PawHut 5663-1256 2800W Dog Dryer Blaster Pet Grooming Hair Dryer Instruction Manual

PawHut 5663-1256 2800W Dog Dryer Blaster Pet Grooming Hair Dryer

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

PET HAIR DRYER INSTRUCTION

• Name: Pet hair dryer
• Output power: 400W-2800W (Adjustable)
• Temperature: 35° C-70° C (Adjustable)
• Wind Speed: 25M/S-65M/S (Adjustable)
• This dryer is super, powerful air speed, and easy to use.
• The perfect low-noise design will bring you a better operating environment.

Operating instruction:

1. Open the package, take out the machine, and check the appearance and all accessories.
2. As shown, easily open the buckle, connect the front connector to the air outlet, and then secure it with the buckle. After that, connect the other end of the air tube to the mouthpiece you want and secure it with a snap button.
3. Choose the right voltage to avoid some damage.
4. Make sure the power is available, then turn on the power switch, and adjust the air speed. If necessary, turn on the heater and make its indicator light on.
   • Note: Do not turn on the heater switch until it is not plugged in, as this will cause damage.
5. By removing the back cover screws, take out the filter cotton at the air inlet and clean it regularly to avoid clogging and damage.
6. When the machine is not working, check the power supply first. If it still doesn’t work, don’t fix the machine yourself, but give it to a professional to fix it.

Friendly Reminder:

• The power supply voltage should be 220V/240V. Follow the instructions above to connect the power supply correctly.
• Take care to keep the machine away from water to prevent any moisture from being inhaled and to avoid any damage caused by short circuits of electrical components.

Installation Details

1. Gently release the ring;
2. Loosen the collar and remove it;
3. Correctly fix the clamp ring and threaded barrel with the front cover;
4. After that, fix the clamp ring in the card groove to prevent the threaded barrel from falling off;
5. Repeat steps 1 and 2 at the other end;
6. Choose any hair dryer you like;
7. Secure the hair nozzle in the same way as in steps 3 and 4.
8. Installation is complete.

Dryer Maintenance

1. Loosen the back cover screws first;
2. Then remove the back cover;
3. Remove the filter;
4. Reload the filter after cleaning;
5. Restore the back cover;
6. Finally, tighten the screws.

• If you have any questions, please contact our customer care center, Our contact details are below: 001-877-644-9366
• customerservice@aosom.com
• Imported by Aosom LLC
• 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
• MADE IN CHINA
• If you have any questions, please contact our customer care center, Our contact details are below: 0044-800-240-4004
• enquiries@mhstar.co.uk
• IMPORTER ADDRESS: MH STAR UK LTD Unit 27, Perivale Park, Horsenden Lane South Perivale, UB6 7RH MADE IN CHINA

Documents / Resources

| PawHut 5663-1256 2800W Dog Dryer Blaster Pet Grooming Hair Dryer [pdf] Instruction Manual
5663-1256, 5663-1280, 5663-1281, 5663-1256 2800W Dog Dryer Blaster Pet Grooming Hair Dryer, 5663-1256, 2800W Dog Dryer Blaster Pet Grooming Hair Dryer, Blaster Pet Grooming Hair Dryer, Pet Grooming Hair Dryer, Grooming Hair Dryer, Hair Dryer, Dryer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>