EATON N518-10M Duplex Multi Mode 50/125 Fiber Patch Cable Owner’s Manual
- September 18, 2024
- EATON
Table of Contents
N518-10M Duplex Multi Mode 50/125 Fiber Patch Cable
“`html
Specifications
- Model Number: N518-10M
- Connector Type: LC/ST
- Fiber Type: Duplex Multimode 50/125
- Cable Length: 10 meters (33 ft.)
- Bandwidth: Optimized for gigabit and 10Gbps networks
- Backward Compatibility: With 62.5 micron fiber
Product Usage Instructions
1. Installation
1. Identify the appropriate fiber optic hardware or NIC card
requiring multimode duplex cable with LC/ST connectors.
2. Connect the LC male connector to the corresponding port on
the hardware/device.
3. Connect the ST male connector to the other end of the cable
to complete the connection.
2. Cable Handling
1. Avoid bending the cable beyond its minimum bend radius to
prevent signal loss.
2. Handle the cable carefully to avoid damaging the
connectors.
3. Maintenance
1. Regularly inspect the connectors for dust or debris and clean
them using appropriate tools if necessary.
2. Store the cable in a clean and dry environment when not in
use.
FAQ
Q: What is the warranty period for this product?
A: The product comes with a lifetime limited warranty.
Q: Can this cable be used for 25Gbps networks?
A: The cable is optimized for gigabit and 10Gbps networks, but
it can also be used for 25Gbps networks with attenuation at 3.0
dB/km.
“`
Duplex Multimode 50/125 Fiber Patch Cable (LC/ST), 10M (33 ft.)
MODEL NUMBER: N518-10M
Features
Constructed with 50/125 micron cable Length – 10M Use on fiber and fibre
channel installations LC male to ST male connectors Higher bandwidth optimized
for gigabit and 10Gbps networks Backward compatible with 62.5 micron fiber
Built-in headroom for future applications
Specifications
OVERVIEW UPC Code Technology Optical Mode
CONNECTIONS Side A – Connector 1 Side B – Connector 1 Endface Polish
PHYSICAL Cable Jacket Color
037332123626 Multimode OM2
LC DUPLEX (MALE) ST DUPLEX (MALE) PC
Orange
1 / 3
Downloaded from Arrow.com.
Highlights
Perfect for use with Fibre Channel Controller Cards and Switches
Attenuation loss meets or exceeds the latest industry standards
Higher bandwidth, optimized for gigabit and 10Gbps networks
Backward compatible with 62.5 micron fiber
Built-in headroom for future applications
Premium PVC multimode patch cables
System Requirements
Any fiber optic hardware or NIC card requiring multimode duplex cable with
LC/ST connectors
Package Includes
10M duplex MMF cable LC/ST 50/125 fiber
Connector Color Cable Jacket Material Cable Jacket Rating Clad Diameter (microns) Core Diameter (microns) Number of Fibers Cable Length (ft.) Cable Length (m) Cable Length (in.) Minimum Bend Radius Shipping Dimensions (hwd / in.) Shipping Dimensions (hwd / cm) Shipping Weight (lbs.) Shipping Weight (kg) Fiber Cable Length
Gray; Red; Black LSZH OFNR 125 50 2 32.8 10.00 393.7 20 mm (Dynamic); 10 mm (Static) 0.10 x 5.20 x 6.40 0.25 x 13.21 x 16.26 0.20 0.09 10M (32.8 ft)
ENVIRONMENTAL Operating Temperature Range Storage Temperature Range Operating Humidity Range Storage Humidity Range
-4° to 140°F (-20° to 60°C) -4° to 140°F (-20° to 60°C) 5% to 85% RH, Non-Condensing 35% to 65% RH, Non-Condensing
COMMUNICATIONS Network Compatibility Attenuation @ 850NM Insertion Loss
1 Gbps (Gigabit); 10 Gbps; 25 Gbps 3.0 dB/km LC 0.20 dB; ST 0.20 dB
FEATURES & SPECIFICATIONS
Push/Pull Tabs
No
Breakout
No
Trunk
No
STANDARDS & COMPLIANCE Product Compliance
RoHS; REACH
WARRANTY & SUPPORT
Product Warranty Period (Worldwide)
Lifetime limited warranty
2 / 3
Downloaded from Arrow.com.
1000 Eaton Boulevard Cleveland, OH 44122 United States https://tripplite.eaton.com
© 2024 Eaton. All Rights Reserved. Eaton is a registered trademark. All other
trademarks
are the property of their respective owners.
3 / 3
Downloaded from Arrow.com.