ZEBRA MN-005018-01EN Smart Card CAC Reader Instruction Manual
- September 12, 2024
- ZEBRA
Table of Contents
ZEBRA MN-005018-01EN Smart Card CAC Reader
Specifications:
- Model : ET6x Smart Card/CAC Reader
- Regulatory Compliance : EU Directives 2014/30/EU, 2014/35/EU, 2011/65/EU; FCC Part 15
- Environmental Compliance : WEEE, Recycling information available at zebra.com/environment
- Warranty : Visit zebra.com/warranty for details
Product Usage Instructions
-
Regulatory Information:
Ensure that the device is used in compliance with all relevant regulations and directives mentioned in the user manual. -
Environmental Compliance:
For proper disposal of the product at the end of its life, refer to recycling/disposal advice at zebra.com/weee. -
Service Information:
Before using the unit, configure it to operate in your facility’s network. Contact your facility’s Technical or system support for assistance with any operational or equipment-related issues. For the latest guide version, visit zebra.com/support. -
Software Support:
For software-related queries or support, refer to the product support information provided. Visit ip.zebra.com to view Zebra patents.
Regulatory Information
- This device is approved under Zebra Technologies Corporation.
- This guide applies to the following model number: XBK-ET6X-SMCARD
- All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required.
- Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment.
- Declared maximum operating temperature: 60°C
- For use only with Zebra approved and UL Listed mobile devices, Zebra approved, and UL Listed/Recognized battery packs.
Regulatory Markings
Regulatory markings subject to certification are applied to the device. Refer
to the Declaration of Conformity (DoC) for details of other country markings.
The DOC is available at: zebra.com/doc.
Marking and European Economic Area (EEA)
-
Statement of Compliance
Zebra hereby declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at zebra.com/doc. -
Environmental Compliance
For compliance declarations, recycling information, and materials used for products and packaging please visit zebra.com/environment. -
EU Importer: Zebra Technologies B.V
- Address : Mercurius 12, 8448 GX Heerenveen, Netherlands
-
Waste Electrical and Electronic Equipment (WEEE)
For EU and UK Customers: For products at the end of their life, please refer to recycling/disposal advice at zebra.com/weee.
United States and Canada Regulatory
Radio Frequency Interference Notices
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference Requirements – Canada
Innovation, Science and Economic Development Canada ICES-003 Compliance Label:
CAN ICES-003(B)/NMB-003(B)
United Kingdom
Statement of Compliance
Zebra hereby declares that this device is in compliance with the
Electromagnetic Compatibility Regulations 2016, the Electrical Equipment
(Safety) Regulations 2016 and the Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012.
The full text of the UK Declaration of Conformity is available at : zebra.com/doc.
- UK Importer: Zebra Technologies Europe Limited
- Address : Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF
Warranty
For the complete Zebra hardware product warranty statement, go to: zebra.com/warranty.
Service Information
- Before you use the unit, it must be configured to operate in your facility’s network and run your applications.
- If you have a problem running your unit or using your equipment, contact your facility’s Technical or System Support. If there is a problem with the equipment, they will contact Zebra support at zebra.com/support.
- For the latest version of the guide go to: zebra.com/support.
Software Support
Zebra wants to ensure that customers have the latest entitled software at the
time of device purchase in order to keep the device operating at peak
performance levels. To confirm that your Zebra device has the latest entitled
software available at the time of purchase, go to
zebra.com/support. Check for the latest software
from Support > Products, or search for the device and select Support >
Software Downloads.
If your device does not have the latest entitled software as of your device
purchase date, e-mail Zebra at
entitlementservices@zebra.com and
ensure you include the following essential device information:
- Model number
- Serial number
- Proof of purchase
- Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the latest version of software, as of the date you purchased your device, you will receive an e-mail containing a link directing you to a Zebra Web site to download the appropriate software.
Product Support Information
- For information on using this product, see the User Guide at zebra.com/et60-info.
- To find quick answers to known product behaviors, access our knowledge articles at supportcommunity.zebra.com/s/knowledge-base.
- Ask your questions in our Support community at supportcommunity.zebra.com.
- Download product manuals, drivers, and software, and view how-to videos at zebra.com/support.
- To request a repair for your product, go to zebra.com/repair.
Patent Information
To view Zebra patents, go to ip.zebra.com.
FAQ
Q: Where can I find the full text of the EU Declaration of Conformity?
A: The full text of the EU Declaration of Conformity is available at
zebra.com/doc.
Q: What should I do if I encounter harmful interference while using the
device?
A: If the device causes harmful interference or experiences undesired
operation due to interference, refer to FCC Rules for guidance. Contact Zebra
support at zebra.com/support if needed.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>