MAXIM LIGHTING 14446 Franklin 6-Light Chandelier Instruction Manual
- June 8, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 14446 Franklin 6-Light Chandelier
Please consult a qualified electrician for hanging fixture and wiring.
Light Source: 6 X E12 Candelabra 60W (Not Included)
Made in China / Hecho en China / Fabrique en China
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Before getting, started, ensure the package i contains the following components:
Rotate arms ( H) according to the position of holes on the inner ring ( F) and secure with finial CG)
Attach appropriate amount of chain to loop to achieve desired mounting height.
Thread wire through every 3rd loop of chain.
Remove ring from loop and slide down chain.
Place canopy onto chain and let slide to top of fixture.
Install nipple and cross bar into top of chain loop
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>