Saramonic WT2S 2 Person 1 Ear HS Intercom Sys Instruction Manual

WT2S 2 Person 1 Ear HS Intercom Sys

“`html

Specifications:

• Product Name: WiTalk9 Wireless Intercom Headset System
• Transmission Range: Up to 500 m
• Battery Runtime:
  • Master Headset: Up to 10 hours
  • Remote Headset: Up to 15 hours

Product Usage Instructions:

1. General Overview

The WiTalk9 system is a full-duplex wireless intercom headset
system that provides clear communication within a range of up to
500 meters. It offers features such as in-app GPS tracking for
automatic frequency adjustment to minimize interference.

2. Charging and Battery Replacement

Ensure that the headsets are fully charged before use. The
master headset provides up to 10 hours of runtime, while each
remote headset supports up to 15 hours. The batteries are
replaceable and rechargeable.

3. Package Contents

The WiTalk9 system is available in different configurations
depending on your team size. Each package includes essential
components such as headsets, charging cases, replaceable batteries,
chargers, cushions, windscreen, carrying case, and accessories like
number sticker sheets and drawstring pouches.

4. Maintenance and Cleaning

Do not disassemble the unit if you are not a professional. Keep
the headsets away from heat sources, dust, and moisture. Clean the
unit using only a soft, dry cloth. Avoid holding your hand against
the microphone capsule cover for optimal performance.

FAQ:

Q: Can non-professionals disassemble the unit?

A: No, non-professionals are strictly prohibited from
disassembling the unit on their own.

Q: How should I clean the unit?

A: Clean the unit with only a soft, dry cloth to maintain its
performance.

Q: What is the battery runtime of the headsets?

A: The master headset provides up to 10 hours of runtime, while
each remote headset supports up to 15 hours.

“`

User Manual

Statement
Please read this manual carefully before using the product and strictly operate & store it in accordance with the instructions. Please save the manual for your future reference. If you need further assistance than the user manual, please consult your retailer for help or email us: info@saramonic.com.
Cautions
1. Non-professionals are strictly prohibited from disassembling this unit on their own. 2. Please keep it away from heat sources such as radiators or spotlights. 3. Please clean the unit with only a soft, dry cloth. 4. When using and storing, please keep away from dust and moisture. 5. For the best pick-up pattern, do not hold your hand against the microphone capsule cover.

General Introduction
The WiTalk9 system, a full-duplex wireless intercom headset system, provides a reliable transmission range up to 500 m. With Saramonic app connection, in-app GPS tracking will automatically change the frequency to address the interference.
WiTalk9 adopts ClearTalkTM, a three-microphone array noise cancellation algorithm with 360° coverage, features Light / Strong mode for clear crew communication. This system also comes with AGC algorithm and high volume for stable intercom in noisy environments with 130 dB SPL. The included aviation- grade condensation cushions reduce ambient noise further. The WiTalk9 system is ideal for medium-sized or major event scenes, such as media production teams, stage performances, recording entertainment programs, sports events, or fire drills.
Each headset comes with a rechargeable and replaceable battery. The runtime of the master headset is up to 10 hours. Each remote headset supports a 15-hour runtime.

Features
· 9-person system, HUB-free, and ready to use. Scalable to 30 users via wired cascading. · Cross-location communication via the LINK port to connect online meetings. Supports wireless connection to phones intercom under 4G / 5G roaming. · Dual-antenna for up to 500 m intercom. Interferencefree in areas with cluttered signals. · ClearTalkTM, a three-microphone array noise cancellation algorithm with 360° coverage, features Light / Strong mode for clear crew communication. · AGC algorithm and high volume for stable intercom in noisy environments with 130 dB SPL. · Saramonic App with essential functions in large icons for easy operation. AFH activation for seamless global use. · Encryption for secure communication and preventing frequency interference. · 10+ optional accessories with ear cushions, batteries, battery dock, etc. · IPX5-rated for rainy weather performance. Wind-noise isolation algorithm and microphone foam cover for dual wind-noise isolation. · Aviation- grade ear cushions with low-temperature condensing material for noise isolation, comfort, and sweat resistance.

1

Available Packages
The WiTalk9 system comes with various configurations for you to choose depending on your team size. This manual is for all WiTalk9 packages. The contents of each package are described below.

WiTalk9 SMH Single-ear WiTalk9 SRH Single-ear

Master Headset

Remote Headset

6-Slot / 10-Slot Charging Case Replaceable Battery

Charger for Charging Case On-Ear Foam Cushion

Condensation cushion Foam Windscreen

Carrying Case

Drawstring Pouch

Number Sticker Sheet

Sold Separately Link cable kit for cascade connection

3.5 mm TRRS to TRRS Audio Cable

USB-A to USB-C Adapter

3.5 mm TRRS Female to USB-A Sound Card

2

WiTalk9 WT2S
WiTalk9 SMH Single-ear Master Headset (1) WiTalk9 SRH Single-ear Remote Headset (1) Replaceable Battery (4) 6-Slot Charging Case (1) Charger for Charging Case (1) On-Ear Foam Cushion (2) Condensation Cushion (2) Headset Pad (2) Foam Windscreen for Microphone (2) Number Sticker Sheet for Headset (3) Drawstring Pouch for Headset (2) Carrying Case (1)
WiTalk 9 WT3S
WiTalk9 SMH Single-ear Master Headset (1) WiTalk9 SRH Single-ear Remote Headset (2) Replaceable Battery (6) 6-Slot Charging Case (1) Charger for Charging Case (1) On-Ear Foam Cushion (3) Condensation Cushion (3) Headset Pad (3) Foam Windscreen for Microphone (3) Number Sticker Sheet for Headset (3) Drawstring Pouch for Headset (3) Carrying Case (1)
WiTalk9 WT4S
WiTalk9 SMH Single-ear Master Headset (1) WiTalk9 SRH Single-ear Remote Headset (3) Replaceable Battery (8) 10-Slot Charging Case (1) Charger for Charging Case (1) On-Ear Foam Cushion (4) Condensation Cushion (4) Headset Pad (4) Foam Windscreen for Microphone (4) Number Sticker Sheet for Headset (3) Drawstring Pouch for Headset (4) Carrying Case (1)
WiTalk9 WT5S
WiTalk9 SMH Single-ear Master Headset (1) WiTalk9 SRH Single-ear Remote Headset (4) Replaceable Battery (10) 10-Slot Charging Case (1) Charger for Charging Case (1) On-Ear Foam Cushion (5) Condensation Cushion (5) Headset Pad (5) Foam Windscreen for Microphone (5) Number Sticker Sheet for Headset (3) Drawstring Pouch for Headset (5) Carrying Case (1)

WiTalk9 WT6S
WiTalk9 SMH Single-ear Master Headset (1) WiTalk9 SRH Single-ear Remote Headset (5) Replaceable Battery (12) 10-Slot Charging Case (1) Charger for Charging Case (1) On-Ear Foam Cushion (6) Condensation Cushion (6) Headset Pad (6) Foam Windscreen for Microphone (6) Number Sticker Sheet for Headset (3) Drawstring Pouch for Headset (6) Carrying Case (1)
WiTalk9 WT7S
WiTalk9 SMH Single-ear Master Headset (1) WiTalk9 SRH Single-ear Remote Headset (6) Replaceable Battery (14) 10-Slot Charging Case (1) Charger for Charging Case (1) On-Ear Foam Cushion (7) Condensation Cushion (7) Headset Pad (7) Foam Windscreen for Microphone (7) Number Sticker Sheet for Headset (3) Drawstring Pouch for Headset (7) Carrying Case (1)
WiTalk9 WT8S
WiTalk9 SMH Single-ear Master Headset (1) WiTalk9 SRH Single-ear Remote Headset (7) Replaceable Battery (16) 10-Slot Charging Case (1) Charger for Charging Case (1) On-Ear Foam Cushion (8) Condensation Cushion (8) Headset Pad (8) Foam Windscreen for Microphone (8) Number Sticker Sheet for Headset (3) Drawstring Pouch for Headset (8) Carrying Case (1)
WiTalk9 WT9S
WiTalk9 SMH Single-ear Master Headset (1) WiTalk9 SRH Single-ear Remote Headset (8) Replaceable Battery (18) 10-Slot Charging Case (1) Charger for Charging Case (1) On-Ear Foam Cushion (9) Condensation Cushion (9) Headset Pad (9) Foam Windscreen for Microphone (9) Number Sticker Sheet for Headset (3) Drawstring Pouch for Headset (9) Carrying Case (1)

3

Product Structure WiTalk9 SMH Single-ear Master Headset

Mic Indicator Environmental Noise Cancellation (ENC) Button

Operation

Status

Mic Indicator Voice Prompt

Press once

Strong ENC Weak ENC

Static green Static blue

Strong Weak

Cascade

connection Static purple

No

Press and hold enabled

for 3 seconds

Cascade connection
disabled

Back to previous status

No

· The headset defaults to weak noise cancellation mode. · The cascade connection feature is turned off by default. For more details, please refer to ” TRRS Jack for Wired Link “. Battery Compartment Switch Slide down the battery compartment switch to open its cover, then remove the battery for charging or insert the battery for use.

Power Button Press and hold for 2 seconds to power on or off. There is a voice prompt of “Power on” from the master headset if turned on, or a voice prompt of “Power off” if turned off. USB-C Charging Port (5 V / 1 A) For charging the headset. Volume Control / Announce Button

Operation

Function

Voice prompt

Rotate clockwise

Increase volume

No

Rotate counter clockwise

Decrease volume

No

Press and hold

Enable Announce

Du

· By activating the Announce feature (the master headset only), the system will mute all paired remote headsets and their mic indicators will blink red slowly, allowing the whole team to hear the direct instructions or commands from the master headset. · To use the Announce function, press and hold the Announce button to talk and then release the button to mute yourself. You can unmute yourself via the mute button or boom. Boom

Operation Function Mic Indicator Voice Prompt

Flip up

Mute on

Static red

Du

Fold down Mute off Static blue / green

Du

Mute Button

Operation Function Mic Indicator Voice Prompt

Mute on

Static red

Du

Press once

Mute off Static blue / green

Du

TRRS Jack for Wired Link · Plug in the link cable kit for cascade connection (sold separately) to connect the headset to a device with a TRRS jack, achieving audio monitoring at site.

· Plug in the link cable kit to connect the master headset of the first WiTalk9 system to the remote headset of the second WiTalk9 system, accommodating expanded communication needs. It can be cascaded with up to 4 systems.

4

Panel on Master Headset

· Plug in the link cable kit to connect your phone or computer. With your phone or computer connected, the headset can attend any cloud conference anytime running on ZOOM, Tencent Meeting or other meeting applications on your phone or computer, bringing your remote and in-person teams together. Note: You need to press and hold the ENC button for 3 seconds to turn the cascade connection on, allowing these two teams to communicate with each other. In view of the compatibility of different smart phones, Saramonic suggests to use the USB-C adapter of the link cable kit with your smart phone.
Nameplate for Master Headset (M)

Group A Indicator Note: You need to purchase an HUB to activate it.

Power Indicator

Status

Power Indicator Voice Prompt

Unpaired or not reconnected

Blinking blue slowly

No

Disconnected (beyond operating range)

Blinking blue slowly

No

Successfully paired or reconnected

Static blue

No

Charging via USB-C charging port

Static red

No

Fully charged

Static blue

No

Low battery (10%)

Blinking red rapidly

Battery level low (per 10
minutes)

· Remote headsets can NOT communicate with each other if the master headset is powered off. · The master headset will automatically power off if unpaired for 30 minutes. · With the master headset on, you can purchase a USB cable for charging while using.

Wireless Link Indicator Only the master headset has the wireless link feature, and the remote headset does not have this feature. Press and hold the mute button on the master headset for 3 seconds to turn on its wireless link. Then you need to activate Bluetooth on your phone or computer, and search for WT9-M Audio to pair up. The master headset can be connected for listening to music, calls and cloud meetings from your phone or computer.

Status

Wireless Link Indicator

Voice Prompt

Wireless link on

Blinking blue rapidly Pairing

Wireless link off

Back to previous status

No

Unpaired

Blinking blue slowly

No

Successfully paired

Static blue

Pairing success

Disconnected (beyond operating range)

Blinking blue rapidly Disconnected

Unpaired or disconnected for 5 minutes

Off

No

5

Note: The link history will be cleared after the master headset is restarted. The wireless link and wired link features can not be used simultaneously. If the wired link feature is activated and connected, its wireless link feature will be automatically disconnected.
Group B Indicator Note: You need to purchase an HUB to activate it.
WiTalk9 SRH Single-ear Remote Headset

Battery Compartment Switch Slide down the battery compartment switch to open its cover, then remove the battery for charging or insert the battery for use. Power Button Press and hold for 2 seconds to power on or off. There is a voice prompt of “Power on” or “Power off” from the remote headset. USB-C Charging Port (5 V/1 A) For charging the headset. Volume Control / PTT Button

Operation

Function

Voice prompt

Rotate clockwise

Increase volume

No

Rotate counter clockwise

Decrease volume

No

Press and hold

Enable PTT

Du

If you are using the remote headset, and you do not want all your voice to be captured by the microphone when you have less frequent contact with your team, it is recommended to enable the PTT function. Once activated, press the volume control to talk, and then release to mute. You can unmute yourself by pressing the mute button once or folding down the boom. Boom

Operation Function Mic Indicator Voice Prompt

Flip up

Mute on

Static red

Du

Fold down Mute off Static blue / green

Du

Mute Button

Operation Function

Mic Indicator Voice Prompt

Mute on

Static red

Du

Press once

Mute off Static blue / green

Du

TRRS Jack for Wired Link Its function is consistent with the TRRS jack for wired link of the master headset. For details, please refer to ” TRRS Jack for Wired Link” of the master headset. Nameplate for Remote Headset (R)

Panel on Remote Headset

Mic Indicator Environmental Noise Cancellation (ENC) Button

Operation

Status

Mic Indicator Voice Prompt

Press once

Strong ENC Weak ENC

Static green Static blue

Strong Weak

Cascade

connection Static purple

No

Press and hold enabled

for 3 seconds

Cascade connection
disabled

Back to previous status

No

· The headset defaults to weak noise cancellation mode. · The cascade connection feature is turned off by default. For more details, please refer to ” TRRS Jack for Wired Link ” of the master headset.

Group A Indicator Note: You need to purchase an HUB to activate it.

6

Power Indicator

Status

Power Indicator Voice Prompt

Unpaired or not reconnected
Disconnected (beyond operating range)
Successfully paired or reconnected
Charging via USB-C charging port

Blinking blue slowly

No

Blinking blue slowly Disconnected

Static blue

Connected

Static red

No

Fully charged

Static blue

No

Low battery (10% )

Battery level Blinking red rapidly low (per 10
minutes)

· Remote headsets can NOT communicate with each other if the master headset is powered off. · The remote headset will automatically power off if unpaired for 10 minutes. · With the remote headset on, you can purchase a USB cable for charging while using.

Group B Indicator Note: You need to purchase an HUB to activate it.

Charging Case When the charging case is connected to power, put batteries into it for charging.
6-slot charging case

Operation Guide How to Wear
1. Adjust the headband for a comfortable fit according to your head size. 2. Flexible boom with 270-degree pivot range for leftor right-side wear.
2-3cm
3. Position the microphone approximately 2 ~ 3 cm away from the edge of your mouth to avoid “popping” or other breath noise and do not place directly in front of your mouth.

10-slot charging case

Charging Indicator

Charging

Fully charged

Slot for Battery

DC Jack with A Screw Nut

4. While using, please do not cover the antenna area shown in the figure above to avoid signal interference, and do not handle the antenna to avoid damage. How to Use The WiTalk9 system automatically pairs up right out of the box. Press and hold the power button for two seconds to turn on each headset to get used.
7

How to pair
The WiTalk9 system automatically pairs up right out of the box. If disconnection occurs, please follow the below steps: Note: To ensure successful pairing, it is recommended to operate the master headset to forget paired headsets before manual pairing. For more details, please refer to”How to forget paired headsets” below. (1) With the master headset off, press and hold its power button for 8 seconds until its power indicator blinks blue rapidly and music plays. Then the master headset will enter pairing mode. (2) With the remote headset (1#) off, press and hold its power button for 8 seconds until its power indicator blinks blue rapidly and music plays. Then the remote headset (1#) will enter pairing mode. Follow this step to operate all remote headsets (2/3/4/5/6/7/8#) to enter pairing mode. (3) If you hear a voice prompt of “Connected” from the remote headset (1#), the connection between this remote headset (1#) and the master headset is established. All remote headsets (2/3/4/5/6/7/8#) will pair with the master headset in sequence.

Note: If the master headset forgets paired headsets, all paired remote headsets will be forgotten and you do not need to operate remote headsets to forget the paired master headset.
Other Functions
Sidetone
Simultaneously press the volume control and mute button once to enable or disable the sidetone function, and a voice prompt of “du” will appear. · Once this function is activated, you can hear yourself when you are speaking. There will be a hearing delay, which is normal. · Make sure the headset is worn on your head once you activate this function, otherwise howling noise will appear. · It is recommended that you do not enable the sidetone feature when the cascade connection is activated and connected. Otherwise, current sound will generate and bring you a bad audio experience. · This function can NOT be enabled when the headset is muted.

Reset

With the master headset or remote headset off, press

and hold the power button and volume control at the

same time for 8 seconds to reset the headset. All its

indicators will glow static blue while resetting. The

8s

master headset or remote headset will shut down and

all its indicators will turn off after successful resetting.

8s
How to exit pairing You will be ready to communicate with your team after the master headset exits pairing status. Its power indicator will glow static blue if the master headset exits pairing mode. Choose one of the following ways to exit pairing: (1) The master headset will automatically exit pairing if it is fully paired (with 8 remote headsets). (2) If the master headset is not fully paired, press its power button once to exit the pairing status.
How to forget paired headsets With the master headset off, simultaneously press and hold its power button and mute button for 3 seconds until its power indicator blinks blue and red alternately, then it will forget all paired remote headsets. The master headset will automatically shut down after successful forgetting.

App Control
Supports real-time monitoring of the current battery level of the device, connection status, and their names; Supports manually muting the remote headset, a separate 1 v 1 communication, and the Announce feature, the master headset pairing, the master headset forgetting paired headsets; Supports customized names, firmware updates for the device. Wireless connection to Saramonic app: Step1: Download Saramonic app on your phone or computer and launch it.
Step2: Enter the home page, click “Add Device” on the top left and search for Bluetooth, then click “WiTalk9” in the Bluetooth list to connect them.
Step3: Click “View Device” on the current page to enter the WiTalk9 device management page; Or return to the home page and click “Device Management” to enter the device management page. Note: You need to open the Saramonic app, then search for and connect WiTalk9 in the Bluetooth list in the Saramonic app. If you directly search for and connect WiTalk9 in the Bluetooth list of your phone system, app control is not available. You need to disconnect them or forget this device, then follow the above steps to achieve app control.

8

Troubleshooting
If you encounter any problems while using the unit, please refer to the following first. If the problem still persists, please contact the dealer’s after-sales service department.
· Failed to power on Make sure the battery level of the headset is not low.
· The charging status does not be displayed when plugged into the charging cable If the current battery level is full, try using the battery for a period of time.
· No music from the master headset in pairing mode Make sure the master headset does not automatically reconnect with the last paired device (mobile phone / computer). You may press and hold its mute button for 3 seconds when the master headset is turned on, then you will hear the music when its wireless link indicator flashes blue and enters pairing mode.
· The master or remote headset automatically shuts down when the pairing is not completed When not paired, the master headset will automatically shut down after 30 minutes and the remote headset will automatically shut down after 10 minutes. Therefore, turn it on and get started.
· The remote headset fails to reconnect with the master headset The master headset may have forgotten paired headsets, and all paired headsets are forgotten. Therefore, you may pair them manually.
· No sound from the headset (1) Make sure the master headset and the remote headset are paired up successfully. (2) Make sure your headset is not muted. Its mic indicator glows red when muted. You can unmute it via pressing the mute button or folding down the boom. (3) Make sure the headset is not muted by Saramonic app. If it is muted by this app, you need to unmute it by this app. · The master and remote headsets have been paired but speaking voice cannot be heard Make sure the master headset exits pairing mode.
FAQ
· Will the master and remote headset need to be paired again after resetting? Yes. Resetting is to restore the current headset to default parameters, which will forget the paired headsets.
· Will link channels be muted when the master or remote headset are muted? No. The mute function does not mute link channels.
· Will the voice prompt be heard by other headsets? No. The voice prompt can only be heard in the current headset, and will not be transmitted to other headsets, or link channels.

· Will the remote headset need to re-establish the connection with the master headset if they are disconnected due to exceeding the operating range? No. They will automatically reconnect within the operating range.

· Will the customized name of the remote headset that is renamed by Saramonic app be retained the next time when it reconnects with the master headset? Yes.

· Can the Announce function be activated when the master headset is muted? Yes, this function can be activated regardless of whether it is in mute mode or not.

· Can the PTT function be activated when the remote headset is muted? Yes, this function can be activated regardless of whether it is in mute mode or not.

Specifications

WiTalk9 SMH Single-ear Master Headset / SRH Single-ear Remote Headset

Transmission Range

500 m

Modulation Mode

GFSK

Sampling Rate Voice Delay

16 kHz / 16-bit (with 8 remote headsets connection)
83 ms (with 8 remote headsets connection)

Receiving Sensitivity

< -93 dB

Noise Cancellation Depth 50 dB

Frequency Response

150 Hz – 8 kHz

Signal-to-Noise Ratio

65 dB

Distortion

< 1%@94 dB SPL, 1 kHz

Microphone Type

Electret

Input SPL

100 dB SPL

Output SPL

128 dB

Replaceable Battery Capacity Power Requirements
Runtime

1450 mAh
Powered by a replaceable battery / USB-C charging port
Master headset: 10 h (with 4 remote headsets connection); 9 h (with 8 remote headsets connection)

Remote headset: 15 h

Charging Time Weight Working Temperature

3.5 h (charging via USB-C port in shutdown mode)
228 g (on-ear foam cushion and battery included)
-10 ~ 50

Storage Temperature

-20 ~ 55

9

6-Slot Charging Case

Port

DC jack

Dimensions

153×127×31 mm

Weight

192.5 g

Charging Power

< 20 W

Power Supply Range

12 V±10%

Current

< 1.6 A

Charging Time Working Temperature

3.5 h 0 ~ 50

Storage Temperature

-10 ~ 60

10-Slot Charging Case

Interface

DC jack

Dimensions

231×127×31 mm

Weight

298 g

Charging Power

< 34 W

Power Supply Range

12 V±10%

Current

< 2.8 A

Charging Time Working Temperature Storage Temperature

3.5 h 0 ~ 50 -10 ~ 60

10

info@saramonic.com

WiTalk9 500 App GPS

1. 2. 3. 4. 5.

ClearTalkTM Saramonic 360 / AGC 130 dB
10 15

· 9 HUB 30 · Link 4G/5G · 500 · ClearTalkTM 360 / · AGC + 130dB · Saramonic · · · IPX5 ·

11

WiTalk9 WiTalk9 :

WiTalk9 SMH WiTalk9 SRH

6 / 10

3.5 mm TRRS TRRS

3.5 mm TRRS USB-A

USB-A USB-C

12

WiTalk9 WT2S
WiTalk9 SMH (1) WiTalk9 SRH (1) (4) 6 (1) (1) (2)

(2) (2) (2) (3) (2) (1)

WiTalk 9 WT3S
WiTalk9 SMH (1) WiTalk9 SRH (2) (6) 6 (1) (1) (3)

(3) (3) (3) (3) (3) (1)

WiTalk9 WT4S
WiTalk9 SMH (1) WiTalk9 SRH (3) (8) 10 (1) (1) (4)

(4) (4) (4) (3) (4) (1)

WiTalk9 WT5S
WiTalk9 SMH (1) WiTalk9 SRH (4) (10) 10 (1) (1) (5)

(5) (5) (5) (3) (5) (1)

WiTalk9 WT6S
WiTalk9 SMH (1) WiTalk9 SRH (5) (12) 10 (1) (1) (6)

(6) (6) (6) (3) (6) (1)

WiTalk9 WT7S
WiTalk9 SMH (1) WiTalk9 SRH (6) (14) 10 (1) (1) (7)

(7) (7) (7) (3) (7) (1)

WiTalk9 WT8S
WiTalk9 SMH (1) WiTalk9 SRH (7) (16) 10 (1) (1) (8)

(8) (8) (8) (3) (8) (1)

WiTalk9 WT9S
WiTalk9 SMH (1) WiTalk9 SRH (8) (18) 10 (1) (1) (9)

(9) (9) (9) (3) (9) (1)

13

WiTalk9 SMH

USB-C 5 V/1 A /

· ·

/

/

TRRS Link · TRRS

Strong Weak

3

· · ” TRRS Link ” / 2 “Power on” “Power off”

14

· WiTalk9 WiTalk9 SMH WiTalk9 4

A

· 3.5 mm TRRS TRRS 3 Saramonic USB

/

/

(USB-C

10%

Battery level
low (10 /

· · 30 ·

M

Link 3 Link / WT9-M Audio 4G/5G

Link

Link

Pairing

Link

Pairing success

Disconnected

/ 5

Link Link Link Link Link

B

15

WiTalk9 SRH

PTT

PTT

/

/

TRRS Link TRRS Link ” TRRS Link ” R

WiTalk9 SRH

Strong Weak

3

· · ” TRRS Link ” / 2 “Power on” “Power off” USB-C 5 V/1 A /PTT

A

/
/

Disconnected
Connected

(USB-C

10%

Battery level
low (10 /

· · 10 ·

16

B

6

2-3cm
3. 2 ~ 3 cm “”

10

2
“” 1 8 , 21# 8 1# 2/3/4/5/6/7/8# 31#”Connected”1# 2/3/4/5/6/7/8#

1. 2. 270°

17

App App Saramonic

Saramonic App , ” ” WiTalk9

8s

“” WiTalk9

“”

WiTalk9

App Saramonic App App

WiTalk9 App

WiTalk9

8s

Saramonic App

(1) (2)

3

/ “” · · · ·
8
App 1v1 ;

·
·
· Link / Link 3 Link
· / 30 10
·
· 1 2 3 App App
·

18

· / /
· / Link Link Link
· / / Link
·
· App
·
· PTT PTT

6

WiTalk9 SMH /WiTalk9 SRH

500

GFSK

16 kHz / 16-bit

83 ms

-93 dB

50 dB

150 Hz – 8 kHz

65 dB

1%@94 dB SPL1 kHz

100 dB SPL

128 dB

1450 mAh

10

/ USB-C
: 10 h; 9 h 15 h 3.5 h USB-C 228 g -10 ~ 50 -20 ~ 55
DC 153 x 127 x 31 mm 192.5 g < 20 W 12 V±10% <1.6 A 3.5 h 0 ~ 50 -10 ~ 60
DC 231 x 127 x 31 mm 298 g < 34 W 12 V±10% < 2.8 A 3.5 h 0 ~ 50 -10 ~ 60

19

20

21

22

For better recording experience, the application Saramonic is recommended.
Saramonic Saramonic

Shenzhen Jiayz Photo Industrial., Ltd
A16 Building, Intelligent Terminal Industrial Park of Silicon Valley Power, Guanlan, Longhua District, Shenzhen, China A16

400-613-1096

www.saramonic.com

info@saramonic.com

References

• Saramonic-Premium Microphones, Headphones and other Pro Audio Accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>