EPOMAKER P75 Wireless Aluminum Mechanical Keyboard Owner’s Manual
- September 13, 2024
- EPOMAKER
Table of Contents
EPOMAKER P75 Wireless Aluminum Mechanical Keyboard
FUNCTION KEY COMBINATIONS
WINDOWS MAC
| FN +F1 | Multi-media Player | FN+F1 | Screen Brightness – |
|---|
FN +F2
|
Volume-
|
FN+F2
|
Screen Brightness+
FN +F3
|
Volume+
|
FN+F3
|
FN +F4
|
Mute
|
FN+F4
|
FN +F5
FN +F6
|
Stop
Previous track
|
FN+F5
FN+F6
|
Keyboard Backlight Brightness –
Keyboard Backlight Brightness +
FN +F7
| Play/Pause|
FN+F7
| Previous track
FN +FB
|
Next track
|
FN+FB
|
Play/Pause
FN +F9
|
|
FN+F9
|
Next track
FN + F10
|
Homepage
|
FN + F10
|
Mute
FN + F11
|
Calculator
|
FN + F11
|
Volume-
FN + F12
|
Search
|
FN + F12
|
Volume+
FN + DEL
|
INSERT
|
FN+HOME
|
END
FN+HOME
|
END
| |
FN+PGUP
|
PRTSC
| |
FN+PGDN
|
PAUSE
| |
FN+WIN
|
Lock/Unlock Win Key
| |
FUNCTION KEY COMBINATIONS
LIGHT EFFECTS
SPECIFICATION
PAIRING BLUE TOOTH
Toggle the switch to the left (Bluetooth side), and make sure that the keyboard is under Bluetooth mode:
- Hold Fn+Q/W/E for 3-5 Left (Bluetooth side), make sure that the keyboard is under the seconds till the indicator flashes fast, the keyboard is ready to pair.
- Turn on your Bluetooth keyboard is connected to device and find “Epomaker P75 -1/2/3”, then connect. When the the Bluetooth device, the indicator stops flashing and the connection is done.
- Press Fn+Q/W/E to tog gle between the Bluetooth devices 1/2/3.
PAIRING WIRE
Toggle the switch to the wireless mode: LESS 2.4GHz Right (2.4G side), make sure that the keyboard is under the 2.4G
- Hold Fn+R for 3-5 seconds till the indicator flashes fast, and the keyboard is ready to pair.
- Insert the 2.4G dongle into your computer. When the keyboard is connected, the stops flashing.
WIRED MODE
Toggle the switch to the middle and plug the keyboard.
Note: The battery charges under either wireless or wired mode, as long as the keyboard is plugged in.
BATTERY INDICATOR
- Low Battery: Fn key blin
- Press the FN+ENTER key to C
- ENTER key shows a red light for charging and a green light for fully charged.
BATTERY CHECK
- Hold the Fn+Spacebar, and the keys from to O light up to show the battery percentage; for
- example, if the keys from battery life is currently 60 1 to 6 light up when holding the Fn+ Spacebar, which means that the
- %; if keys of 1-0 light up, battery life is 100%.
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to- remove-and-replace-your-mechanical-keyboard-switches
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically {on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note : If the key doesn’t work it’s possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email support@epomaker.com with your purchase order number and a detailed description of your issue. We normally respond to inquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts. Cl https://discord.gg/2q3Z7C2
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker. We provide a 1-year warranty for our products when bought from our website {EPOMAKER.com). Your item will not be covered by your 1-year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.
CONTACT INFORMATION
- Made in China
- Manufacturer: Shenzhen Changyun Technology Co., Ltd. Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road, Xiii Street, Nanshan District, Shenzhen, Guangdong, CN
- Email: support@epomaker.com
- Web: www.epomaker.com
- APEX CE SPECIALISTS GMBH
- Habichtweg 1 41468 Neuss Germany
- Contact: Wells Yan
- E-mail: info@apex-ce.com
- APEX CE SPECIALISTS LIMITED
- 89 Princess Street, Manchester, M1 4HT, UK
- Contact: Wells Yan
- E-mail: info@apex-ce.com