MARVO M399 Honeycomb Lightweight Gaming Mouse User Guide
- June 9, 2024
- MARVO
Table of Contents
MARVO M399 Honeycomb Lightweight Gaming Mouse User Guide
PRODUCT PRESENTATION
FEATURES
- Ultra-lightweight, as low as 76 grams, thanks to special perforated- honeycomb chassis design.
- RGB backlight with multiple selectable lighting schemes
- Advanced customization software
SYSTEM REQUIREMENTS
PC system or compatible with the installed sound card, two USB ports
available; Windows 7 or newer operating system.
-
6400 DPI
Optical/Laser Sensor -
DPI SIEPS
800-1600-3200-4800-6400 -
3 Million
Switch Rating -
ERGO
Design -
DRIVER
Programmable
SAFETY NOTES
- Keep the equipment dry. Keep away from precipitation, humidity, all types of liquids and condensation.
- Do not use the product with wet hands.
- Do not use or store the equipment in dusty or dirty areas.
- Do not store the equipment under high-temperature or low-temperature conditions (this may damage it).
- Do not drop, knock or shake the equipment as it may damage it.
INSTALLATION
Connect the mouse to an available USB port on your computer. When connecting
for the first time, wait 15 seconds until the generic driver is installed.
NOTE: This mouse does not have a specialized driver and does not require one for proper operation and functionality.
For advanced mouse configuration, please C^Y.load and install the specialized driver at www.marvo-tech.hk I net connection is required):
- download the driver and double-click the
- follow the on-screen instructions and instil I
- after installing the application successfully a.1 II t)t: displayed in the taskbar;
- double-click this icon to launch the application.
USE
MOUSE
Press the buttons below the scroll wheel to change the sensitivity according
to predefined DPI steps.
Mouse Use
- Left button
- Right button
- Middle button
- Forward
- Backward 6:DPI Loop
MOUSE DRIVER USE
Key Setting
Select “Mode r or “Mode B” tab and set user-defined function of each key as
following graph. 1 for Left Click, 2 for Right Click, 3 for Mid click. 4 for
forward, 5 for backward,6 for DPI Loop is kept as default.
One click the key you want to set then chose a new functions. Click “Apply” to
save the setting.
Advanced Setting
I et “Advanced” tab and set Fire key Setting/Moving Speed/Double click
sLoond/Roffing speed/DPf setting functions as following graph. Click “Apply to
save the setting.
DPI Setting The default DPI: 800-1600-2400-3200-4800-6400, you can set the DPI
from 800-6400.
User define color
Double click the color I :: I noose the color you want. Click “Apply to save
the Setting.
Light Setting
Macro Setting
Macro management can record any keys of keyboard, the time of keys reaction
and the number of keys cycles.
Click “New macro” to create a new file, such as a, b, c Select whether to
increase the delay and the times of cycles.
Click ‘start recording” and start recording any keys of keyboard. The keys you
recorded will display in the macro edit box. After the recording, click “start
recording”. To relse. the fecraing content, please make the following changes
in the magi nptinnc. Chobir. to incArt tile event: insert relevant content in
the selected location.
After recording is completed, just exit the macro recording interface, no need
to click the confirmation keys. Execute a macro, such as the mouse button “4”
key set to “macro functions”, after recording is complete, press the mouse “4”
key to play the recorded content.
TROUBLESHOOTING
In case of incorrect operation follow the steps below:
- Check the integrity of the connectors;
- Check the connection to the computer
- Check your computer settings;
- Disconnect and reconnect the equipment: restart the computer. If the problem persists, please contact your local seller.
GENERAL INFORMATION
- Unauthorized repairs or disassembly of the product will void the warranty and may cause its damage.
- This product is safe and complies to EU requirements.
- This product is manufactured conforming with the European RoHS standard. This standard was introduced to reduce the amount of electrical and electronic waste emitted into the atmosphere.
- Using the WEEE symbol (the crossed-out bin) indicates that the electrical and electronic equipment inside the package can be recycled. When recycling waste properly, you protect the environment and people health. Segregated household waste collection, aids recycle materials and components used for the production of this device. For detailed information about recycling, please contact your retailer or a local authority.
Warranty Card
Warranty Card is the important certificate for after-sale service of Marvo products, please keep it safe.
Facebook
Scan Me
Wanna Know More?
Scan Me
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>