Jete Group PTZ Camera Video Conference User Manual

Jete Group PTZ Camera Video Conference

CAUTION:

Please read the user manual first, for the installation and operation of the JETE camera.

SAFETY INSTRUCTIONS

To overcome damage that occurs, please use original cables/other supporting equipment.

• Avoid products with air/and other liquids.
• To reduce the risk of short circuit, do not disassemble the product. Service and maintenance may only be performed by a qualified technician.
• Do not use the product at high temperatures’, avoid direct sunlight.
• Clean the product by wiping gently, use a dry cloth to clean the lens, wipe gently with a little detergent/cleaning tool if needed, do not use detergent that causes strong corrosiveness to avoid damage to the lens which will impact the image.

ELECTRICAL SAFETY

Installation and use of this product must comply with electrical standards.

HANDLE GENTLY

• Avoid piling other objects on top of the camera.
• Avoid strong vibration with the camera during installation.
• Store the camera at room temperature

INSTALL CAREFU

• Do not rotate the camera head violently, as this may cause damage to the sensor.
• This product should be placed on a flat surface, do not place it tilted, because it will cause the image to lose focus slightly.
• Avoid liquids, oils that cause abrasions on the product.
• Make sure there is no dust/something blocking playback
• Do not turn on the product until everything is installed neatly.

PACKAGE CONTENT

1. Speakerphone

2. JETE Group Camera

3. Adaptor Power

4. Hub

5. Remote Control

6. Microphone *2pcs

7. 5M DIN6 Cable *2pcs

8. 3M USB Cable

9. User Manual

10. 4P4C Cable *3pcs

STRUCTURE PRODUCT

Speakerphone

1. Microphone 1 Port
2. Microphone 2 Port
3. DIN6 Cable Port
4. Light Indica
5. Bluetooth Indicator Light
6. Function Button
7. Volume Indicator

Camera

1. Lens
2. Camera Axle
3. Standby Indicator
4. Re mot IR Indicator
5. Power Indicator
6. DIN6 Cable Slot

Hub

1. DIN6 Cable Slot t
2. DIN6Cable Slot
3. USB Slot
4. Power Slot
5. Power Slot
6. Power Indicator
7. Bolt Hole
8. Cable Slot

REMOT IR

Remote Control

1. Power
2. Zoomin
3. Zoom out
4. Camera Direction
5. Mute Microphone
6. Responding to Calls
7. Vertical Mirror
8. Preset Button
9. RESET
10. 10: Volume+
11. Volume –
12. Initial Camera Position
13. End Call
14. Horizontal Mirror
15. Speaker Mute
16. Bluetooth Button

Perivale Speakerphone

| Preset Button| The button sets the position of the camera already saved on

the 1,2,3 button.

---|---|---
| Initial Camera Position| To restore the camera to its original position
| Zoom in/out| enlarge and diminish the camera
| Camera Direction| to set the direction of the camera: up, down, left. right
| Volume Button| Set Volume
| Bluetooth Button| To match Bluetooth
| Responding to C| Responding to calls
| End Call| End Call
| Microphone Mute| Turning Microphone

INSTALL CAMERA

• Steps to Install Camera

1. Connect the camera to the HUB using the DIN6 data cable
2. Connect the speaker to the HUB using the DIN6 data cable
3. Connect the HUB to the power adapter
4. Connect the HUB to the computer using a USB cable
5. connects Speakers to Microphones
6. Pu LL the power button on the HUB
7. Open the application to use, the camera and speaker will be connected perfectly
8. Select Webcam ( JETE Group Kamira)
9. Press the microphone and speaker buttons to start the audio

HOW TO BLUETOOTH PAIRING TO YOUR DEVICE

1. Press the Bluetooth button, then the (Y) indicator will blink which means the speaker is ready to be aligned
2. Find the Bluetooth name 11JETE GROUP” through the smartphone/com putter device
3. Once Bluetooth is successfully connected, the indicator will light blue
4. The speaker is ready for use.

Note: If it cannot be matched, please restart Bluetooth and turn it on again

INDICATOR STATUS

1. Turn on Bluetooth the green light will blink
2. After Bluetooth is turned on, the “Y” indicator will flash

HOW TO DOWNLOAD THE CAMERA ( PRESET KAMERA)

Preset Saving :

• Directs the camera to the position to be saved

• Press and hold the 1/2/3 preset button for 5 seconds, the preset will be saved automatically
  How to use the Preset:
  Press and hold the 1/2/3 preset button for 5 seconds, presets saved
  Note: The button will not work, if the preset has not been saved

• How to delete Preset :

• Press the RESET button for 5 seconds, all presets will be deleted.

HOW TO INSTALLATION FOR ADDITIONAL MICROFONES (OPSIONAL)

• Connect the microphone to the speaker using a 4p4c cable
• Put the 4p4c cable into the EXT1/EXT2 slot on the speaker.
• There’s a 11mute11 button and Light status on the microphone.
  • Green11 indicates that the microphone is active
  • Red11 indicate that the mic is inactive

Note: Please remove the extra microphone after the camera is Turn OFF

• Additional things to pay attention

1. Set the volume on the microphone and speaker comprehensively to ensure communication is clear and soft
2. Don’t turn on the microphone and the automatic speaker
3. Please turn off the audio function on the computer (as an echo suppressant and outside noise, etc.)

SPESIFICATION

zoom, lynch, vi yo, skype untuck basins dell.
Dimention| 115mmx115mmx34,5mm (LxWxH)
Accesories| Power adapter, cable USB 2.0, remote control, cable 2 DIN6, user manual
SPESIFICATION| LENS
---|---
Picture Sensor| 1/2. 7″ SONY HD CMOS
PIXEL| 2.1Mega Pixel
FOV| 88°
Focal Length| f=4.7-47 mm
Format HD| 1080P(19201080)
Signal System| NTSC/PAL
Voltage| DC12V
Power| 12W
Parameter Control
Translation/Pitching Angle| -175°- 175° -35°~55°
Translation/ Pitching Speed| 100°/s 80°/s
General Parameter
Size| Product:162172*175mm
Colour| Iron Gray
Model No| Speakerphone
---|---
Sound Parameter| Acoustic Echo cancellation(AEC):>65dB
Echo length cancellation: 500ms
Bidirectional noise compression(NC):<25dB
Automatic Direction finding Technology of Intelligent microphone(EMI)
Automatic gain control(AGC)
Audio Parameter| Microphone frequency response:1OOHz-22KHz
Speaker frequency response:100 Hz-22KHz
Speaker volume:95dB MAX.
Microphone sound-pickup diameter:
5 meters, 360 degrees full range
Bluetooth| Bluetooth devices available
** IR Reception| Angle: 360°
Distance:** 1Om IR Transparent transmission available
Mic External| 2 optional external microphones makes the sound-pickup range up to 10 m(33ft)
Dimension| 180mmx 180mmx42mm(LxWxH)

CAUTION

If users have difficulty understanding, it is recommended to start with the initial or default version first and not change any menus. This will help build a basic understanding before moving on to more advanced or complex options.

MAINTENANCE

• • Avoid excessive physical touch, excessive shock, and exposure to water .
• Pay attention to each camera component during installation and install the camera in the appropriate place .
• Avoid places that are too high and uneven terrain, to avoid dropping the camera .
• Hold the camera gently, do not press too hard, and do not touch the camera lens with your hands, so as not to scratch it, and do not reduce the quality of the lens .
• Do not use too much electrical power (use only ORIGINAL components), to avoid short circuits .
• Do not point the camera directly at the sun or other heat sources, this will cause the lens to become blurry and permanently damaged .
• Do not clean the camera lens with any liquid, it is recommended to blow it with a special camera blower .
• Do not disassemble the unit.

HOW TO WARRANTY CLAIM JETE PRODUCT:

1.  All warranty claims can be made at the list of Authorized Outlets listed on the warranty card.

2. Buyers can come to an authorized Outlet or contact Customer Service
   +62812-1739-3609 if they want to exchange the product on line.

3. All expedition shipping costs/ product postage a re borne by the buyer.

4. When claiming the warranty, the buyer is MANDATORY to show the completeness of the warranty:

   • A purchase receipt that clearly states the name of the outlet and the date of the transaction .
   • The product must still be within the specified warranty period .
   • Warranty card that has been filled out .
   • Box/Packing Product.

5. Please inform the constraints/ product damage that occurs to our staff.

6. WARRANTY DOES NOT APPLY if USER DAMAGE is found, namely:

   • BROKEN, CRACKED, BURNED, DROPPED, MODIFIED BY YOURSELF, SUBMERGED IN WATER.

7. If there are problems during warranty claims or other questions, please contact Customer Service +62812-1739-3609

TERMS AND CONDITIONS OF WARRANTY:

1. This warranty is valid for2 years for original JETE products.

2. This warranty is valid for the warranty period stated on the product packaging since the date of sale.

3. During the warranty period, the user is exempt from any replacement costs that may occur.

4. The user must show the warranty card and purchase receipt when applying for a warranty.

5. The warranty applies to functional damage:
   • Disfunction .
   • Audio not detected .
   • Indicator off .
   • Battery damage.

6. This warranty DOES NOT APPLY if:

   • PRODUCT IS BROKEN, CRACKED, BURNED, FALLEN,
   • MODIFIED YOURSELF, SOAKED IN WATER .
   • Supporting accessories such as: cables, adapters, etc .
   • Abnormal use, not stored properly, natural disasters, modified, or anything intentionally .
   • The product has been repaired by a third party .
   • The data is not filled in completely by the seller and buyer .
   • Damage caused by user error .
   • The product warranty period has expired.

CUSTOMER SUPPORT

  

CUSTOMER SERVICE

 jete.id
 jeteindonesia
 jeteindonesia
jeteindonesia

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>