dji CHX521-65 Neo Two Way Charging Hub User Guide

dji CHX521-65 Neo Two-Way Charging Hub

Specifications:

• Product Name: Two-Way Charging Hub
• Version : v1.0
• Model Number : YCBZSS00285703
• Languages : EN, CHS, CHT, JP, KR, DE, ES, FI, FR, IT, NL, PL, PT, PT-BR, RU

Product Usage Instructions

Warnings:

1. When using the DJI NEOTM Two-Way Charging Hub (charging hub), use the DJITM 65W Portable Charger or a USB Power Delivery charger for charging DJI Neo Intelligent Flight Batteries.
2. The charging hub is compatible only with the BWX521-1435-7.3 Intelligent Flight Battery. Do not use it with other battery models.
3. Place the charging hub on a flat, stable surface with good ventilation during use. Ensure proper insulation to prevent fire hazards.
4. Avoid touching the metal terminals on the battery ports. Clean them with a dry cloth if there is any buildup.
5. Charge batteries with low power promptly. Store batteries in the charging hub for storage.

Usage:
Charging Intelligent Flight Batteries:

1. Insert batteries into the charging hub’s battery ports until they click into place (Refer to Figure A1).
2. Connect the charging hub to a power outlet using a USB-C charger. The status LEDs show the battery status during charging. Check the Status LED descriptions for blinking patterns.

Status LEDs Descriptions:
Details about the blinking patterns of the status LEDs based on different battery statuses.

Charging Method:
The charging method varies depending on the power of the charger. Refer to the table below for details.

CONTACT DJI SUPPORT

https://www.dji.com/neo/downloads

This content is subject to change without prior notice. DJI and DJI NEO are trademarks of DJI. Copyright © 2024 DJ| All Rights Reserved.

Carefully read this entire document and all safe and lawful practices provided before use.

FEATURES

1. Battery Port
2. Status LEDs
3. Function Button
4. USB-C Port

Warnings

1. When using the DJI NEO™ Two-Way Charging Hub (hereinafter referred to as “charging hub”) to charge DJI Neo Intelligent Flight Batteries, it is recommended to use the DjI™ 65W Portable Charger or a USB Power Delivery charger.
2. The charging hub is only compatible with the BWX521-1435-7.3 Intelligent Flight Battery. DO NOT use the charging hub with other battery models.
3. Place the charging hub on a flat and stable surface with good ventilation when in use. Make sure the device is properly insulated to prevent fire hazards.
4. DO NOT attempt to touch the metal terminals on the battery ports. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
5. Make sure to charge batteries with low battery power in time. It is recommended to store the batteries in the charging hub.

Usage

Charging Intelligent Flight Batteries

1. Insert the batteries into the battery ports of the charging hub until they click into place. (Figure A1)

2. Connect the charging hub to a power outlet using a USB-C charger. The status LEDs indicate the battery status during charging. Refer to the Status LED descriptions for more information about the blinking patterns. The charging method varies depending on the power of the charger. Refer to the table below for details.

   • 10 W ≤ Charger Power <30 W
     Charges in sequence from a high to a low battery level.

   • 30 W ≤ Charger Power <45 W
     Charges two batteries simultaneously: First charge the battery with a lower battery level to the same level as the highest one and then charge the two batteries simultaneously.

   • Charger Power ≥45 W
     Charges three batteries simultaneously: First charge the two batteries with a lower battery level to the same level as the highest one and then charge the batteries simultaneously.

3. The batteries can be stored in the charging hub after charging. Remove a battery from the charging hub for use. (Figure A2)

Using the Charging Hub as a Power Bank

1. Insert the Intelligent Flight Batteries into the charging hub. Connect an external device, such as a smartphone or tablet to the USB-C port of the charging hub, and then press and hold the function button for three seconds. (Figure B)
2. Batteries will be discharged based on the battery level, from the lowest to the highest, and supply power to external devices. To stop charging the external device, disconnect the external device from the charging hub.
   • If the remaining power of a battery is lower than 7%, the battery cannot charge the external device.
   • To switch to charging Intelligent Flight Batteries, reconnect the USB-C cable.

Checking Battery Level
After the batteries are inserted into the charging hub, press the function button once and the status LEDs will display the battery levels. Refer to the section below for the battery level descriptions.

Status LEDs Descriptions
Each battery port has its corresponding status LED array to display the charging status, battery level, and abnormal status of the corresponding battery.

Charging Status

• Status LEDs in an array blink quickly and successively
  The battery in the corresponding battery port is being charged using a USB PD charger.

• Status LEDs in an array blink slowly and successively
  The battery in the corresponding battery port is being charged using a normal charger.

• Status LEDs in an array are solid
  The battery in the corresponding battery port is fully charged.

• All status LEDs blink in sequence
  No battery is inserted.

Battery Level
Each battery port has its corresponding status LED array. The battery level description is the same as the one for the battery level LEDs on the aircraft. Refer to the user manual of the aircraft for more information.

Abnormal Status
The LED status for battery abnormality is the same as that on the aircraft. Refer to the user manual of the aircraft for more information.

Specifications

• Product Model CHX521-65
• Recommended Charger DJI 65W Portable Charger or other USB Power Delivery chargers
• Compatible Battery Model BWX521-1435-7.3
• Operating Temperature 5° to 40° C (41° to 104° F)
• Input (USB-C) 5 V/9 V/12 V/15 V/20 V = Max 3 A
• USB -C Output 5 V= 2A
• Charging Time (using the DJI 65W Portable Charger)
  • Fully charge three batteries: Approx. 60 mins
  • Fully charge one battery: Approx. 42 mins

Compliance Statement

FCC Compliance Statement
Supplier’s Declaration of Conformity

• Product name : DjI Neo Two-way Charging Hub
• Model Number : CHX521-65
• Responsible Party: DJI Research LLC
• Responsible Party Address : 17301 Edwards Road, Cerritos, CA 90703
• Website : www.dji.com

We, DJI Research LLC, being the responsible party, declare that the above- mentioned model was tested to demonstrate compliance with all applicable FCC rules and regulations. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISED Compliance

• CAN ICES-003 (B) / NMB-003(B)
• EU & UK Compliance Notice

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI Neo Two-way Charging Hub) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/30/EU. A copy of the EU Declaration of Conformity is available online at www.dji.com/euro- compliance
EU contact address : DjI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

GB Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI Neo Two-way Charging Hub) is in compliance with the essential requirements and other relevant provisions of Electromagnetic Compatibility Regulations 2016.

A copy of the GB Declaration of Conformity is available online at www.dji.com /euro-compliance

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible for bringing the appliances to these collection points or to similar collection points. With this little personal effort, you contribute to recycling valuable raw materials and the treatment of toxic substances.

FAQ

Q: Can I use a different charger to power the Two-Way Charging Hub?
A: It is recommended to use the DJITM 65W Portable Charger or a USB Power Delivery charger for optimal performance and safety.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>