BLAUPUNKT BP4000F 40 Inch Full HD TV Instruction Manual

Instruction Manual
40” Full HD TV – BP4000FEnjoy it.

GENERAL SAFETY

Read this manual thoroughly before you start using the TV.
Store this manual, the completed warranty card, your receipt and the product packaging.
The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to.
Please follow all instructions and take notice of all warnings.

The cover (or back) of the unit should
not be removed to prevent risk of electric shock.
This unit must be serviced by a qualified service personnel only.
The lightning flash with symbol within the triangle is intended to warn you of a non-insulated dangerous voltage in the product’s enclosure that could be of sufficient magnitude to generate a risk of electric shock to persons.
The exclamation point within the triangle is intended to warn you to the presence of important operating and maintenance instructions in the documents included with the product.

IMPORTANT INFORMATION
The lightning flash symbol within the triangle is intended to warn you of non-insulated dangerous voltage the product’s enclosure that could be of sufficient magnitude to generate a risk of electric shock to persons.

• Using Cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the Products.
• Ensure the Product is not overhanging the edge of the supporting furniture.
• Do not place the product on a high furniture without securing both the furniture and the product to a stable support.
• Do not place the product on cloth or other conductive materials.
• Warn children of the dangers of climbing on furniture to reach the television or its controls and to call for an adult to assist.

IMPORTANT INFORMATION

• Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard
• Do not tamper or change or modify the product in any way.
• Only use Accessories outlined and recommended by the manufacturer.
• Please do not expose the product to splashing or water contact
• Please do not place any object on top of the product including objects filled with liquids such as vases.
• Danger of explosion if battery is incorrectly placed. Replace with same or equivalent type.

Installation
Please follow instruction when installing this product in accordance with the instruction manual. This product must be positioned in a sufficiently stable location, it can be potentially hazardous due to falling and can cause injury, particularly to children if it positioned incorrectly.

• Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the product rating label

• Do not use a damaged power cord, plug or loose outlet. Doing so may cause an electric shock.

• Do not plug several devices into the same outlet. Doing so may cause the outlet to overheat and start a fire. Make sure the outlet is readily accessible during operation of the equipment.

• Do not bend, twist or kink the power cord excessively.

• Do not allow anything to rest on or roll over the power cord and antenna cable. Doing so may cause a fire or an electric shock.

• Do not run the power cord near heat-producing appliances such as radiators, stoves or irons. The excessive heat could melt the insulation and expose live wires, resulting in fire or electric shock.

• Unplug this TV during lightning storms or when unused for long periods of time. Not doing so may result in fire or electric shock.

• Do not cover the ventilation openings of the product with items such as newspapers, tablecloths, curtains etc or insert objects into the slots available on the products.
  As this could result in the product temperature rising and could cause a fire.

• If you notice any unusual odors or smoke around the unit, immediately disconnect the unit from the outlet and contact the service center. Failure to do so may result in fire or electric shock.

• When not using the unit for long periods of time or when you are moving the unit please ensure to disconnect the power cord from the wall socket.

• Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire.

• The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age, They must be supervised product by a person responsible for their safety.

• Batteries from the remote control must be only removed by an adult, the adult must ensure to keep them out of reach of infants and children. Seek medical attention immediately if a child has swallowed a battery.

• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

• To maintain the product do not use any chemical or cleaning agent or wet cloth, please only ensure to utilize a dry cloth to wipe it down from marks or dust and only after unplugging the product from the power socket.

• Please ensure to contact our call center for any repair or service required for the products.

• Make sure to always carry TV from the sides, always be sure to have assistance by another person. Do not carry the TV from the middle.

WARNING!
It is STRONGLY RECOMMENDED that you ANCHOR this product.
Toppling furniture and TV’s can cause serious injury or death.
TO HELP AVOID ANY SERIOUS OR FATAL INJURY, WE STRONGLY RECOMMEND THAT THIS PRODUCT BE PERMANENTLY FIXED TO THE WALL OR OTHER SUITABLE SURFACE. FIXING DEVICES ARE NOT INCLUDED SINCE DIFFERENT SURFACE MATERIALS REQUIRE DIFFERENT ATTACHMENTS. PLEASE SEEK PROFESSIONAL ADVICE IF YOU ARE IN DOUBT WHAT FIXING DEVICE TO USE.
If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
• Not standing the television on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.

Please make sure upon positioning this product, the place is:

• Not wet or damp and Well ventilated
• Away from direct sunlight or heaters.
• Away from splashes or food.
• Protected from excessive dust or grease.
• Do not install this equipment in a confined space such as a bookcase or similar unit.
• Do not install the TV set near heat sources such as radiators, stoves or other audio visual equipment that produce heat.
• Do not place containers with liquids, if liquid falls inside the products it may result in short-circuit, fire or electric shock.
• Do not place small metallic objects on top of the unit. Metal object falls inside the product it may result in short-circuit, fire or electric shock.
• Do not use or store flammable or combustible materials near the unit. Doing so may result in fire or explosion. Do not place any naked flame sources, such as lit candles, cigarettes or incense sticks on top of the TV set.
• The antenna must be installed away from high-voltage power line,
• Please contact an antenna professional installer to install the antenna to avoid incorrect installation which could result in fire, electric shock or serious injury.
• Install the unit at a reasonable distance from the wall to ensure sufficient ventilation.
• If mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

INSTALLATION

Install the stand as described below, or if you want to mount it to a wall, please contact a professional installer.
Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task.
Attaching the stand
Step 1
Place a soft cushioned material on top of a flat surface to prevent damaging the screen panel. Then place the TV screen flat on top, with the screen side facing down, as illustrated on the right.
Step 2
Align the stand leg to the installation point, as illustrated below
Step 3
Tighten the screws (supplied) with a screwdriver to affix the stand to the panel, as illustrated on the right.

CAUTION!
Do not apply excessive force as this may damage the screw holes.
Wall-Mounting Instructions
Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task.

• We recommend you use a professional installer as we assume no liability for any eventual damage to the product or injury to yourself if you mount the TV on your own.

BACK OF TV
VESA PATTERN: 200 (w) x 200 (h) mm

NOTE: If you are wall-mounting the TV, this should be done by a qualified installer.

CONTROLS AND CONNECTIONS

1. LED display screen
2. Remote control sensor / Power indicator- In standby mode the indicator light will display red color; when switching on the unit the indicator light will display blue color.
3. Stand holder
4. STANDBY button- To turn ON/OFF the TV.
5. VOL +/- button- To increase/decrease the volume level or move left/right.
6. CH +/- button- To select next/previous channel or move up/down.
7. MENU button- To enter menu setting page.
8. SOURCE button- To select the input source.

Back View

1. POWER INPUT
2. HEADPHONE INPUT
3. HDMI 1 (ARC) / HDMI 2
4. VGA
5. PC AUDIO
6. MINI YPBPR INPUT
7. MINI AV INPUT
8. USB 1 / 2 INPUT
9. OPTICAL OUTPUT
10. RF (ANTENNA)

USB connection
Insert a USB storage device into the USB port to record, playback of video/music/photo

REMOTE CONTROL

1. STANDBY
   Set the unit in standby mode; press it again to switch it on.

2. TV/RADIO
   Switch the unit between TV and Radio.

3. RED / GREEN / YELLOW / BLUE button
   The colored buttons are used in submenus.

4. SUBTITLE
   Enable/disable subtitles.

5. TEXT
   Display the available Teletext.

6. TVG
   Display electronic program guide.

7. HOLD
   Hold the Teletext.

8. AUDIO
   Switch the available sound-track.

9. Start/pause playing.

10. SUBPAGE
    Enter Teletext sub-page.

Move fast forward.

11. SIZE
    Switch Teletext size.

Move fast backward.

12. (DTV)
    Start RECORDING when watching available digital programs.

13. Stop playing.

14. Play the next file.
    INDEX
    Display the record list or Teletext index.

15. Play the previous file.
    FAV
    Display the favorite channels list.

16. MENU Call out the main menu or return to previous menu.

17. SOURCE
    Select desired input source.

18. OK
    Confirm selection.

19. ▲/▼/◀/▶
    Navigation buttons

20. EXIT
    Exit the menu page.

21. ASPECT
    Press it repeatedly to select desired screen size.

22. MUTE
    Mute the sound.

23. VOL +/-
    Increase/decrease the volume level.

24. CH +/-
    Play the next/previous program.

25. DISPLAY
    Display the available program information.

26. Number buttons (0-9)
    Input the number information, such as channel number and so on.

27. -/–
    Switch the digit when watching TV programs.

28. Return to previous channel.

Using the Remote Control

• Battery should normally last for about one year.
• Do not mix old and new batteries in the remote
• Do not use different types of battery
• If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident.
• Keep batteries away from children and pets.
• Never throw batteries into a fire.
• Do not drop, or impact the remote control as it void warranty immediately.
• The remote control operate at a range of 5 to 6M effectively
• Do not expose the remote control sensor to a bright light.

Getting Started

TURN THE POWER ON OR OFF:

• Plug the power cord into a suitable power point,
• Turn on the power switch.
• Press the STANDBY/ON button
• When you switch on the TV for the first time, the First Time Setup menu will be displayed on the screen, as per the image below.
• Press the navigation arrows to highlight the language you want to select and press OK.
• Now you will go to the Tune Type Page, change it to only DTV. (ATV does not work in Australia anymore).

Basic Operations

Selecting an Input Source

• Press the SOURCE button on the remote control, to display the input source list.
• Press ▲/▼ the buttons to select the input source, and then press OK to confirm.
• You can access connected USB drives by selecting USB.
• NOTE: The first time you use this TV, make sure to go through the first time installation and auto-search for all the DTV channels.

Media

MEDIA PLAYBACK

• First insert a USB Device into the TV
• Press “USB” on SOURCE Menu.
• Use the directional arrow keys to Select FILE TYPE and then through folders within your USB device to access your file.
• Press the EXIT button to return to previous page

Menus

PICTURE SETTINGS
To access Picture settings, press the MENU button and go to picture.

SOUND SETTINGS

Sound Mode
– Press the UP/DOWN/LEFT/RIGHT navigation buttons to select an option.
Sound Mode: available options: Standard, Music, Movie, Sports, Personal.
Treble / Bass: adjustable value: 0-100.
NOTE: Treble and Bass are adjustable only when Sound Mode is “Personal”.
Balance
This item is used to adjust the audio output between left and right speaker from -50 to 50.
Auto Volume
This item is used to set Auto Volume ON or OFF.
Surround Sound
This item is used to select desired mode of Surround sound.
SPDIF Mode
Available options: Auto, PCM, Off.
AD Switch
This item is used to set AD Switch ON or OFF. For Visually Impaired users, this function enables a user to know a certain scene or action through the narration, instead of seeing it.
NOTE: AD Switch function works only when you are viewing programs that contain related narration information.
CHANNEL
To access CHANNEL settings, press the MENU button and go to CHANNEL.

Auto Tuning

• Press the OK or RIGHT navigation button.
• Use the navigation buttons to set the Country, Tune Type and LCN.
• Then press OK to start program tuning.

ATV Manual Tuning

• Press the OK or RIGHT navigation button.

Current CH: select current channel.
Color System: select available color system.
Sound System: select available sound system.
Fine Tune: fine tune the frequency.
AFC: turn on/off Automatic Frequency Control.
Search: search available programs.

DTV Manual Tuning

• Press the OK or RIGHT navigation button.
• Use the LEFT/RIGHT navigation button to select the channel. Then press the OK button to start searching.

Programme Edit

• Press the OK or RIGHT navigation button.
• Press the UP/DOWN navigation button to highlight a desired channel.
• Press the RED button on the remote control to delete a highlighted channel.
• Press the YELLOW button on the remote control to enter MOVE mode. Then use the UP/DOWN navigation button to select a preferred position and press the YELLOW button again to move it.
• Press the BLUE button on the remote control to skip a highlighted channel.
• Press the FAV button to set the current channel as a favorite channel, and press the FAV button again to set it as a normal channel.

Schedule List

• Press the UP or DOWN navigation button to select this item, and press the OK or RIGHT button to enter it. If any programs were scheduled through the Add menu (press the YELLOW button on the remote control). The below menu will appear.

LOCK MENU
To access LOCK settings, press the MENU button and go to Lock.
Default factory password is “0000”, then you can set your own password to lock the TV.
Master Password is: “4711”

Lock
This item is used to turn on/off Lock System.

Channel Lock

• Press OK or RIGHT navigation button to enter it.
• Press UP/DOWN navigation button to select the channel which you want to lock.
• Press GREEN button repeatedly to lock/unlock the highlighted channel.

Parental Guidance

This item is used to select desired program rating.
Available options: NO Block, Block All, Block G and above, Block PG and above, Block M and above, Block MA and above, Block AV and above, Block R and above.

Key Lock
This item is used to lock/unlock TV buttons.
Available options: On, Off.

TIME SETTINGS
To access TIME settings, press the MENU button and go to TIME.

Clock
It displays the current system time when an available channel was saved.
Time Zone
This item is used to select a desired time zone.
Off Time
Off Time: available options: Off / Once / Every Day / Mon~Fri / Mon~Sat / Sat~Sun / Sun.
Hour / Minute: use navigation buttons to adjust the Hour / Minute when the Off Time is not
On Time
On Time: available options: Off / Once / Every Day / Mon~Fri / Mon~Sat / Sat~Sun / Sun.
Hour / Minute / Source / Channel / Volume: use navigation buttons to adjust these items when the Off Time is not “Off”.
Sleep Timer
This item is used to set the automatic sleep time.
Available options: Off, 10min, 20min, 30min, GOmin, YOmin, 120min, 180min, 240min
Auto Standby
This item is used to select a desired Auto Sleep (standby) duration when no operations are done through the remote control. Available options: Off, 3/4/5 hours.
OSD Timer
This item is used to select a desired OSD menu duration.
Available options: Off, §/10/15/20/25/30/35 seconds.

SETUUP SETTINGS
To access Setup settings, press the MENU button and go to SETUP.

Language
This item is used to select the default on-screen display language.
TT Language
This item is used to select the default teletext language.

Audio Language

• Press the RIGHT navigation button.
• Then you can select the desired primary audio language and secondary audio language.

Subtitle Language

• Press the RIGHT navigation button.
• Then you can select the preferred primary subtitle language and secondary subtitle language.

Hearing Impaired
This item is used to turn on/off the Hearing Impaired function. For Hearing Impaired users, this function providescaptions to supplement the audio.
NOTE: Hearing Impaired function works only when you are viewing programs that contain related caption information.
Aspect Ratio
This item is used to adjust the video size.
Available options: Auto, 4:3, 16:9, Zoom1, Zoom2.
NOTE: The available video size may be different for different input sources.

Electronic Program Guide (EPG)

EPG Guide (DTV Mode Only)

• Press the TVG button on the remote control to display the above interface.
• Before viewing EPG information, you have to ‘activate’ each channel for which you want to view program information. To do this, press the▲/▼ buttons to select a channel in the left column, then press OK to confirm.
• Press the EPG button to display the EPG interface (above).
• Usethe ▲/▼ buttons to select a channel in the left column, then press the OK button.
• Press the ◀/▶ buttons to switch between the channels list on the left column and the programs list on the right side of the screen
• Press the ▲/▼ buttons to select different channel/program.
• Press the RED button or RECORD button to schedule a recording
• Press the GREEN button to schedule a reminder
• Press the YELLOW button to display the TV Guide for the previous day.
• Press the BLUE button to display the TV Guide for the next day.
• Press EXIT to exit the EPG menu.

Recording

• Insert your USB memory device into the USB slot first.
• When watching digital programs, press the REC button on the remote control and the tool bar below will appear on the screen:
• Press the LEFT or RIGHT navigation button to select the desired option. Press the OK button to confirm the selection.
• If the tool bar disappears, press the EXIT button on the remote control to display it again.
• Press the button to call out a reminder message. Use the LEFT/RIGHT navigation button to exit or continue recording.

TIMESHIFT (FOR DTV MODE ONLY)

• Insert your USB memory device into the USB slot first.
• When watching digital programs, press button to enable the TIMESHIFT function.
• Press the LEFT or RIGHT navigation button to select a desired option. Press the OK button to confirm selection.
• If the tool bar disappears, press the EXIT button on the remote control to display it again.
• Press the button to call out a reminder message. Use the LEFT/RIGHT navigation button to exit or continue time-shifting.

FAQS

GENERAL PROBLEMS WITH TV SET

• Adjust the antenna
• Move TV away from any products that may cause interference.
• Autotune the unit again
• Go to another channel
No sound or distorted sound| • Make sure everything is connected correctly
• Check if input settings for TV is correct
• Audio settings are properly set
• Make sure volume is not muted.
• If earphones are connected, unplug them.
• Adjust the volume
No operation can be performed with the remote control| • Check the batteries are inserted correctly
• Replace batteries if they have been used for awhile
• Make sure to point remote control at the TV sensor and try again
• Make sure you are not further then 6m away from TV.
• Remote any obstacles that may be in the way of direct line
of sight from remote control to the TV sensor.

SPECIFICATIONS

DAT / MP4
Music: MP3 / WMA / AAC
Photo: JPG / JPEG / BMP / PNG
Power Source| 100-240V ~ 50/60Hz
Power Consumption| 60W
USB| 5V — max. 500mA
Dimensions| With stand: 907 (w) × 207 × 568 (h) mm
Without stand: 907 (w) × 81 × 519 (h) mm
Weight| Net: 5.29 kg
Gross: 7.19 kg

CUSTOMER HELPLINE:
info@ayonz.com
DISTRIBUTED BY:
Ayonz Pty Ltd

Documents / Resources

| BLAUPUNKT BP4000F 40 Inch Full HD TV [pdf] Instruction Manual
BP4000F 40 Inch Full HD TV, BP4000F, 40 Inch Full HD TV, Full HD TV, TV
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>