PATPET P11951 772V Anti Barking Collars User Manual

: June 4, 2024
: PATPET

Table of Contents

PATPET P11951 772V No Bark Collar User Manual
Documents / Resources
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PATPET P11951 772V No Bark Collar User Manual

Please read the manual carefully before using and keep the manual properly

Thank you very much for choosing our bark collar.
Our bark collar is backed by a 100% quality guarantee!
If you are not satisfied for any reason, please contact our customer service immediately we will help you within 24 hours.

Important Safety Information

Not suitable for aggressive dogs

Do not attempt to use this product to correct the behavior of dogs that are aggressive to people or other animals. Aggressive dogs may associate training collar stimulation with other control stimulus and become more aggressive Aggressive behavior should be corrected by a dog training specialist. If you are not sure whether this product apply to your dog, you can consult veterinarian or certified trainer. And the no bark collar must only be used on healthy dogs. If your dog has health problems, please take him to the veterinarian first.

Main Features

Power button — 0-7 grade, 7 grade means fully charged
Vibration button — 0-7 grade, 7 grade is the highest vibration and then decreases in turn, until 0 grade will close the vibration mode
Beep button — 0-7 grade, 7 grade is the highest beep and then decreases in turn, until 0 grade will close the beep mode.
Sensitivity button — adjustable 1-7 grade is suitable for huge to mini breed.
Please note: Usually the digital will not show, and when the collar is activated will show the grade of power not the grade of mode
The bark collar fits all dogs from 15-120 LBS.
Product weight: 70g
Rainproof and Rechargeable
The perimeter range of the dog collar: 7.4-23.5in

Packing List

1 x Receiver (includes 1 X Nylon Collar)
1 x USB Charging Cable
1 x User Manual
2 x conductive silicone

ON-OFF

Press the Power Button once to turn on, press the Power Button for 3 seconds again to turn off

Using Method

Once you receive the collar please test it firstly. (testing way as below)
After testing please configure the suitable mode for your dogs follow the instructions and your actual situation! (instructed picture as below)

Friendly Reminder

Keeping one finger distance between the neck and the collar to avoid being triggered by the shaking/moving/running etc.
Do not wear longer than 12 hours per day. If it is possible, reposition the collar every 1 to 2 hours
Take the barking collar off before swimming, it is rainproof, not waterproof.
Please take off your iron collar, before you put the bark collar on.
Clean the contacted area between the collar and the neck weekly with a damp cloth
Examine the contacted area between the collar and the neck daily to avoid rash or sore

Product Working Principle

This product uses the vibration sensor for sensitivity distinction, when the dog barks, it will trigger the sensors thus triggering the product. The collar will beep then the vibration (depending the setting).

Auto-Protection Mode

If the collar keep activates for 7 times in one minute, it will enter auto- protection mode, the display will flash “E”, one minute later the product will enter the work mode.
When in automatic protection mode, press any button will make the product re- enter the work mode

Chargeable Collar

Gently press the power button, you can know how much the power it is.
1 hour of charge time gives you 14-20 days of using,
When charging the product, the digital tube will display the power and continue to flash.
When the product is fully charged, the digital tube will display “7”
Rechargeable Battery (280mAh)
Adapter is not include
Adapter Current is less than 1A

Testing

Turn on the power
Set the sensitivity to 5-7 grade
Please send a short voice like “wow” (as short as possible) to sensors. Since the frequency of human voice is different from that of dogs, please test more time
The device will beep first, followed with a vibration.The device is now ready to use.

Frequently Asked Questions

Which part of the dog’s body can put the receiver?

– Below the throat.

Why the product just bought back but can not work?

– First confirm that the product is powered, then turn on the power and adjust the product sensitivity to 5-7 grade

Why product does not work when the dog barking?

– Please to ensure that the products close to the dog’s neck, and increase the sensitivity.

Will the collar vibrate if another dog barks?

– You never worried about this case, our collar build-in smart barking detection chip, only your dog’s barking can trigger the collar while other dogs’ barking nearby can’t trigger it.

If you have any questions about our bark collar, please contact our customer service immediately.

Attention:

Q: Which part of the dog’s body can put the receiver?
A: Below the throat.

Keeping one finger distance between the neck and the collar to avoid being triggered by the shaking/moving/ running etc.

Please take off your iron collar, before you put the bark collar on.

Tips

You should choose these functions according to the size of your dogs.
Refer to the Dog Size Reference Chart for a detailed guideline on which sensitivity grade is best suited for your dog.
You can place the collar on your dogs without powering the device on to allow them to adapt to the collar.
Tips for how to choose optimal sensitivity for your dogs:

Tips Table 1

You can adjust the sensitivity from the highest sensitivity gear 7. If your dog is accustomed to the sensitivity levels, you can lower the sensitivity grade.
You are recommended to use sound function first, then choosing the vibration function according to how your dog responds to the collar.
Tips for how to choose optimal vibration function or beep function for your dogs.

Tips Table 2