Goldair GCDF230 30cm Drum Desk Fan – Matte White & Wood Instruction Manual

: June 3, 2024
: GOLDAIR

Table of Contents

General Care and Safety Guide
Components
Assembly
Operating your Fan
Cleaning
One Year Warranty
Documents / Resources

Goldair GCDF230 30cm Drum Desk Fan – Matte White & Wood Instruction Manual

General Care and Safety Guide

Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Ensure that the fan is switched off from the supply mains before removing the guard.
Use only the voltage specified on the rating plate of the appliance.
Keep all objects at least 1 Metre from the front, sides and rear of the appliance
This appliance is intended for household use only and not for commercial or industrial use.
Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
Always unplug appliance when not in use.
When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Goldair Customer Services Team.
If your appliance does not work, or is not working properly, contact the place of purchase. Repair work on the appliance by unqualified persons can cause serious risk to the user.
Ensure hands are dry before handling the plug or the main unit.
Carry out regular checks of the supply cord to ensure no damage is evident.
Ensure that the cord is fully extended (not coiled) while in use.
Avoid contact with the moving parts. Keep hands, hair, clothing, away from blade of the fan during operation to reduce the risk of injury to person and/or damage to the unit.
Switch off and use handles provided when moving.
It is recommended that this fan is plugged directly into the wall socket.
A correctly specified, undamaged extension cord may be used with this fan provided it is used in a safe manner.
Never place appliance close to radiant heat source.
Never operate in areas where petrol, paint or other flammable liquids are used or stored.
Never use the appliance to dry clothes.
Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
Never connect the appliance to mains supply until completely assembled and adjusted.
Never remove plug from power socket until the appliance has been switched off.
Never remove plug from power socket by pulling cord – always grip plug.
Never twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
Never use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool or other liquids. The appliance must not be immersed in any liquids.
Due to the risk of injury, never use this appliance for any purpose other than its intend d use. This appliance is intended for use in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses, by clients in hotels, motels, bed and breakfast type environments and other residential type environments
Never use this appliance outdoors.
Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Have the appliance checked and repaired by a qualified electrician if repair is necessary.
Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.

Components

Oscillating knob
On / Off / Speed Control
Tilt range knob
Tilt adjustment bolt
Post top
Post
Base washer
Base thumb screw
Fan head assembly
Tilt range screw
Tilt adjustment knob
Base

Assembly

Your fan has been boxed unassembled to minimise packaging waste. Each part is designed to fit together and be disassembled easily for cleaning and storage.
Start with the base and post as follows.
Remove the tilt adjustment knob byunscrewing the knob and slide the tilt adjustment bolt out. Remove the base thumb screw and the base washer by unscrewing as shown.
Fit the post into the recess in the top of the base and whilst holding it in place, turn over to access underneath. Place the washer over the hole and then insert the base thumb screw. Tighten securely, then turn the assembly the right way up and sit on a flat surface.
Using a Philips screwdriver, remove the small tilt range screw from the coupling bracket on the fan neck and then unscrew the tilt range knob.

NOTE: It is important that the post and fan head are in the correct orientation when assembled.

The top section of the post has a small horizontal open slot on one side and a small horizontal depression on the other side as shown.

The side with the open slot is for the small tilt range screw. The side with the small depression is for the tilt range knob to tighten up onto.

Take the head assembly and position the mating section over the post end as shown.
Slide the tilt adjustment bolt all the way through as shown.
Screw in the tilt range knob to loosely secure.
. Using a Philips head screwdriver, screw in the small tilt range screw and tighten.
Screw on the tilt adjustment knob and tighten.

Operating your Fan

Always choose a safe location for the Fan, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. This appliance requires no installation, it should be used solely as a portable appliance.

Operating your Fan

WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.

Place the fan on a dry, level and sturdy surface.

Ensure the fan speed control is on the OFF position before plugging the power cord into the socket.

Fan control switch

The control switch positions are:

0 = OFF
1 = Low Speed
2 = Medium Speed
3 = High Speed

To operate the fan, turn speed control dial clockwise until desired wind speed is achieved.

To adjust the tilt angle, loosen both the larger tilt adjustment knob and the smaller tilt range knob, then tilt the head to the desired angle and tighten both knobs.

To activate the oscillation function, push down the oscillation pin on the top of the motor. The fan will then oscillate until the pin is pulled back up.

IMPORTANT! NEVER COVER THIS APPLIANCE!

Cleaning

The fan requires regular cleaning to ensure trouble free operation.
Ensure that the fan is switched off from the supply mains before removing the guard.
Unplug the fan from the mains supply before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Ensure the fan is dry before plugging back into the mains supply.
Do not attempt to dismantle the fan. There are no user serviceable parts. For service or repair, contact an authorised electrical service technician.

PROOF OF PURCHASE

To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).

SUPPORT AND TECHNICAL ADVICE

Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz

Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
sales@cdbgoldair.com.au

One Year Warranty

Thank you for purchasing this Goldair product. Your product is warranted against faults and manufacture when used in normal domestic use for a period of one year. In non-domestic use Goldair limits the voluntary warranty to three months.

Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.

This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone other than a qualified electrical service technician.

PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.

The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in relation to the goods or services to which this warranty relates.

In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).

Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland , 0745
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz

Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au

Goldair One Year Warranty (IMPORTANT: Please complete and retain this warranty card).

Name ____
Address ____
Place Of Purchase ____
Date of Purchase ____
Name Of Product ____
Model Number ____

Attach a copy of the purchase receipt to this warranty card

Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.

Documents / Resources

| Goldair GCDF230 30cm Drum Desk Fan - Matte White & Wood [pdf] Instruction Manual
GCDF230 30cm Drum Desk Fan - Matte White Wood, GCDF230, 30cm Drum Desk Fan - Matte White Wood, Drum Desk Fan - Matte White Wood, Matte White Wood, Wood
---|---