PawHut D04-059 Elevated Dog Cot Cooling Pet Bed Instruction Manual
- June 1, 2024
- PawHut
Table of Contents
PawHut D04-059 Elevated Dog Cot Cooling Pet Bed
Product Information
Specifications:
- Model: IN221100790V01_GL
- Dimensions: A- 2, B- 4, C- 4
- Weight: 180 grams
- Power: 102-113 Volts
Product Usage Instructions
Unpacking and Setup:
When you receive the product, carefully unpack it and ensure all components
are included as per the user manual.
Installation:
Follow the step-by-step installation guide provided in the manual to
correctly set up the product.
Powering On:
Connect the product to a power source with the specified voltage range
(102-113V) and turn it on using the designated power button.
Functionality:
Refer to the user manual for detailed instructions on how to utilize the
different functions of the product.
Frequently Asked Questions (FAQ):
-
Q: What should I do if the product does not power on?
A: Check the power source and connections to ensure they are secure. If the issue persists, contact customer support for assistance. -
Q: How do I clean the product?
A: Use a soft, damp cloth to gently wipe the exterior of the product. Avoid using harsh chemicals or abrasive materials. -
Q: Can I use the product for outdoor purposes?
A: It is recommended to use the product in indoor environments to prevent damage from external elements.
IMPORTANT INSTRUCTION
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
- To keep the bed and cover flat, please adjust the fabric with some force to move into the right position when assembling.
- For step 5-6, please align metal pipes with plastic parts first, then insert the pipes into the plastic parts.
- For step 5, the velcro may not be completely covered. As the cover being used for some time, will be a little looser than before, then you could tighten the cover the velcro completely.
- When the cover has been used for a while, you will be able to tighten the velcro.
PARTS
ASSEMBLY INSTRUCTION
- Separate the velcro on the back of the cover and insert the metal pipe A into the fabric as illustrated.
- lnsert 2 bed legs B into metal pipe A.
- lnsert 2 metal pipes C into the bed legs B as illustrated.
- Connect the 2 centre plastic junctions D to the bed support leg E as illustrated. Then insert plastic junctions D into metal pipes C.
- lnsert the other 2 metal pipes C into plastic junctions D.
- Connect metal pipe A with 2 bed legs B, then insert B into pipes C.
- Pull hard over the metal pipe A, then stick the velcro. (see note 3)
- Turn the pet bed over.
- Parts G and H required.
- lnsert 4 tent poles H to the plastic connectors through the holes on the canopy.
- Canopy finished! (Note: To connect the canopy witht the pet bed correctly; the bigger angles of the canopy should be pointed to the long sides of the bed, the smaller angles of the canopy should be pointed to the short sides of the bed.)
- Plug the tent pole ends to the corners of the bed.
- Secure the canopy with the bungee cords at each corner of the bed legs B.
- Finished! ( Note: The canopy side with plastic connectors faces outwards)
US
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
UK
If you have any questions, please contact our customer care center.
Our contact details are below:
044-800-240-4004
Menquiries@mhstar.co.uk
IMPORTER ADDRESS: MH STAR UK LTD Unit 27, Perivale Park, Horsenden lane
South Perivale, UB6 7RH
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>