premio DBX0x, DBT0X 3.5 inch single board computer User Manual

: August 16, 2024
: premio

Table of Contents

premio DBX0x, DBT0X 3.5 inch single board computer
Specifications
Features & Interfaces
Driver Installation
System BIOS
Mechanical Specifications
Technical Support and Assistance
Conventions Used in this Manual
FAQs
Read User Manual Online (PDF format)
Download This Manual (PDF format)

premio DBX0x, DBT0X 3.5 inch single board computer

Specifications

Model: CT-DBX0x
Available Models: CT-DBT0X
Mini-PCIe Slot #2 (MINI_PCIE1)
ATX Power Connector (POWER_CONN)
PS/2 Keyboard/Mouse Connector (PS2)
SATA Signal Connectors: SATA1_2
SATA Power Connectors (SATA1/2_PWR)
USB 2.0 Pin Header (USB_1/2)
Jumper Settings: Backlight Power (JP1), Panel Power (JP2), Clear CMOS (JP8)
GPIO Configuration
Watchdog Timer

Product Description
The CT-DBX0x is a versatile device with various connectivity options including Mini-PCIe slots, SATA connectors, USB headers, and more.

Block Diagram
The block diagram showcases the internal components and connectivity options of the device.

Features & Interfaces

The device offers GPIO configuration and a watchdog timer for enhanced functionality.

Driver Installation

Refer to Chapter 4 of the user manual for detailed instructions on driver installation.

System BIOS

Chapter 5 provides information on the chipset, Northbridge, and Southbridge configurations for system BIOS setup.

Mechanical Specifications

This section details the physical dimensions and layout of the device.

Technical Support and Assistance

If you require any technical support or assistance, please refer to the relevant section in the manual or contact our customer support team.

Conventions Used in this Manual

Understand the conventions used in the manual to make the most out of the information provided.

FAQs

Q: How do I clear the CMOS on the device?
A: To clear the CMOS, locate jumper JP8 on the board and follow the instructions provided in the user manual to reset the settings.

Disclaimer
All specifications and information in this User’s Manual are believed to be accurate and up to date. Premio Inc. does not guarantee that the contents herein are complete, true, accurate or non-misleading. The information in this document is subject to change without notice and does not represent a commitment on the part of Premio Inc. Premio Inc. disclaims all warranties, express or implied, including, without limitation, those of merchantability, fitness for a particular purpose with respect to contents of this User’s Manual. Users must take full responsibility for the application of the product.

Copyright Notice
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, without the prior written permission of Premio Inc. Copyright © Premio Inc.

Trademarks Acknowledgment
Intel®, Celeron® and Pentium® are trademarks of Intel Corporation. Windows® is registered trademark of Microsoft Corporation. AMI is trademark of American Megatrend Inc. IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation All other products and trademarks mentioned in this manual are trademarks of their respective owners.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution and ensure environment protection.

Safety Precautions
Before installing and using the equipment, please read the following precautions: Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage. The power outlet shall be installed near the equipment and shall be easily accessible. Turn off the system power and disconnect the power cord from its source before making any
installation

. Be sure both the system and the external devices are turned OFF. Sudden surge of power could ruin sensitive components. Make sure the equipment is properly grounded. When the power is connected, never open the equipment. The equipment should be opened only by qualified service personnel. Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet. Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning. Avoid the dusty, humidity and temperature extremes. Do not place heavy objects on the equipment. If the equipment is not used for long time, disconnect it from the power to avoid being
damaged by transient over-voltage.

The storage temperature shall be above -40°C and below 85°C. The computer is provided with a battery-powered real-time clock circuit. There is a danger of
explosion if incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. If one of the following situation arises, get the equipment checked be service personnel:
· The power cord or plug is damaged. · Liquid has penetrated into the equipment. · The equipment has been exposed to moisture. · The equipment does not work well or it cannot work according the user’s manual. · The equipment has been dropped and damaged. · The equipment has obvious signs of breakage.

5

Preface

CT-DBT0X l User’s Manual

Technical Support and Assistance

1. Visit the Premio Inc website at www.premioinc.com where you can find the latest information about the product.

2. Contact your distributor, our technical support team or sales representative for technical support if you need additional assistance. Please have following information ready before you call: Model name and serial number Description of your peripheral attachments Description of your software (operating system, version, application software, etc.) A complete description of the problem The exact wording of any error messages

Conventions Used in this Manual

This indication alerts operators to an operation that, if not strictly observed, may result in severe injury.

WARNING

This indication alerts operators to an operation that, if not strictly observed, may result in safety hazards to personnel or damage to equipment.

CAUTION

NOTE

This indication provides additional information to complete a task easily. 6

Chapter 1
Product Introductions

Chapter 1: Product Introductions

CT-DBT0X l User’s Manual

1.1 Product Description
The CT-DBT0x is a single board computer in 3.5″ SBC form factor featuring the Intel® Celeron® J1900 Series in FCBGA1170 package on 22nm process technology in a single chip solution. One 204-pin SODIMM sockets supports non- ECC/unbuffered DDR3L 1333MHz memory up to 4GB. The Intel® HD graphics controller integrated within the processor supports three independent displays (VGA, HDMI, LVDS). The CT-DBT0x supports 2x Gigabit Ethernet, USB 3.0/2.0, COM, GPIO, 2x Mini-PCIe slots, microSD card SIM card to support a variety of industrial applications.

8

Chapter 1: Product Introductions
1.2 Specifications
Processor
· Intel® Celeron® Processor J1900 (2.0GHZ/4C/10W)
System Memory
· One 204-pin DDR3L SODIMM socket · Non-ECC/unbuffered · Data transfer rates up to 1333MT/s · Memory size up to 4GB
BIOS
· AMI uEFI 8MB SPI flash
Graphics
· Intel 7th generation graphics and media encode/decode engine
Ethernet
· 2 x Intel I210IT GbE Controller
Audio
· Realtek ALC886
Watchdog Timer
· H/W Reset, 0 255 steps · Step = 1 sec. or 1 min
H/W Monitor
· Voltages monitoring · Temperature monitoring · Smart fan supported
TPM
· N/A
Mechanical & Environmental
· Dimension: 146mm x 102mm · Power Input: DC +12V input · Power Management: ACPI 5.0 compliant · Operating Temp: -20°C ~ 70°C · Storage Temp: -40°C ~ 85°C · Operating Humidity: 10% ~ 90% relative humidity,
non-condens i ng

CT-DBT0X l User’s Manual
I/O
· Internal I/O 1 x 2-ch 24bit LVDS 1 x SATA 2.0 3 x RS-232/422/485 4 x USB 2.0 1 x Line-In, Line Out & Mic-In 1 x 8-bit GPIO 1 x PS/2 keyboard mouse 1 x microSD card socket 1 x SIM card socket 1 x FAN connector
· Rear I/O 1 x HDMI 1 x VGA 1 x RS-232/422/485 1 x USB 3.0 1 x USB 2.0 2 x GbE
· Expansion 2 x Full size mini PCIe slot (CT-DBT01) 1 x Full size mini PCIe slot, 1 x mSATA (CT-DBT02)
· Storage Temp. -40°C ~ 85°C, 95% (non-condensing), Non- operating
· Relative Humidity 10% ~ 90% relative humidity, non-condensing
ORDERING INFORMATION
Packing List
· 1 x COM port cable · 1 x PS/2 cable · 1 x SATA cable · 1 x Power cable · 1 x Driver DVD
Ordering Information
· CT-DBT0X-J1900 w/ Intel® Celeron® Processor J1900 (2.0GHz/10W)

9

Chapter 1: Product Introductions
1.3 Available Models

Model No.
CT-DBT01 CT-DBT02

Processor
Celeron® J1900 Celeron® J1900

CT-DBT0X l User’s Manual

Ordering Information Part Number

CT-DBT01-J1900

6-DBT0104S100-P0

CT-DBT02-J1900

6-DBT0204S100-P0

Mini PCIe Slot BOM Options Mini PCIe slot #1

CT-DBT01

PCIe x1 only

CT-DBT02

mSATA only

Mini PCIe slot #2
PCIe x1 & USB 2.0 PCIe x1 & USB 2.0

10

Chapter 1: Product Introductions
1.4 Block Diagram

CT-DBT0X l User’s Manual

11

Chapter 2
Mechanical Specifications

Chapter 2: Jumper & Connectors
2.1 Dimensions
0
53.4

0 43.34

CT-DBT0X l User’s Manual Units: mm

8.96 14.69 30.86 78.26 87.46 89.34 106.05 132.96 142.89 146

0 2.13 2.62 8.96 28.19 48.8 62.71 88.69 103.33 123.81 140.08 142.89 144.13

98.38 98.06
74.74
59.44 48.53 46.23 42.55
27.37 22.61 16.89 12.83 8.76 3.18
0
6.25 0
18.2

3.3

9.65

13.21

15.07

28.702

98.43

99.7 97.96

87.97 85.78

44.39

30.35 29.48

22.29

15.14

82.13 128.28
142.88 143.64

102 98.38 96.15 74.92 67.04
27.84 11.13
3.18
16.5 13.45 1.6
13

Chapter 2: Jumper & Connectors
2.2 Board Layout
AUDIO FAN

CT-DBT0X l User’s Manual
USB_1 USB_2 JP1JP2

SATA2_PWR

DIMM

MINI_PCIE2 CN1

SATA2

JP3 SIM1

JP4 SATA1

PCIE1_MSATA

GPI O DBG

SATA1_PWR

MI CRO_S D PS2

COM4

COM3

LED

COM2

COM1

USB_3 HDMI

RJ45

VGA

2.2.1 Connectors & Jumpers

Connector
AUDIO CN1 COM1 COM2-4 DBG DIMM FAN GPIO HDMI JP1 JP2 JP3 JP4 JP6 JP8

Description
Front Audio connector Backlight Control connector RS-232/422/485 DB9 connector RS-232 COM2-4 headers LPC connector 204-pin SODIMM socket Fan connector GPIO header HDMI port Backlight Power Select jumper Panel Power Select jumper Power Button header Reset Button header Battery connector Clear CMOS

Connector

Description

I2C1

I2C header

LED

LED header

LVDS

LVDS connector

MICRO_SD

mi croSD card sl ot

MINI_PCIE2 Mini PCI Express slot 2

PCIE1_MSATA Mini PCI Express slot 1

POWER_CONN ATX Power connector

PS2

PS/2 KB/MS wafer connector

RJ45

LAN ports

SATA1/2

SATA Port 1/2 signal connector

SATA1/2_PWR SATA Port 1/2 power connector

SIM1

SIM card slot

USB_1/2

USB 2.0 headers

USB_3

USB 2/0/3.0 ports

VGA

VGA connector

14

Chapter 2: Jumper & Connectors
2.3 External Connectors

CT-DBT0X l User’s Manual

COM1

VGA

USB 2.0 HDMI

LAN

2.3.1 Serial Port COM1

2.3.1.1 RS-2332 Mode

Signal

1

DCD, Data Carrier Detect

6

2

RXD, Receive Data

7

3

TXD, Transmit Data

8

4

DTR, Data Terminal Ready

9

5

GND, Ground

2.3.1.2 RS-422 Mode

Signal

1

TXD-, Transmit Data

6

2

RXD+, Receive Data

7

3

TXD+, Transmit Data

8

4

RXD-, Receive Data

9

5

NA

Signal DSR, Data Set Ready RTS, Ready To Send CTS, Clear To Send
RI, Ring Indicator
Signal NA NA NA NA

2.3.1.3 RS-485 Mode

Signal

1

Data-

6

2

Data+

7

3

NA

8

4

NA

9

5

NA

Signal NA NA NA
NA

15

Chapter 2: Jumper & Connectors

CT-DBT0X l User’s Manual

2.3.1.4 COM1 RS-232/422/485 Mode Selection
To set the COM mode, boot the system into BIOS Setup Utility and select Advanced > F81866 Super IO configuration. You will see the following screen.

Select the COM port you wish to setup and choose from RS-232, RS-422 and RS-485.

If RS-485 is selected, you can enable/disable the RS-485 Auto Flow Function which automatically handles half-duplex control.

Save the configuration and exit the BIOS Setup Utility (“F4” hotkey).

2.3.2 VGA Connector

15-pin D-sub Female Connector

Signal

1

VGA_RED

9

2

VGA_GRN

10

3

VGA_BLU

11

4

NC

12

5

GND

13

6

GND

14

7

GND

15

8

GND

Signal VCC GND NC VGA_DDC_DAT VGA_HSYNC VGA_VSYNC
VGA_DCC_CLK

16

Chapter 2: Jumper & Connectors
2.3.3 USB 3.0 Connector

Signal

1

USB +5V

5

2

USB_D-

6

3

USB_D+

7

8

4

GND

9

Signal USB_SSRXUSB_SSRX+ GND_DRAIN USB_SSTXUSB_SSTX+

2.3.4 USB 2.0 Connector

Signal

1

USB +5V

2

USB_D-

3

USB_D+

4

GND

1 23 4

2.3.5 HDMI Connector

Signal

1

HDMI_TX2_DP_B

2

GND

3

HDMI_TX2_DN_B

4

HDMI_TX1_DP_B

5

GND

6

HDMI_TX1_DN_B

7

HDMI_TX0_DP_B

8

GND

9

HDMI_TX0_DN_B

10

HDMI_CLK_DP_B

11

GND

12

HDMI_CLK_DN_B

13

NC

14

NC

15

HDMI_SCLDDC_B

16

HDMI_SDADDC_B

17

GND

18

+5V

2.3.6 LAN Connector

Signal

1

MDI0+

2

MDI0-

3

MDI1+

4

MDI2+

A

Active LED (Yellow)

Signal

5

MDI2-

6

MDI1-

7

MDI3+

8

MDI3-

10 LAN LED (OFF)

B

100 LAN LED (Green)

1000 LAN LED (Orange)

CT-DBT0X l User’s Manual

19

1

18

2

17

Chapter 2: Jumper & Connectors
2.4 Internal Connectors
2.4.1 Front Panel Audio Connector (AUDIO)

Connector Type: 2×6-pin pitch 2.00mm wafer connector

Signal

1

MICIN_L

2

MICIN_R

3

MIC1_JD

4

5

LOUT_L

6

7

FRONT_JD

8

9

LIN_L

10

11

LINE1_JD

12

AGND LOUT_R AGND LIN_R AGND

2.4.2 Backlight Control Connector (CN1)

Connector Type: 2×6-pin pitch 2.00mm wafer connector

Signal

1

Backlight Enable

5

GND

2

Backlight CTRL

6

GND

3

Backlight PWR

7

NC

4

Backlight PWR

8

NC

2.4.3 COM2-4 Serial Ports (COM2-4)

Connector Type: 1×9-pin pitch 1.5mm wafer connector

Signal

1 DCD, Data Carrier Detect

2 RXD, Receive Data

3 TXD, Transmit Data

4 DTR, Data Terminal Ready

5 GND

6 DSR, Data Set Ready

7 RTS, Request To Send

8 CTS, Clear To Send

9 RI, Ring Indicator

CT-DBT0X l User’s Manual

1

8

1

9

18

Chapter 2: Jumper & Connectors
2.4.4 LPC Connector (DBG)

Connector Type: 2×5 pin pitch 1.27mm box header

Signal

1

GND

2

+3.3V

3

LPC_AD3

4

NC

5

LPC_AD2

6

RESET_DBG

7

LPC_AD1

8

CLOCK_DEBUG

9

LPC_AD0

10

LPC_FRAME

2.4.5 Fan Connector (FAN)

Connector Type: 1×4 pin pitch 2.54mm wafer connector

Signal

1

GND

2

+12V Fan Power

3

Fan Sensor

4

Fan PWM

2.4.6 GPIO Connector: GPIO

Connector Type: 2×5-pin pitch 2.0mm wafer connector

Signal

1

+5V

2

GND

3

GPO0

4

GPI0

5

GPO1

6

GPI1

7

GPO2

8

GPI2

9

GPO3

10

GPI3

2.4.7 Power Button Pin Header (JP3)
Connector Type: 1×2-pin pitch 2.00mm wafer connector

Signal

1

PS_ON_BUTTON_N

2

GND

CT-DBT0X l User’s Manual

19

Chapter 2: Jumper & Connectors
2.4.8 Reset Button Pin Header (JP4)

Connector Type: 1×2-pin pitch 2.00mm wafer connector

Signal

1

RESET_BUTTON_N

2

GND

2.4.9 Battery Pin Header (JP6)

Connector Type: 1×2-pin pitch 1.25mm wafer connector

Signal

1

GND

2

+3V

2.4.10 I2C Pin Header (I2C1)

Connector Type: 1×3-pin pitch 2.54mm pin header connector

Signal

1

CLOCK

2

GND

3

DATA

2.4.11 Multi-LED Pin Header (LED)

Connector Type: 2×6-pin pitch 2.00mm wafer connector

Signal

1 +5V

3 Power ON/OFF

5 +3.3V

7 LAN1 LINK/ACTIVE

9 +3.3V

11 LAN2 LINK/ACTIVE

Signal

2 +5V

4 HDD LINK/ACTIVE

6 LAN1 Speed 1000

8 LAN1 Speed 100

10 LAN2 Speed 1000

12 LAN2 Speed 100

CT-DBT0X l User’s Manual

20

Chapter 2: Jumper & Connectors
2.4.12 LVDS Connector: LVDS

Connector Type: 2×15-pin pitch1.25mm LVDS connector

Signal

1 LVDS_B3-

2 LVDS_B3+

3 LVDS_B_CLK5 LVDS_B27 LVDS_B19 LVDS_B011 LVDS_I2C_DAT 13 GND 15 GND 17 LVDS_A3+ 19 LVDS_A_CLK+ 21 LVDS_A2+ 23 LVDS_A1+ 25 LVDS_A0+ 27 Panel PWR 29 Panel PWR

4 LVDS_B_CLK+ 6 LVDS_B2+ 8 LVDS_B1+ 10 LVDS_B0+ 12 LVDS_I2C_CK 14 GND 16 GND 18 LVDS_A320 LVDS_A_CLK22 LVDS_A224 LVDS_A126 LVDS_A028 Panel PWR 30 Panel PWR

2.4.13 microSD Connector (MICRO_SD)

Signal

1

DAT2

2

CD/DAT3

3

CMD

4

VDD

5

CLK

6

VSS

7

DAT0

8

DAT1

CT-DBT0X l User’s Manual

21

Chapter 2: Jumper & Connectors
2.4.14 Mini-PCIe Slot #1 (PCIE1_MSATA)

PCIe x1 only (CT-DBT01 BOM option)

Definition

1 WAKE#

2 +3.3V

3 Reserved

4 GND

5 Reserved

6 +1.5V

7 CLKREQ#

8 UIM_PWR

9 GND

10 UIM_DATA

11 REFCLK-

12 UIM_CLK

13 REFCLK+

14 UIM_RESET

15 GND

16 UIM_VPP

17 Reserved

18 GND

Definition

19 Reserved

20 Reserved

21 GND

22 PERST#

23 PERn0

24 +3.3Vaux

25 PERp0

26 GND

27 GND

28 +1.5V

29 GND

30 SMB_CLK

31 PETn0

32 SMB_DATA

33 PETp0

34 GND

35 GND

36 USB_D-

mSATA only (CT-DBT02 BOM option)

Definition

1

NC

19

2

+3.3V

20

3

NC

21

4

DGND

22

5

NC

23

6

NC

24

7

NC

25

8

NC

26

9

DGND

27

10

NC

28

11

NC

29

12

NC

30

13

NC

31

14

NC

32

15

DGND

33

16

NC

34

17

NC

35

18

DGND

36

Definition NC NC
SATA GND NC
TXP (out) +3.3V
TXN (out) SATA GND SATA GND
NC SATA GND
NC RXN (in)
NC RXP (in) DGND SATA GND
NC

CT-DBT0X l User’s Manual

Definition

37 Reserved

38 USB_D+

39 Reserved

40 GND

41 Reserved

42 LED_WWAN#

43 Reserved

44 LED_WLAN#

45 Reserved

46 LED_WPAN#

47 Reserved

48 +1.5V

49 Reserved

50 GND

51 Reserved

52 +3.3V

Definition

37

SATA GND

38

NC

39

+3.3V

40

DGND

41

+3.3V

42

NC

43

NC

44

NC

45

NC

46

NC

47

NC

48

NC

49 DA/DSS (option)

50

DGND

51

GND

52

+3.3V

22

Chapter 2: Jumper & Connectors
2.4.15 Mini-PCIe Slot #2 (MINI_PCIE1)

PCIe x1 & USB 2.0

Definition

1 WAKE#

2 +3.3V

3 Reserved

4 GND

5 Reserved

6 +1.5V

7 CLKREQ#

8 UIM_PWR

9 GND

10 UIM_DATA

11 REFCLK-

12 UIM_CLK

13 REFCLK+

14 UIM_RESET

15 GND

16 UIM_VPP

17 Reserved

18 GND

Definition

19 Reserved

20 Reserved

21 GND

22 PERST#

23 PERn0

24 +3.3Vaux

25 PERp0

26 GND

27 GND

28 +1.5V

29 GND

30 SMB_CLK

31 PETn0

32 SMB_DATA

33 PETp0

34 GND

35 GND

36 USB_D-

CT-DBT0X l User’s Manual

Definition

37 Reserved

38 USB_D+

39 Reserved

40 GND

41 Reserved

42 LED_WWAN#

43 Reserved

44 LED_WLAN#

45 Reserved

46 LED_WPAN#

47 Reserved

48 +1.5V

49 Reserved

50 GND

51 Reserved

52 +3.3V

2.4.16 ATX Power Connector (POWER_CONN)

Connector Type: 1×4-pin pitch 3.96mm wafer connector

Signal

1

GND

3

+12V

2

GND

4

+12V

2.4.17 PS/2 Keyboard/Mouse Connector (PS2)

Connector Type: 1×6-pin pitch 2.0mm wafer connector

Signal

1 KB_DATA

3 +5V

5 MS_DATA

Signal

2 KB_CLK

4 GND

6 MS_CLK

23

Chapter 2: Jumper & Connectors
2.4.18 SATA Signal Connectors: SATA1-2

Connector Type: 1×4-pin pitch 3.96mm wafer connector

Signal

1 GND

2 SATA_TX+

3 SATA_TX-

4 GND

5 SATA_RX-

6 SATA_RX+

7 GND

2.4.19 SATA Power Connectors (SATA1/2_PWR)

Connector Type: 4-pin pitch 2.54mm connector

Signal

1 +5V

1

2 GND

3 GND

4 +12V

CT-DBT0X l User’s Manual

2.4.20 USB 2.0 Pin Header (USB_1/2)

Connector Type: 2×5-pin pitch 2.0mm wafer header connector

Signal

1 USB +5V

3 USB_D-

5 USB_D+

7 GND

9 KEY

Signal

2 USB +5V

4 USB_D-

6 USB_D+

8 GND

10 NC

24

Chapter 2: Jumper & Connectors

2.5 Jumper Settings
2.5.1 Backlight Power (JP1)

Function

Setting

+12V

1-2 closed

+5V (Default)

2-3 closed

2.5.2 Panel Power (JP2)

Function

Setting

+3.3V (Default)

1-2 closed

+5V

2-3 closed

2.5.3 Clear CMOS (JP8)

Function

Setting

Normal (Default)

1-2 closed

Clear CMOS

2-3 closed

Jumper Jumper Jumper

CT-DBT0X l User’s Manual

25

Chapter 3
Features & Interface

Chapter 3: Features & Interface

CT-DBT0X l User’s Manual

3.1 Processor
The cPCI-3620 Series supports the Intel® AtomTM processor E3800 Series which utilizes 22nm process technology with 3-D Tri-Gate transistors to deliver significant improvement in computational performance and energy-efficiency. Based on a new micro-architecture, the processor is designed for a one-chip platform. This system-on-chip (SoC) solution platform brings enhanced graphics, greater performance, lower cost, easier validation, and improved x-y footprint to a broad range of intelligent systems. The processor includes an Integrated Display Engine, Processor Graphics and Integrated Memory Controller.

3.2 BIOS
AMI uEFI BIOS on 8MB SPI Flash ROM is used on the CT-DBT0x.

3.3 System Memory
The Integrated Memory Controller (IMC) of the processor supports single channel, non-ECC, unbuffered DDR3L-1333 memory up to 4 GB with data transfer rates up to 1333MT/s.

3.4 Graphics
The graphics is integrated in the processor and based on Intel® HD Graphics 4000 technology, enabling
substantial gains in performance and lower power consumption.
· DirectX 11 support · OpenGL 4.0 support · Graphics Base Frequency: 542 MHz · Graphics Max Dynamic Frequency: 792 MHz · Full HD video playback · Maximum resolution of 2560×1600@60Hz

LVDS support is provided by a Realtek RTD2136R-CG DP-to-LVDS converter with dual channel 24-bit output up to 1920×1200 resolution.

3.5 USB
The CT-DBT0x supports 1x USB 3.0 and 1x USB 2.0 external ports, and 4x internal USB 2.0 ports.

3.6 Ethernet
The CT-DBT0x features 1x 10/100/1000BASE-TX Ethernet by Intel I210IT GbE Controller supporting WOL/PXE.

3.7 SATA
The CT-DBT0x supports 2x SATA 3Gb/s ports.
3.8 Audio
The CT-DBT0x supports HD audio via Realtek ALC886 codec.

27

Chapter 3: Features & Interface
3.9 Expansion
The CT-DBT0x provides the following expansion interfaces. · 2x Mini-PCle slots – Mini PCIe slot #1: PCIe x1 only or mSATA only – Mini PCIe slot #2: PCIe x1 & USB 2.0 · 1x microSD card slot · 1x SIM card slot

CT-DBT0X l User’s Manual

3.10 General Purpose Input Output
GPI and GPO pins may be implemented as GPIO. GPI and GPO pins may be implemented as SDIO.

Signal GPO[0:3] GPI[0:3]

I/O Description

O

General purpose output pins. Upon a hardware reset, these outputs should be low.

I General purpose input pins. Pulled high internally on the Module.

3.10.1 GPIO Configuration

Board Design

Pin#

GPIO#

1

2

3

DIO_PH_OUT0

4

DIO_PH_IN0

5

DIO_PH_OUT1

6

DIO_PH_IN1

7

DIO_PH_OUT2

8

DIO_PH_IN2

9

DIO_PH_OUT3

10

DIO_PH_IN3

Notes: 1. Output pin default setting is “HIGH”

Default Configuration VCC3 GND GPO0 GPI0 GPO1 GPI1 GPO2 GPI2 GPO3 GPI3

The GPIO function is provided by a Fintek F81866 AD-I, and it can be accessed through its GPIO index/data port. The index port is the base address +0 and the data port is the base address +1. To access the GPIO register, write index to the index port, and then read/write from/to data port. The configuration on the CT-DBT0x is described as below.

Index Port Data Port

0xA00 0xA01

28

Chapter 3: Features & Interface
Registers Description GPIO Input / Output Select
GPIO8x Configuration Registers (Index port=0xA00, Data port=0xA01, Offset=0x88)

CT-DBT0X l User’s Manual

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

GPO3

GPO2

GPO1

GPO0

GPI3

GPI2

GPI1

GPI0

Note. Bit X = 0 means Input Mode Bit X = 1 means Output Mode
GPIO Output Data Select
GPIO Output Data Register (Index port=0xA00, Data port=0xA01, Offset=0x89)

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

GPO3

GPO2

GPO1

GPO0

GPI3

GPI2

GPI1

GPI0

Note. Bit X = 0 outputs 0 when in output mode Bit X = 1 outputs 1 when in output mode

3.11 Watchdog Timer
3.11.1 Board Design
The Watchdog Timer (WDT) is implemented by Fintek F81866AD-I.

Register

Address

WDT Base Address

0xA10

3.11.2 Psuedo Code
Set WDT Time Unit (Second Unit)

Step1: ByteData = ReadIOByte(0xA15) Step2: ByteData = ByteData & 0xF7 Step3: WriteIOByte(0xA15, ByteData)

//Read current setting //Set time unit to “second” //Write back

Set WDT Timer Value
Step1: WriteIOByte(0xA16, Time)

//Set watch dog time value

Enable WDT
Step1: ByteData = ReadIOByte(0xA15) Step2: ByteData = ByteData | 0x20 Step3: WriteIOByte(0xA15, ByteData)

//Read current setting //Enable WDT //Write back

29

Chapter 4
Driver Installation

Chapter 4: Driver Installation

CT-DBT0X l User’s Manual

The drivers for the CT-DBT0x can be found on the driver DVD included with the system.

Install the following drivers in the order listed.

1. Chipset 2. Graphics 3. Audio 4. LAN 5. USB 3.0 6. Intel Serial IO 7. Intel Sideband Fabric Device (Intel MBI) 8. Intel Trusted Execution Engine (Intel TXE)

31

Chapter 5
System BIOS

Chapter 5: System BIOS

CT-DBT0X l User’s Manual

The BIOS provides an interface to modify the configuration. When the battery is removed, all the parameters will be reset.

Turn on the computer and press ~~or to enter the setup screens.~~

System Date: MM/DD/YYYY System Time: HH:MM:SS Use Tab to switch between Date and Time elements.
5.1 Advanced

33

Chapter 5: System BIOS
5.1.1 ACPI Settings

CT-DBT0X l User’s Manual

Enable ACPI Auto Configuration: Enables or disables BIOS ACPI Auto Configuration. Enable Hibernation: Enable or Disable system ability to Hibernate. ACPI Sleep state: Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed. Options: Suspend Disable, S3 (Suspend to RAM).
5.1.2 F81866 Super IO Configuration
Enable/disable and configure the serial ports.

34

Chapter 5: System BIOS 5.1.2.1 Serial Port 1 Configuration

CT-DBT0X l User’s Manual

Device Type Select: Choose from RS-232, RS-422 and RS-485.
5.1.2.2 Serial Port 2-4 Configuration

35

Chapter 5: System BIOS
5.1.3 Hardware Monitor

CT-DBT0X l User’s Manual

5.1.4 Serial Port Console Redirection
Serial port console redirection settings.

36

Chapter 5: System BIOS
5.1.5 CPU Configuration

CT-DBT0X l User’s Manual

Intel Virtualization Technology: When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology Power Technology: Configure the power management features.

37

Chapter 5: System BIOS

CT-DBT0X l User’s Manual

5.1.6 SATA Configuration
The BIOS automatically detects the presence of SATA device and the hardware installed in the SATA ports will be showed in the configuration. Each port can be enabled or disabled individually.

SATA Speed Support: Options: Gen 1, Gen 2. SATA Mode: Select IDE or AHCI Mode
5.1.7 Miscellaneous Configuration

OS Selection: Select the OS. 38

Chapter 5: System BIOS
5.1.8 LPSS & SCC Configuration

CT-DBT0X l User’s Manual

SCC SD Card Support: Options: Disable, Enable. LPSS I2C #2 Support: Options: Disable, Enable.
5.1.9 Network Stack Configuration

39

Chapter 5: System BIOS
5.1.10 CSM Configuration

CT-DBT0X l User’s Manual

GateA20 Active: [Upon Request] GA20 can be disabled using BIOS services. [Always] do not allow disabling GA20; this option is useful when any RT code is executed above 1MB.
Option ROM Message: Set display mode [Force BIOS] or [Keep Current] for Option ROM. INT19 Trap Response: BIOS reaction on INT19 trapping by Option ROM: IMMEDIATE execute the trap right away; POSTPONED execute the traps during legacy boot. Boot option filter: This option controls what devices system can boot to [UEFI and Legacy], [Legacy only] or [UEFI only]. Option ROM Execution Order: Controls the execution Option ROM, [Do not launch], [UEFI only] or [Legacy only].
40

Chapter 5: System BIOS
5.1.11 SDIO Configuration

CT-DBT0X l User’s Manual

SDIO Access Mode: Auto Option: Access SD device in DMA mode if controller supports it, otherwise in PIO mode. DMA Option: Access SD device in DMA mode. PIO Option: Access SD device in PIO mode.
41

Chapter 5: System BIOS
5.1.12 USB Configuration

CT-DBT0X l User’s Manual

Legacy USB Support: Auto option disables legacy support if no USB devices are connected. Disable option will keep USB devices available only for EFI applications. XHCI Hand-off: This is a workaround for OSes without XHCI hand- off support. The XHCI ownership change should be claimed by XHCI driver. EHCI Hand-off: This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. USB Mass Storage Driver Support: Enable/Disable USB Mass Storage Driver Support. USB transfer time-out: The time-out value for Control, Bulk, and Interrupt transfers. Device reset time-out: USB mass storage device Start Unit command time-out. Device power-up delay: Maximum time the device will take before it properly reports itself to the Host Controller. “Auto” uses default value: for a Root port it is 100ms, for a Hub port the delay is taken from Hub descriptor.
42

Chapter 5: System BIOS
5.1.13 Security Configuration

CT-DBT0X l User’s Manual

XE EOP Message: Send EOP Message Before Enter OS. Intel® AT: Enable/Disable BIOS AT Code from Running. Intel® AT Platform PBA: Enable/Disable BIOS AT Code from Running.

43

Chapter 5: System BIOS
5.2 Chipset

CT-DBT0X l User’s Manual

5.2.1 Northbridge Configuration

44

Chapter 5: System BIOS 5.2.1.1 Intel IGD Configuration

CT-DBT0X l User’s Manual

IGD Turbo Enable: Enable/Disable: IGD Turbo. GFX Boost: Enable/Disable GFX Boost. PAVC: Enable/Disable Protected Audio Video Control. DVMT Pre-Allocated: Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Devi ce. DVMT Total Gfx Mem: Select DVMT 5.0 Total Graphics Memory size used by the Internal Graphics Device. Aperture Size: Select the Aperture Size.

45

Chapter 5: System BIOS 5.2.1.2 LCD Control

CT-DBT0X l User’s Manual

Primary IGFX Boot Display: Default setting is “VBIOS Default”. “CRT”selects VGA, “EFP” selects DisplayPort, “LFP” selects LVDS. LCD Panel Type: Default setting is “1024×768 LVDS 24-bit”.
46

Chapter 5: System BIOS
5.2.2 Southbridge Configuration

CT-DBT0X l User’s Manual

High Precision Timer: Enable or Disable the High Precision Event Timer. Restore AC Power Loss: Select AC power state when power is re-applied after a power failure.
5.2.2.1 USB Configuration

47

Chapter 5: System BIOS 5.2.2.2 PCI Express Configuration

CT-DBT0X l User’s Manual

5.3 Security
Administrator’s and User’s passwords could be set. If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup, the user will have administrator rights. The minimum length of
the password is 3 and the maximum length is 20.

48

Chapter 5: System BIOS
5.3.1 Security Boot Menu

CT-DBT0X l User’s Manual

Secure Boot: Secure Boot can be enabled if the System running in User mode with enrolled Platform Key (PK) and CSM function is disabled. Secure Boot Mode: Secure Boot mode selector. `Custom’ Mode enables users to change Image Execution policy and manage Secure Boot Keys.

49

Chapter 5: System BIOS
5.4 Boot

CT-DBT0X l User’s Manual

Setup Prompt Timeout: Number of seconds to wait for setup activation key. 65535 (0xFFFF) means indefinite waiting. Bootup NumLock State: Select [Enable] or [Disable] for the keyboard NumLock state. Quiet Boot: Enables or Disables Quiet Boot option. Boot Order Priorities: Set system boot order. Hard Drive BBS Priorities: Set the order of the legacy devices in this group.
5.5 Save and Exit

50

Chapter 6
Address Map

Chapter 6: Address Map

CT-DBT0X l User’s Manual

6.1 I/O Port Address Map
The assignments of the I/O port addresses for the CT-DBT0x under Windows® 7 Ultimate 64-bit are shown below.

52

Chapter 6: Address Map
I/O Port Address Map (cont’d)

CT-DBT0X l User’s Manual

53

Chapter 6: Address Map
I/O Port Address Map (cont’d)

CT-DBT0X l User’s Manual

54