EDIFIER W800BT Pro Wireless Over Ear Headphones with Active Noise Cancellation Instruction Manual

EDIFIER W800BT Pro Wireless Over Ear Headphones with Active Noise

Cancellation

Specifications

• Product Name: W800BT Pro Wireless Over-Ear Headphones with Noise Cancellation
• Model: EDF200149
• Power ON/OFF: 1 second press and hold
• Bluetooth Version: Compatible with Bluetooth-enabled devices
• Charging Input: 5V 1A via USB-C cable
• Controls: Call, Music, Mode

Product Usage Instructions

Power ON/OFF
Press and hold the power button for 1 second to turn the headphones on/off.

First Pairing

1. Once powered on, the headphones will enter Bluetooth pairing mode automatically.
2. Select “EDIFIER W800BT Pro” in your device’s Bluetooth settings to connect.

Pairing for New Device

1. In the ON state, press and hold the button for about 3 seconds to enter Bluetooth pairing mode.
2. Select “EDIFIER W800BT Pro” in your device’s Bluetooth settings to connect.

Dual-Device Connection

1. Pair device A with the headphones successfully.
2. Press and hold the button for 3 seconds to re-enter Bluetooth pairing mode and connect device B.
3. Select “EDIFIER W800BT Pro” in both device A and device B settings to establish a dual-device connection.|

Reset

1. In the ON state, press the button 5 times to reset the headphones.
2. If successful, the headphones will enter Bluetooth pairing mode automatically.

Wired Listening
To listen via wired connection, use the USB-C cable. This will  isable Bluetooth mode for wired listening.

Frequently Asked Questions (FAQ):
Q: Can I use the headphones while charging?
A: When charging with a USB-C cable, the product functions as wired headphones, and Bluetooth features are unavailable.

Wireless Over-Ear Headphones with Active Noise Cancellation Model: EDF200149

Power ON/OFF

Press and hold the power button to power on/off.

First pairing

1. Once powered on, the headphones will automatically enter Bluetooth pairing mode.
2. Select “EDIFIER W800BT Pro” in your device setting to connect.

Pairing for new device

1. In ON state, press and hold the “ button for about 3 seconds to enter Bluetooth pairing mode.
2. Select “EDIFIER W800BT Pro” in your device setting to connect.
   Note: For subsequent use, the headphones will automatically connect to the device used last time.

Dual-device connection

1. Pair device A with the headphones successfully.
2. Press and hold the “ ” button for 3 seconds to re-enter Bluetooth pairing mode, and then select “EDIFIER W800BT Pro” in device B setting to connect.
3. Select “EDIFIER W800BT Pro” again in device A setting to connect, and the dual-device connection is done.
   Note: For subsequent use, the headphones will automatically reconnect to the two devices used last time.

Charging

Connect the headphones to a power source via the USB-C cable for charging.

Note

1. Make sure the USB-C port is completely dry before charging.
2.  When charging with a USB-C cable, the product is used as wired headphones and Bluetooth functions are unavailable.

Controls

• Call
• Music
• Mode

Note

1. x 1″ Press , “x 2” Double press , “—” Press and hold.
2. Default sound control: High Noise Cancellation / Ambient Sound / Noise Cancellation Off.
3. Download EDIFIER ConneX App for more customizable control settings.

Reset

1. In ON state, press the “ ” button 5 times to finish reset.
2. The headphones will automatically enter Bluetooth pairing mode if successful.

Wired listening

Connect to the headphones via the USB-C cable. Wired listening will automatically disable Bluetooth mode

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>