BLAZE BLZ-FBOWL-TCOVER Fire Pit Bowl Propane Tank Cover Owner’s Manual

BLAZE BLZ-FBOWL-TCOVER Fire Pit Bowl Propane Tank Cover

Specifications

• Product Name: Propane Tank Cover
• Model No.: BLZ-FBOWL-LP-TCOVER /1597
• Rated Heat Output: N/A
• Type of Gas: Propane (LP)
• Gas Supply: 20 lb LP-Gas Cylinder

Product Usage Instructions

Propane (LP) Dangers And Warnings
LP gas is flammable and hazardous if handled improperly. Be aware of the characteristics before using any LP gas product. Ensure to remove the dust cap on the LP gas tank valve outlet before use to prevent propane leakage. Store spare LP gas cylinders away from the appliance and never fill the cylinder beyond 80% full to avoid fire hazards.

Connecting Your Gas Cylinder
Before connection, check for debris in the gas cylinder, regulator valve, and burner ports. Connect the regulator valve firmly and disconnect the cylinder when not in use. Ensure proper ventilation for combustion air flow.

Parts List

1. Tank Cover Lid
2. Tank Cover
3. Feet
4. Tank Seat

Assembly and Use

1. Place the LP tank

   • a. Position the tank seat on the ground and insert a 20lb. propane tank into it.
   • b. Secure the propane tank by tightening the screw on the side of the tank seat.

2. Remove the Lid
   Detach the Lid from the Base of the Tank Cover.

3. Carefully tilt Base
   Insert LP Hose up through the inside of the Base.

FAQ

• Q: Can I use this product indoors?
  A: No, this product is designed for outdoor use only. Using it indoors can lead to carbon monoxide hazards.

• Q: How should I store spare LP gas cylinders?
  A: Store spare cylinders away from the appliance and never fill them beyond 80% full to prevent fire risks.

BLZ-FBOWL-LP-TCOVER Owner’s Manual

Warning : For outdoor use only

Propane Cylinders Sold Separately
Real Flame Customer Service: 1-800-654-1704

Warning

• If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.
• Installation and service must be performed by a qualified installer, service agency or gas supplier.
• Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage.
• Read the installation, operation and maintenance instructions thoroughly before installing or servicing this equipment.
• Save these instructions for future reference. If you are assembling this unit for someone else, give this manual to him or her to read and save for future reference.

DANGER

If you smell gas

1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from the appliance and immediately call your gas supplier or fire department.

WARNING

• Do not store or use gasoline or other flammable vapors and liquids in the  of this or any other appliance.
• An LP-cylinder not connected for use should not be stored in the vicinity of this or any other appliance.

DANGER

• CARBON MONOXIDE HAZARD
• This appliance can produce carbon monoxide which has no odor.
• Using it in an enclosed space can kill you.
• Never use this appliance in an enclosed space such as a camper, tent, car or home.

SPECIFICATIONS

• Product Name
  Propane Tank Cover

• Model No.
  BLZ-FBOWL-LP-TCOVER /1597

• Rated Heat Output
  N/A

• Type of Gas
  Propane (LP)

• Gas Supply
  20 lb LP-Gas Cylinder

Propane (LP) Dangers And Warnings

LP GAS
LP gas is flammable and hazardous if handled improperly. Become aware of the characteristics before using any LP gas product.

Propane Characteristics

• Flammable, explosive under pressure, heavier than air and settles in pools in low areas.
• In its natural state, propane has no odor. For your safety, an odorant has been added.
• Contact with propane could burn your skin.
• Propane is extremely flammable and hazardous if handled improperly.

LP GAS WARNINGS

• Cylinders must be stored outdoors in a well-ventilated area out of reach of children.
• Disconnected cylinders must have valve dust caps installed and must not be stored in a building, garage or any other enclosed area.
• Never use a propane cylinder with a damaged body, valve, collar or footing.
• Dented or rusted propane cylinders may be hazardous and should be checked by your propane gas supplier.
• Be sure to use only one 20 lb (9.1 kg) LP gas cylinder with a Type 1 valve with this appliance as required by the American National Standards Institute (ANSI) and the Canadian Standards Steering Committee.
• Only tanks marked “propane” may be used.
• The LP gas supply tank must be constructed and marked in accordance with the Specifications for LP gas LP gas tanks of the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339, LP gas tanks, Spheres and Tubes for the Transportation of Dangerous Goods; and Commission.
• LP gas tank must be arranged for vapor withdrawal.
• The LP gas tank must have a listed overfilling prevention device (OPD) and a QCCI or
• Type I (CGA810) LP gas tank connection.
• LP gas cylinder must contain a shut-off valve as specified in the Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connection, ANSI/CGA-V-1-1977, CSA B96.
• The LP gas tank should not be dropped or handled roughly.
• Tanks must be stored outdoors out of the reach of children. Do NOT store in a building, garage, or any other enclosed area.
• Never store your LP gas tank where temperatures can reach over 125°F.
• Do not store the LP gas cylinder in direct sunlight or near a source of heat or combustion.
• Never keep a filled LP gas tank in a hot car or car trunk. Heat will cause the gas pressure to increase, which may open the relief valve and allow gas to escape.
• Place dust cap on valve outlet whenever the LP gas tank is not in use. Only install the type of dust cap on the LP gas tank valve outlet that is provided with the LP gas tank valve. Other types of caps or plugs may result in leakage of propane.
  • Do not store a spare LP gas cylinder under or near this appliance.
  • Never fill the LP gas cylinder beyond 80% full.
  • If the information in (a) and (b) is not followed exactly, a fire causing death or serious injury may occur.
• LP gas cylinders should be filled only by a certified LP gas dealer.

Propane (LP) Dangers And Warnings

• Always use the pressure regulator and hose assembly provided with your fireplace to connect to a LP gas cylinder. Never connect to an unregulated LP gas supply. For technical support contact Real Flame at 1-800-654-1704.
• Hand turn the manual gas control valve. Never use tools. If the valve will not turn by hand, do not try to repair it. Call a Certified Gas Technician. The use of force or any self attempted repair may result in a fire or explosion.

Connecting your gas cylinder
Before connection, be sure that there is no debris caught in the head of the gas cylinder, head of the regulator valve or in the head of the burner and burner ports. Connect regulator valve and hand-tighten firmly. Disconnect the propane cylinder from the regulator valve when the fire table is not in use. DO NOT obstruct the flow of combustion air and ventilation air to the burner.

Parts List

1. Tank Cover N/A  1
2. Lid Tank N/A 1
3. Cover Feet 11501-03  1 Set
4. Tank Seat 11501-06A 1

Assembly and Use

1. Place the LP tank.

   • Place the tank seat on the ground and place a 20lb. propane tank into the tank seat (4).
   • Tighten down the screw on the side of the tank seat to secure the propane tank.

2. Remove the Lid (1) from the Base (2) of the Tank Cover

3. Carefully tilt Base (2) and insert LP Hose up through inside of Base (2).

4. Place LP Tank with Tank Seat (4) connected into Base (2) being careful to not damage LP Hose and Regulator.

5. Connecting the LP Gas Tank
   Check to make sure there is no debris in the head of the LP gas tank or in the head of the regulator valve. Make sure you check the burner and burner ports as well.
   Connect gas line to tank by turning knob clockwise. Hand tighten only.
   Disconnecting the LP Gas Tank
   Make sure the valve on the LP gas tank is OFF.
   Disconnect by turning the knob counter clockwise until it is detached from the valve.

6. Replace the Lid (1) on the Base (2).

Care and Cleaning

Cleaning
Your LP tank cover should be cleaned regularly to ensure safe use and extend product life.

WARNING
DO NOT use oven cleaner or abrasive cleaners as they will damage this product.

1. Wipe exterior surfaces with a mild dishwashing soap or baking soda.
2. Rinse clean with water.

Storage
Turn gas OFF at tank connection. Remove tank and store in a cool dry location outdoors and away from children and pets.

Sealing
To maintain the fireplace finish it is recommended to reseal the table surface with a water-based sealer, annually. Resealing will restore the beauty of the finish and further protect the fireplace.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>