GVISION Ip Series 18.5 Inch Security CCTV Monitor User Manual
- September 19, 2024
- GVISION
Table of Contents
Ip Series 18.5 Inch Security CCTV Monitor
IP SERIES
USER’S MANUAL
SECURITY CCTV MONITOR
GVISION USA, INC
30398 Esperanza, Rancho Santa Margarita CA 92688 / 949.586.3338 / info
@gvision-usa.com
Important Information
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE
OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM
WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE
POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have
sufficient magnitude to cause electric shock.
Therefore, it is dangerous to make any kind of contact with any part
inside this unit.
This symbol alerts the user that important literature concerning the operation
and maintenance of this unit has been included.
Therefore, it should be read carefully in order to avoid any problems.
CAUTION: Please use the power cord provided with this display in
accordance with the table below. If a power cord is not supplied with this
equipment, please contact GVISION. For all other cases, please use the power
cord with the plug style that matches the power socket where the monitor is
located. The compatible power cord corresponds to the AC voltage of the power
outlet and has been approved by, and complies with, the safety standards in
the country of purchase.
*When operating this monitor with its AC 125-240V power supply, use a power supply cord that matches the power supply voltage of the AC power outlet being used.
Care and Cleaning
- Always unplug your monitor from the wall outlet before cleaning. Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.
- Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered. Your monitor should never be placed near or over a radiator or heat source, or in a built-in installation unless proper ventilation is provided.
- Never push objects or spill liquid of any kind into this product.
Safety Precaution
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
this does not guarantee that interference will not occur in a particular
installation. If this equipment causes harmful interference to radio or
television receptions, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by that
party responsible for compliance could void your authority to operate the
equipment.
This device complies with Part 15 FCC Rules. Operation is subject to the
following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired.
About This Manual
The purpose of this manual is to assist the user on how to operate the monitor which is described in this manual. This manual is subject to rigid quality control. However, this does not guarantee that this manual is without errors. We reserve the right to make changes to the manual without prior notice. Before operating the appliance, please read this manual carefully and retain it for further reference. Verify that all appliance items are included in the delivery. If any items listed on this manual are missing, do not operate the appliance and contact your local dealer. Never attempt to repair the appliance yourself. This should only be done by qualified service personnel. Improper handling of the appliance will invalidate the warranty.
Package of Contents
LCD IP Monitor| X1
Power Cord| X1
User Manual(Replaced for Online Download)| X1
12V Power Adapter| X1
Features
- H.264/H.265 compression format
- Support Max.5MP IP camera.
- Graphical and text interfaces (GUI)
- Use Ethernet connection control
- Support HDMI/VGA/DVI-D input
- Supports Max. 16CH/32CH network cameras via HUB/Switch
- Supports ONVIF compliance, Real Time Streaming Protocol
- Protectable Metal casing. VESA standard
Monitor Mounting Guide
1.1 Desktop
Adjust the viewing angle of the LCD to achieve the most comfortable monitoring
position.
1.2 Wall Mount
Maximize your space with the wall mount design. To install the LCD on the
wall, please align and use the provided fix-hole size on the back panel.
1.3 VESA Bracket
Controller and Setting
2.1 Monitor Controller Button
1| POWER UP ▲
DOWN ▼
ITEM| Push to turn on and turn off the unit
---|---|---
2| Used as UP function. Or Increase value on the OSD Menu. And as a hot key
for color adjust function
3| Used as DOWN function. Or Decrease value on the OSD Menu. And as a hot key
for auto adjust function.
4| Hot key for OSD adjustments of Volume, Contrast, Brightness, and Red,
Green, Blue.
5| MENU| Push to call out OSD menu. Or Used as Confirm function in OSD Menu.
6| SOURCE| Select input signal from D-SUB, HD, DVI, and IP.
KEY Lock Function:
To activate the key lock mode, press the “Menu” and “Item” buttons
simultaneously. The OSD on the screen will display “Key Lock on.” To
deactivate the key lock mode, press the same buttons again, and the OSD will
show “Key Lock off,” indicating that the key lock mode is now disabled.
2.2 Connections: HDVS IP Series
| 1 | RJ-45 (Ethernet Interface) |
|---|---|
| 2 | USB IN x2 (USB Mouse/Record Backup |
Connector)
3| e-SATA (Backup Storage)
4| DC 12V IN
5| DVI IN
6| Full HD IN
7| VGA IN
8| AUDIO L/R IN
9| Earphone OUT
2.3 OSD Function
2.3.1 Color
| Contrast | Adjust background black level of the screen image. |
|---|---|
| Brightness | Adjust ground white level of the screen image. |
Color Adjust
Color Temp Back| Adjust Red, Green, Blue, color deepness for Users.
Adjust color temperatures for users. 9300, 6500, 5800, sRGB, USER
Exit OSD menu.
2.3.2 Image Setting
Clock Phase Sharpness
H. Position| Adjust image distortion appearing as vertical or “noise” on the
screen.
---|---
Adjust image distortion appearing as horizontal or “noise” on the screen.
Adjust the clarity and focus of the screen images.
Move the screen image left or right.
V. Position
Back| Move the screen image up and down.
Exit OSD menu.
2.3.3 OSD Menu
OSD H. Pos
OSD V. Pos
OSD Timer| Move the OSD menu position left or right.
---|---
Move the OSD menu position up or down.
Set the OSD menu display time.
Language| Select the desired language as English, French, German, Spanish,
Traditional Chinese Simplified Chinese, and Japanese.
Back| Exit OSD menu.
2.3.4 Signal Source
| Signal Source | Select the input signal VGA, HD, DVI, and IP. |
|---|---|
| Back | Exit OSD menu. |
2.3.5 Audio
Volume
Mute| Control built-in speakers’ output Volumes.
---|---
Disable the unit’s sound output.
Back| Exit OSD menu.
2.3.6 Mics
| Auto Adjust | Adjust the best image. |
|---|
Color Adjust
Reset Screen saver| Adjust the best image color.
Return to factory default setting
Use the manual buttons to on/off the screen saver.
2.3.7 Back
| Back | Exit OSD menu. |
|---|
2.4 PC Timing
| Mode | Resolution |
|---|---|
| 1 | 800×600@60Hz |
| 2 | 800×600@72Hz |
| 3 | 800×600@75Hz |
| 4 | 1024×768@60Hz |
| 5 | 1024×768@70Hz |
| 6 | 1024×768@75Hz |
| 7 | 280×1024@60Hz |
| 8 | 1280×1024@75Hz |
| 9 | 1360×768@60Hz |
| 10 | 1920×1080@60Hz |
Specifications
| MODEL | IP24BD-OK-400T | IP24BD-OK-400TD |
|---|---|---|
| Screen Size | 24in | 24in |
| Resolution | 1920 x 1080 | 1920 x 1080 |
| Display Are (mm) | 527.04(H) x 294.16(V) | 527.04(H) x 294.16(V) |
| Brightness (MAX) | 250cd/m² | 250cd/m² |
| Response Time | 5ms | 6ms |
| Aspect Ratio | 16:09 | 16:09 |
| Viewing Angle | 178°(H)/178°(V) | 178°(H)/178°(V) |
| Display Color | 16.7M (8-bit) | 16.7M (8-bit) |
INTERFACE
Inputs| RJ45 x1, HDMI x1, DVI x1, VGA x1, USB2.0 x2, Audio In x2| RJ45 x1,
USB2.0 x2, Audio In x1,
SIM Card x1, Card Slot x1,
Power Jack Audio In x1
Outputs| Earphone Out x1| HDMI2.0 x1
AUDIO
Speaker| 2Wx2| 2Wx2
SYSTEM
OS| Linux| Android 11
VIDEO
IP Video Support| 16x (2592×1944) / 8x (2592×1944) / 4x (2592×1944)
CABINET
Color/Material| Metal| Metal
POWER
POE Input DC Range| 36VDC to 57VDC (Complies with IEEE802.3at
IEEE802.3at/4-Pairs)
Consumption| Approx. 27Watt| Approx. 27Watt
POE Power Required| IEEE 802.3bt Type 3 (POE++ 60W)
TEMPERATURE
Operating| 0~50°C| 0~50°C
VESA™
Mount Size| 100x100mm| 100x100mm
Specifications subject to change without any notice
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel.
949-586-3338 / Fax.
949-272-4594 / Email. info@gvision-
usa.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>