via the power connector. Please use the IEC power cable supplied or a country-specific LANCOM Power Cord.
   ATTENTION
   High touch current possible! Connect to earth before connecting the power supply.

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

• Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
• The power plug of the device must be freely accessible.
• Please note that support for third-party accessories (SFP and DAC) is not provided.

Please observe the following when setting up the device

• For devices to be operated on the desktop, please attach the adhesive rubber footpads
• Do not rest any objects on top of the device
• Keep all ventilation slots on the side of the device clear of obstruction
• Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

A System / Link/Act/Speed / PoE

B Mode- / Reset button

C TP Ethernet ports 10M / 100M / 1G PoE+

D TP Ethernet ports 1G / 2.5G / 5G / 10G PoE++

E SFP28 ports 10G / 25G

F Hardware

G Interfaces

H Package Content

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 112319 / 0624

LED description & technical details

References

• DoC - LANCOM Systems GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>