premio AIO Series Touch Panel PC User Manual

September 27, 2024
premio

AIO Series Touch Panel PC

“`html

Product Information

Specifications

  • Product Name: AIO Series All In One Touch Panel PC
  • Revision: 1.0
  • Manual Released Date: 2024/06/18

Product Usage Instructions

Safety Precautions

Before installing and using the equipment, please read the
following precautions:

  • Put this equipment on a reliable surface during installation.
    Dropping it or letting it fall could cause damage.

  • The power outlet shall be installed near the equipment and
    shall be easily accessible.

  • Turn off the system power and disconnect the power cord from
    its source before making any installation. Be sure both the system
    and the external devices are turned OFF. Sudden surge of power
    could ruin sensitive components.

  • Make sure the equipment is properly grounded.

  • When the power is connected, never open the equipment. The
    equipment should be opened only by qualified service
    personnel.

  • Make sure the voltage of the power source is correct before
    connecting the equipment to the power outlet.

  • Disconnect this equipment from the power before cleaning. Use a
    damp cloth. Do not use liquid or spray detergents for
    cleaning.

  • Avoid the dusty, humidity, and temperature extremes.

  • Do not place heavy objects on the equipment.

  • If the equipment is not used for a long time, disconnect it
    from the power to avoid damage.

Front Panel Controls

The front panel controls allow users to interact with the device
easily. Familiarize yourself with the functions of each control for
efficient operation.

System Setup

Follow these steps for system setup:

  1. Replacement of Internal Modules: Refer to section 3.1 for
    detailed instructions.

  2. Replacement of Memory Module: See section 3.2 for guidance on
    replacing memory modules.

  3. Replacement of M.2 Storage Module: Section 3.3 provides
    information on replacing M.2 storage modules.

  4. Install Wireless Network Card and Antenna: Follow the
    instructions in section 3.4 to install a wireless network card and
    antenna.

FAQ

Q: Can I clean the device with liquid detergents?

A: No, it is recommended to use a damp cloth for cleaning.
Liquid or spray detergents should not be used to clean the
equipment.

Q: How should I handle power surges?

A: Turn off the system power and disconnect the power cord from
its source to prevent power surges that could damage sensitive
components.

“`

USER’S MANUAL
AIO Series
All IN One Touch Panel PC

Table of Contents

AIO Series l User’s Manual

Prefaces ………………………………………………………………………………………………….. 03
Revision ……………………………………………………………………………………………….. 03 Disclaimer …………………………………………………………………………………………….. 03 Copyright Notice …………………………………………………………………………………… 03 Trademarks Acknowledgment ………………………………………………………………. 03 Environmental Protection Announcement …………………………………………….. 03 Safety Precautions …………………………………………………………………………………. 04 Technical Support and Assistance …………………………………………………………. 05 Conventions Used in this Manual ………………………………………………………….. 05 Package Contents …………………………………………………………………………………. 06 Ordering Information ……………………………………………………………………………. 06 Available Models ……………………………………………………………………………….. 06
Chapter 1 Product Introductions ………………………………………………………….. 07
1.1 Overview ……………………………………………………………………………………………….. 08 Key Feature ………………………………………………………………………………………….. 08
1.2 Hardware Specification ………………………………………………………………………….. 09 1.3 System I/O ……………………………………………………………………………………………… 11 1.4 Mechanical Dimension …………………………………………………………………………… 14
Chapter 2 Front Panel Controls …………………………………………………………… 17
2.1 Users Controls ……………………………………………………………………………………….. 18
Chapter 3 System Setup ………………………………………………………………………. 19
3.1 Replacement of Internal Modules ………………………………………………………….. 20 3.2 Replacement of Memory Module ………………………………………………………….. 21 3.3 Replacement of M.2 Storage Module …………………………………………………….. 22 3.4 Install wireless network card and antenna ……………………………………………… 23
Appendix ………………………………………………………………………………………………. 25

22

Preface
Prefaces

AIO Series l User’s Manual

Revision

Revision 1.0

Description Manual Released

Date 2024/06/18

Disclaimer
All specifications and information in this User’s Manual are believed to be accurate and up to date. C&T Solution Inc. does not guarantee that the contents herein are complete, true, accurate or non-misleading. The information in this document is subject to change without notice and does not represent a commitment on the part of C&T Solution Inc. C&T Solution Inc. disclaims all warranties, express or implied, including, without limitation, those of merchantability, fitness for a particular purpose with respect to contents of this User’s Manual. Users must take full responsibility for the application of the product.

Copyright Notice
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, without the prior written permission of C&T Solution Inc. Copyright © C&T Solution Inc.

Trademarks Acknowledgment
Intel®, Celeron® and Pentium® are trademarks of Intel Corporation. Windows® is registered trademark of Microsoft Corporation. AMI is trademark of American Megatrend Inc. IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation All other products and trademarks mentioned in this manual are trademarks of their respective owners.

Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution and ensure environment protection.

33

Preface

AIO Series l User’s Manual

Safety Precautions
Before installing and using the equipment, please read the following precautions: Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage. The power outlet shall be installed near the equipment and shall be easily accessible. Turn off the system power and disconnect the power cord from its source before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden surge of power could ruin sensitive components. Make sure the equipment is properly grounded. When the power is connected, never open the equipment. The equipment should be opened
only by qualified service personnel. Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet. Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning. Avoid the dusty, humidity and temperature extremes. Do not place heavy objects on the equipment. If the equipment is not used for long time, disconnect it from the power to avoid being
damaged by transient over-voltage. The storage temperature shall be above -20°C and below 60°C. The computer is provided with a battery-powered real- time clock circuit. There is a danger of
explosion if incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. If one of the following situation arises, get the equipment checked be service personnel:
· The power cord or plug is damaged. · Liquid has penetrated into the equipment. · The equipment has been exposed to moisture. · The equipment does not work well or it cannot work according the user’s manual. · The equipment has been dropped and damaged. · The equipment has obvious signs of breakage.

44

Preface

AIO Series l User’s Manual

Technical Support and Assistance

1. Visit the C&T Solution Inc website at https://www.candtsolution.com/ where you can find the latest information about the product.

2. Contact your distributor, our technical support team or sales representative for technical support if you need additional assistance. Please have following information ready before you call: Model name and serial number Description of your peripheral attachments Description of your software (operating system, version, application software, etc.) A complete description of the problem The exact wording of any error messages

Conventions Used in this Manual
This indication alerts operators to an operation that, if not strictly observed, may result in severe injury.

WARNING

This indication alerts operators to an operation that, if not strictly observed, may result in safety hazards to personnel or damage to equipment.

CAUTION

This indication provides additional information to complete a task easily.

NOTE

55

Preface

AIO Series l User’s Manual

Package Contents

Before installation, please ensure all the items listed in the following table are included in the package.

Item Description

Q’ty

1

AIO-200-ADL-N97 Series All IN One Touch Panel PC

1

2

Adapter 60W 12V 5A

1

3

128G M.2 B key SSD

1

4

8GB DDR5 4800 MT/s

1

Ordering Information

Model No.

Description

1-E09A06012 Adapter Output 12V 5A 60W / Input 100-240V

3-WIFI0801S10 WIFI 6E Module KIT, Intel, 2T2R & BT 5.3

1-TCOM00041 COM cable (CT-240125-01/CHEN PERNG)

Available Models
Model No. AIO-W210C-ADL-N97 AIO-W215C-ADL-N97 AIO-W221C-ADL-N97

Description
10.1″ WXGA Capacitive All IN One Touch Panel PC with Intel® Alder lake N97 Processor
15.6″ Full HD Capacitive All IN One Touch Panel PC with Intel® Alder lake N97 Processor
21.5″ Full HD Capacitive All IN One Touch Panel PC with Intel® Alder lake N97 Processor

66

Chapter 1
Product Introductions

Chapter 1: Product Introductions
1.1 Overview

AIO Series l User’s Manual

Key Features
10.1″ / 15.6″ / 21.5″ All IN One Touch Panel PC World Class Certifications for Safety and Reliability: CE/FCC/CB/UL/UKCA/IC Front IP65 Rating for protection against water and dust Scratch Resistant 7H Glass Hardness Versatile Display Outputs; HDMI and DP MTBF Up to 30,000 Hours MTBF Up to 50,000 Hours (AIO-W221-ADL-N97 only)

88

Chapter 1: Product Introductions

AIO Series l User’s Manual

1.2 Hardware Specification

Display
LCD Size Max. Resolution Brightness (cd/m2) Contrast Ratio LCD Color Pixel Pitch (mm)
Viewing Angle (H-V)
Backlight MTBF

AIO-W210ADL-N97
10.1″ (16:10) 1280 x 800
400 800:1 16.7M 0.169(H) x 0.1695 (V)

AIO-W215-ADL-N97
15.6″ (16:9) 1920 x 1080 (FHD)
400 800:1 16.7M 0.17925 (H) x 0.17925 (V)

AIO-W221-ADL-N97
21.5″ (16:9) 1920 x 1080 (FHD)
500 1,000:1 16.7M 0.248 (H) x 0.248 (V)

89/89/89/89 (Typ.) (CR>=10)
30,000 Hours

85 /85 /85 /85 (Typ.) (CR>=10)
30,000 Hours

89/89/89/89 (Typ.) (CR>=10)
50,000 Hours

Touch · Projected Capacitive
AIO-W210C / AIO-W215C / AIO-W221C · Surface Hardness
7H / IK07 System · Processor
Intel® Processor N97 6M Cache, up to 3.60 GHz · System Chipset SoC integrated · LAN Chipset GbE1: Intel I225-V (Support Wake-on-LAN and PXE) GbE1: Intel I225-V (Support Wake-on-LAN and PXE) · Audio Codec Realtek ALC897 · System Memory Default 8GB DDR5 4800MT/s SODIMM (up to 16GB)

· BIOS AMI uEFI 8Mbit SPI BIOS
· Watchdog Software Programmable Supports 1~255 sec. System Reset
Storage · SSD/HDD
128G M.2 B Key SSD (Default) Expansion · M.2
M.2 E Key Support WiFi 6e (Optional)

99

Chapter 1: Product Introductions

AIO Series l User’s Manual

I/O · DisplayPort
HDMI / DP / LVDS / eDP · COM
2x RS-232/422/485 by internal cable · USB
6x USB 2.0 by internal cable (Customized) 4x USB 3.2 Gen 2 · LAN 2x 2.5G LAN · Audio 1x Audio out · Others Support up to 6x Antenna (optional)

Operating System · Windows
Windows 10 / Windows 11 · Linux
Linux Ubuntu 22.04 Power · Power Adapter
60W (12V 5A, Default) · Power Supply Voltage
DC 12~36V · Power Connector
DC Jack 5.5mm/2.5mm

Environment · Operating Temp
-10°C to 50°C

Physical · Dimension
1. AIO-W210-ADL-N97 :

· Storage Temp -20°C to 60°C

256 (W) x 170 (H) x 50 (D) mm 2. AIO-W215 -ADL-N97:

· Relative Humidity 10% to 80% (non-condensing)

400 (W) x 249 (H) x 50 (D) mm 3. AIO-W221-ADL-N97 :

· Certification CE, FCC, CB, UL, UKCA, IC
· Vibration IEC60068-2-64:2008 With SSD: 5 Grms (5 – 500 Hz, 0.5 hr/axis)

538 (W) x 329 (H) x 62 (D) mm · Weight
1. AIO-W2101.4 Kg 2. AIO-W2152.3 Kg 3. AIO-W2215.2 Kg

Designed to comply with MIL-STD-810G Method · Mounting

514.7 Procedure I

Panel Mounting Holes M3

· Shock IEC60068-2-27:2008

With SSD: 50G half-sin 11ms Designed to comply with MIL-STD-810G Method

516.7 Procedure I

1100

Chapter 1: Product Introductions
1.3 System I/O
1.3.1 AIO-W210-ADL-N97

AIO Series l User’s Manual

Power On/Off Press to power-on or power-off the system
USB 3.2 Gen 2 port Used to connect USB 3.2 device
Line-out Used to connect a speaker
DC IN Used to plug a DC power input with terminal Block
COM port COM1 ~ COM2 support RS232/422/485 serial device

LAN port Used to connect the system to a local area network
DisplayPort Used to connect a DisplayPort monitor
HDMI Used to connect a HDMI monitor
Antenna hole Used to connect an antenna for optional WiFi module

1111

Chapter 1: Product Introductions
1.3.2 AIO-W215-ADL-N97

AIO Series l User’s Manual

Power On/Off Press to power-on or power-off the system
USB 3.2 Gen 2 port Used to connect USB 3.2 device
Line-out Used to connect a speaker
DC IN Used to plug a DC power input with terminal Block
COM port COM1 ~ COM2 support RS232/422/485 serial device

LAN port Used to connect the system to a local area network
DisplayPort Used to connect a DisplayPort monitor
HDMI Used to connect a HDMI monitor
Antenna hole Used to connect an antenna for optional WiFi module

1122

Chapter 1: Product Introductions
1.3.3 AIO-W221-ADL-N97

AIO Series l User’s Manual

Power On/Off Press to power-on or power-off the system
USB 3.2 Gen 2 port Used to connect USB 3.2 device
Line-out Used to connect a speaker
DC IN Used to plug a DC power input with terminal Block
COM port COM1 ~ COM2 support RS232/422/485 serial device

LAN port Used to connect the system to a local area network
DisplayPort Used to connect a DisplayPort monitor
HDMI Used to connect a HDMI monitor
Antenna hole Used to connect an antenna for optional WiFi module

1133

Chapter 1: Product Introductions
1.4 Mechanical Dimensions
1.4.1 AIO-W210-ADL-N97

AIO Series l User’s Manual Unit: mm

1144

Chapter 1: Product Introductions
1.4.2 AIO-W215-ADL-N97

AIO Series l User’s Manual Unit: mm

1155

Chapter 1: Product Introductions
1.4.3 AIO-W221-ADL-N97

AIO Series l User’s Manual Unit: mm

1166

Chapter 2
Panel Controls

Chapter 2: Panel Controls
2.1 Users Controls

AIO Series l User’s Manual

Power On/Off Power Button System power on or off.
1188

Chapter 3
System Setup

Chapter 3: System Setup

AIO Series l User’s Manual

Set torque force to 3.5 kgf-cm to execute all the screwing and unscrewing.

3.1 Replacement of Internal Modules

WARNING

In order to prevent electric shock or system damage, before removing the chassis cover, must turn off power and disconnect the unit from power source.

1. Use a screwdriver to remove the four screws securing the back cover.

2. After removing the screws, detach the main unit from the screen.
*Be careful not to pull on the cable to avoid the contacts from coming loose.

2200

Chapter 3: System Setup
3.2 Replacement of Memory Module

AIO Series l User’s Manual

1. Pull out the locking tabs on both sides of the memory slot to release the memory module, allowing it to pop out.

2. After the memory module pops up, pull it out. Carefully remove the thermal pad underneath the memory module.

2211

Chapter 3: System Setup
3.3 Replacement of M.2 Storage Module

AIO Series l User’s Manual

1. Use a screwdriver to remove the single screw securing the M.2 card. After removing the M.2 card, carefully remove the thermal pad underneath.

2222

Chapter 3: System Setup
3.4 Install wireless network card and antenna

AIO Series l User’s Manual

1. Install the network card in the designated red frame and secure it with screws.

2. Ensure the internal antenna is securely connected to the network card, and the antenna interface is properly installed in the designated opening on the chassis cover.

2233

Chapter 3: System Setup

AIO Series l User’s Manual

3. Connect the external antenna to the internal antenna, reattach the main unit to the screen following the original steps, and secure it with the four screws.

2244

Appendix ­ Panel Mount
VESA Mount / Panel Mount:

AIO Series l User’s Manual

Panel mount bracket

Model

Panel Mount Kit

AIO-W210-ADL-N97

6

AIO-W215-ADL-N97

10

AIO-W221-ADL-N97

12

VESA mount bracket (75mm x 75mm/100mm x 100mm)

2255

Appendix ­ Panel Mount

AIO Series l User’s Manual

Mounting Guide
Flush Mount / Panel Mount:
· Cut hole in the wall w/ dimensions according to the screen size you have purchased. Please refer to the next page for the list of cutout dimensions and max wall depths

mm

Max. wall

mm

Thickness for size

of AIO Series

· From the FRONT of the wall, place the AIO Panel PC with its rear (display screen forward) into the measured cutout hole.

REAR
· Install the mounting clips around the AIO and screw them in to secure against the wall. If the wall’s thickness is greater than maximum wall thickness allowed, the clips will not fit. Please refer to the next page for the list of max wall depths

FRONT
2266

Appendix ­ Panel Mount
AIO Series
Model AIO-W210-ADL-N97 AIO-W215-ADL-N97 AIO-W221-ADL-N97

AIO Series l User’s Manual

Wall Cut-Out (W x H) Unit: mm Max Wall Thickness (mm)

247 x 161

8

392 x 241

8

526 x 316

11

11207

Premio Inc. All Rights Reserved www.premioinc.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals