LABCONCO 160404121 Protector Class Mate Laboratory Hood Owner’s Manual

: September 13, 2024
: LABCONCO

Table of Contents

LABCONCO 160404121 Protector Class Mate Laboratory Hood
Overview
Specifications
Description
Required Accessories (Not Included)
Compliance
For Product Assistance
SCANNER
MORE INFORMATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LABCONCO 160404121 Protector Class Mate Laboratory Hood

Overview

The patented Protector ClassMate Laboratory Hood is designed to meet the needs of instructional laboratories. Clear back and sides and taller front viewing windows provide enhanced visibility for conducting chemistry demonstrations or observing students using the hood. The clear back also does not obstruct visibility when hoods are placed back-to-back in an island configuration.
Fully featured with baffle and airfoil, this high-performance by-pass hood maintains safe airflow while conserving energy. The Protector ClassMate Hood is a benchtop design and is offered in 4′, 5′, and 6′ widths. Models with combination style sashes are also available.

Specifications

Weight: 400.0 lbs
Weight metric: 181.4 kg
Dimensions: 48.0″ w x 32.7″ d x 59.0″ h
Dimensions metric: 121.9 x 81.9 x 149.9 cm
Electrical: 208-230V, 50/60 Hz, 5A
Product Subcategory: Educational
Nominal Width: 4′
Sash Movement Direction: Vertical Rising
Region: International, U.S., and Canada
Blower Requirements: Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, SEFA 8 (Cabinet Surface Finish), UL 1805, UL 61010
Lighting: LED
Service Fixtures : 2
Style: Benchtop

Description

Features (All Models)

SEFA 1 High-Performance Hood.
Patented design.
By-pass airflow design.
Glacier white powder-coated steel frame.
Ergonomic air foil with aerodynamic Clean-Sweep airflow openings.
Low-profile, ADA-compliant spill trough.
Clear, 1/4″ thick, tempered safety glass sides, back, and removable baffle.
5° angled, 1/4″ thick tempered safety glass stationary viewing panel and 3/16″ thick chain-driven sash with anti-racking shaft and powder-coated steel frame that provides 37.5″ high visibility.
Powder-coated sash handle with aerodynamic Clean-Sweep airflow openings.
High-performance, 3-piece glass baffle that pivots for cleaning.
Cord-Keeper slots on the left and right side of the airfoil.
Pre-wired LED lighting, light switch, and blower switch.
Powder-coated stainless steel tissue screen located directly below exhaust outlet.
Removable front panel, side panels, and interior cover plates for access to plumbing and electrical wiring. Powder-coated stainless steel 12.81″ ID exhaust connection.

Vertical-Rising Sash Models Feature
Sash stop at 18″ height from the work surface (60% open). Can be field modified to 14″ from the work surface. The fully open sash is 28″ from the work surface.

Combination Sash Models Feature

Combination horizontal-sliding/vertical-rising sashes that allow the operator to use the hood with the sashes half open either horizontally or vertically.
Sash stop at 14″ height from the work surface (50% vertical opening). Can be field modified to 18″ from the work surface. The fully open sash is 28″ from the work surface.

Fixtured Models May Feature

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided.
One pre-wired GFCI electrical duplex receptacle on the lower right side.