PATPET PD 258-V Vibration Anti Bark Collar User Manual

: September 16, 2024
: PATPET

Table of Contents

PD 258-V Vibration Anti Bark Collar
Product Information
Specifications:
Product Usage Instructions:
Turn On/Off:
Sensitivity Adjusting:
Vibration Test:
Training Instructions:
Automatic Intelligence Mode:
Charging Information:
Attention:
Safety Notes:
Reminders:
- FAQ
Q: Can the collar be used on all dog breeds?
Q: How long does it take to see results from using the

PD 258-V Vibration Anti Bark Collar

“`html

Product Information

Specifications:

Model Number: PD 258-V
Safe product with cycle charging and energy-saving
functions
Suitable for popular dog breeds
Adjustable sensitivity with 5 levels
Automatic Intelligence Mode after 30 seconds of no barking
Charging: Input: 100-240V~50/60HZ, Output: 5V 1000mA (or
300mA/500mA)

Product Usage Instructions:

Turn On/Off:

Start the collar by pressing the switch, and shut it down by
pressing for one second.

Sensitivity Adjusting:

You can adjust sensitivity based on the loudness of barking.
Press +/- to adjust with 5 levels. Higher sensitivity means easier
activation.

Vibration Test:

The collar will vibrate if you blow into the sense hole or
imitate loud barking.

Training Instructions:

The collar vibrates when the dog barks.
If barking continues, the collar vibrates longer after each
bark.
After training, the dog learns the vibration is due to
barking.
Results may take time to show.

Automatic Intelligence Mode:

If no barking for 30 seconds, collar resets.
After 7 cycles, collar stops for 30 seconds before
resetting.

Charging Information:

Red light twinkles when charging, stays solid when full. Collar
auto shuts off when battery low.

Attention:

Use USB charger with specific parameters. Do not tie leash to
collar. Ensure proper fit for effective vibration.

Safety Notes:

Avoid dog biting collar. Consult vet if swallowed.
For dogs only; keep away from children.

Reminders:

Install nylon collar as shown. Trim long receiver collar if
needed.

FAQ

Q: Can the collar be used on all dog breeds?

A: The collar is suitable for most popular dog breeds, but
individual results may vary.

Q: How long does it take to see results from using the

anti-bark collar?

A: Results may vary, but it generally requires a certain period
of consistent training to see good results.

“`

Vibration Anti-Bark Collar
User Manual
Model Number: PD 258-V

Main Features:

PD258-V is a very safe product. 2) It has cycle charging, energy-saving functions. 3) It won’t be disturbed by any other noisy. 4) It’s suitable for the most popular dog breeds.
Turn On/Off:
Start it by just pressing the switch, and shut it down by pressing one second.
Sensitivity Adjusting:
1)You can adjust the correct sensitivity according to the loudness of dogs’ barking. 2)It’s easy to adjust the sensitivity with 5 levels, the initial setting is level 3. Press “+/- “to adjust the sensitivity with a “bleep” , the higher sensitivity, the easier to activate the collar to work.

Sense hole
Vibration Test:
The anti-bark collar will start vibration if you blow directly to the sense hole in the middle or imitate barking loudly.
Training Instructions:
1)As soon as the dog barks, anti-bark collar will start vibration to warn the dog to stop. 2)If the dog continues to bark, the collar will continuously vibrate for longer time after each bark till the dog stop barking. 3)After training, the dog will learn the vibration is caused by the bark. 4)It does need certain period of time to see the good result of this anti-bark collar.
Automatic Intelligence Mode:
1)After the dog stops barking for 30 seconds, anti-bark collar will reset to initial standby model, no matter how many times it works.

2)After the collar works for 7 times, the signal lamp will twinkle fast, and then the collar will stop working for 30 seconds before resetting to initial standby model. The vibration technology is not only humane, but also very safe and effective.
Charging Information:
1)The product is with cycle charging function, the red light will twinkle when charging, and stay red without twinkle when charging full. 2 ) When battery is too low, the collar will shut down automatically, please charge in time.
Attention:
Please use USB charger with follow parameters (The product is also compatible with mobile chargers or computer USB interface, please double check the parameters before charging) Input: 100-240V~50/60HZ Output: 5V 1000mA(or 300mA/500mA)
Collar:
1)Please cut it if the stripe is too long. 2)Please don’t tie the leash to the stripe. 3)Please put the collar below the dog neck with a finger space, if too loose, the vibration effect will be severely reduced.

Safety Notes:
1)Please avoid the dog biting of the collar, which is made by indigestible plastic and electronic components. If dog swallows any parts accidentally , please consult the local vet immediately. 2)The product is for dogs only, please put it away from kids.
Reminders:
1)Please keep the product away from water. 2)Very few dogs will still bark at the beginning of wearing the collar, and according to our years’ experience, this behavior is normal and it only needs some time of training. 3)Usually the dog will reduce barking evidently after the first few days of wearing the collar, but the training isn’t finished, and smart dogs will still attempt to bark. So we need to continue the training to keep the good result. 4)Although the anti-bark collar is designed with the latest technology of differentiating the dog’s barking from other environmental noises, it might be seldom activated by dog’s excessive scratching or outer fierce crash. Then the pet might be suffering from fleas or ear mites, please consult a local vet immediately. 5)If any other questions, you are welcome to contact us or our distributors.

Please install nylon collar in accordance with the illustrated figure.

Too long Receiver Collar can be trimmed, or be handled with other methods.

The device has been approved for use in EU countries and is therefore provided with the CE mark. All necessary documentation is available on the website: www .electric-collars.com Changes to technical parameters, properties and printing errors reserved.
Service center and distribution Reedog, sro Sedmidomky 459/8 101 00 Prague 10 Phone: +1 646 980 4569 Email: info@electric-collars.eu