AKO D14545 Thermostatic Expansion Valves Instruction Manual
- September 19, 2024
- AKO
Table of Contents
AKO D14545 Thermostatic Expansion Valves
Product Specifications:
- Model : Wizard D145H4531
- Input Max Current : 16 A LN
- ControlSignal : 0-10 V (5K) / 4-20 mA (500)
- Power Supply : 90-240 V~ 50/60 Hz
Product Usage Instructions
Installation:
- Connect the power supply to the designated terminals.
- Connect the control signal input to the appropriate terminals based on the signal type.
- Ensure proper grounding by connecting the GND terminal to the ground.
Configuration:
- Set the desired parameters using the provided table WIZARD.
- Configure the inputs and outputs based on your specific application needs.
Operation:
- Power on the device using the supplied power source.
- Monitor the input and output signals to ensure proper functionality.
- Adjust settings as needed based on performance requirements.
WIRING DIAGRAM
Start-up
Select the most suitable INI value for the installation type according to the “WIZARD” table. The inputs and outputs will be assigned depending on the option selected. Columns R1 to R5 indicate the function assigned to each relay. Columns I1 to I6 indicate the function of each digital input
FUNCTION OF THE OUTPUTS
FUNCTION OF THE INPUTS
- x: Compressor or fan no
- a, b, c: Compressor stages
AKO ELECTROMECÁNICA , Avda. Roquetes, 30-38 S.A. 08812 • Sant Pere de Ribes. Barcelona • Spain.
Tabla “WIZARD”
In the case of floating condensation (F08=1), the highlighted inputs are configured as inputs for the ambient temperature probe.FAQ
Q: What should I do if the device does not power on?
A: Check the power supply connections and ensure that the voltage is within
the specified range.
Q: How can I calibrate the control signals?
A: Refer to the user manual for detailed calibration instructions or
contact customer support for assistance.
Q: Can I use this product with compressors equipped with inverters?
A: Yes, this product is compatible with compressors both with and without
inverters. Ensure proper configuration for your specific setup.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>