SEALEY SSP19CO Deluxe Clip On Ear Defenders User Manual
- September 15, 2024
- SEALEY
Table of Contents
SEALEY SSP19CO Deluxe Clip On Ear Defenders
Specifications
- Model: SSP19CO
- Certification: BS EN 352-3:2002
- Hearing Protection Level: SNR of 30dB
- Weight: 295g
Product Usage Instructions
Safety
It is crucial to follow these safety guidelines:
- Always wear the ear defenders before exposure to noise and during the entire noise exposure.
- Regularly check for serviceability and inspect for any deterioration.
- Ensure that the ear defenders fit properly to provide adequate protection.
Introduction
The ear defenders are lightweight, rugged, and fully adjustable, suitable
for various working environments. Here are the key features:
- Certified to BS EN 352-3:2002 standard
- Fully adjustable ear cups for a precise seal
- Suitable for use on all Worksafe helmets or helmets with a 30mm fixing point
Attenuation Values
The ear defenders offer high noise reduction levels with an SNR of 30dB.
Use
- Attach ear defenders to each side of the hard hat by sliding them into the slots.
- Adjust the ear cups to ensure a proper fit against the head.
- Confirm firm attachment by lifting the arms up and down.
- To remove, push the clip outwards from inside the helmet and pull it off.
Cleaning
Proper cleaning is essential for maintenance:
- Clean with warm soapy water; avoid organic solvents or alcohol.
- Disinfect every 3 months using a suitable plastic-safe product.
Storage
When not in use, store the ear defenders in a clean, dry poly-bag to
prevent damage or contamination.
Environment Protection
Ensure eco-friendly disposal:
- Recycle all unwanted materials instead of disposing of them as waste.
- Dispose of unserviceable products and fluids according to local regulations.
FAQ
-
Q: How often should I disinfect the ear defenders?
A: It is recommended to disinfect the ear defenders every 3 months based on usage. -
Q: Can the ear defenders be used with any helmet?
A: The ear defenders are suitable for use with all Worksafe helmets or any helmet with a 30mm fixing point.
DELUXE CLIP-ON EAR DEFENDERS MODEL NO: SSP19CO
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instruction manual
SAFETY
WARNING! Put the ear defenders on before exposing yourself to noise and wear them during the whole noise exposure. Be warned that failure to adhere to these recommendations will cause the protection afforded by the product to be severely impaired.
- Regularly check for serviceability.
- Ear defenders may be adversely affected by certain chemical substances. Further information should be sought from manufacturer of the chemicals that they may come into contact with.
- Ear defenders and in particular the cushions, may deteriorate with use and should be examined at frequent intervals for cracking and deterioration. Replace after 2 to 3 years of normal use or sooner if there are any signs of deterioration.
- DO NOT replace any parts, there are no replacement parts.
- The fitting of hygiene covers to the cushions may affect the acoustic performance of the ear defenders.
- Ear protection will be reduced if the defenders are not well fitted and not regularly checked.
- If the recommendations given in the instructions are not followed, the protection provided by the ear defenders will be significantly reduced.
WARNING! These ear-defenders are of universal size range. Ear-defenders complying with EN 352-1 are of universal size range. Universal ear-defenders include small, medium and large size and are thus designed to fit the majority of wearers including for those whom medium size does not fit.
INTRODUCTION
Lightweight, yet rugged construction, certified to BS EN 352-3:2002 standard. Hearing protection level in excess of the standard, with an SNR of 30dB. Fully adjustable ear cups to ensure a precise seal against the head. Suitable for use on all Worksafe helmets or any helmet with a 30mm fixing point. Fully approved to protect against high noise levels in most working environments. Nett weight: 295g
ATTENUATION VALUES
USE
- A. Attach ear defenders to each side of the hard hat by sliding them into the slots.
- B. Slide each ear defender housing down into the slots on each side of the helmet.
- C. Place hard hat on head and adjust the ear defenders by sliding cups up and down.
- D. Ensure the ear defenders are firmly attached by lifting the arms up and down.
- E. To remove, push clip outwards from inside the helmet and pull from the helmet.
CLEANING
Clean with warm soapy water, DO NOT use organic solvents or alcohol for cleaning.
DISINFECTION
Disinfect every 3 months according to use.
Any part of the ear defender which is in contact with the wearer, shall be
disinfected with a product suitable for use on plastics,
(materials used: Polycarbonate/Polyoxymethylene headband, Acrylonitrile
Butadiene Styrene/High Impact Polystyrene cup and soft Polyvinyl Chloride
leather) and not known to be harmful to the wearer.
STORAGE
When not in use store in a clean and dry poly-bag.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important : No Liability is accepted for incorrect use of this product.
Warranty
Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
SSP19CO Issue:1 08/07/20
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>