PawHut D00-193V00 Pet Stroller Instruction Manual
- September 13, 2024
- PawHut
Table of Contents
PawHut D00-193V00 Pet Stroller
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
WARNING : Keep Away From Fire
- Please read this instruction carefully before use and keep it properly for future reference. If you do not follow this instruction, the safety of pets may be affected.
- Do not leave the caregiver while the product is in use.
- Do not use accessories not provided by the manufacturer.
- Any load attached to the handle will affect the stability of the pet stroller.
- Ensure that all the locking devices are assembled before using the pet stroller.
- Pets must use restraints when using.
- Do not use the pet stroller in rough areas, near stoves and other dangerous areas.
- Avoid use or storage in damp, cold or high-temperature environments and keep away from fire or strong heat source.
- Do not use it to put dangerous animals which are aggressive and destructive.
Maintenance and Care
Please check and maintain the pet stroller frequently. The cloth cover cannot be dipped and washed. When the cloth cover is cleaned, please use a brush and other cleaning instruments to clean the dirt.
Parts
Unfolding and folding pet stroller
-
Unfolding frame
Take out the frame, hold the handle bar and lift it up. It is ok when you hear “click”.After opening the frame, unfold the canopy and zip it up. -
Folding frame
In the braking state, unzip the zipper and close the canopy first. And then, lift up the two sides of the folding keys, hold the handle to press down. The frame can be folded and hang the hook finally. -
Usage of front wheels
Insert the front wheel into the hole of the front wheel seat and hear the “click”.Hold the removal button and pull it down, the front wheel can be removed. -
Usage of rear wheels
Insert the iron gasket, rear wheel seat, and rear wheel into both sides of the rear wheel axle in turn, and add an iron gasket to each out axle hole of the rear wheel.
Insert the bayonet lock, and finally cover the rear wheel cover to assemble the rear wheel set, put the rear wheel set on the rear foot tube, and hear the“click”sound. To remove it, press the buckle on the rear wheel seat and pull it out.
Step down the brake rod on both sides of the rear wheel, the rear wheel is in the braking state, The rear wheel motion state can be restored by lifting the rear wheel brake rod upward. -
For pet safety belts
If you have any questions, please contact our customer care center, Our
contact details are below:
0044-800-240-4004
enquiries@mhstar.co.uk
IMPORTER ADDRESS: MH STAR UK LTD
Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH MADE IN CHINA
UK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>