QFX PBX-8181 Portable Party Speaker with Bluetooth and Microphone User Manual
- June 6, 2024
- QFX
Table of Contents
QFX PBX-8181 Portable Party Speaker with Bluetooth and Microphone
REMOTE CONTROL
- Power button
- Play/ Pause
- EQ sound effect mode button
- USB/RADIO Numeric button ( pick the song/station program you want )
- Mode button(Press to enter into selection for Bluetooth, FM Radio,AUX Input,USB,TF)
- Mute button
- Previous
- Next
- Volume +/-
- Single Repeat(For USB/TF card playing mode)
- USB/SD(TF) button
FM FUNCTION
Lightly press MODE/LIGHT button to switch to FM mode. Press PLAY/PAUSE button on control panel for automatic searching and saving the radio stations, by pressing PREVIOUS or NEXT you can select a previous or next radio station. Press 0~9 from remote to choose the FM stored station.
Bluetooth:
Lightly press MODE/LIGHT button on control panel to select Bluetooth mode. Simultaneously open the Bluetooth setting on your phone, tablet or any other Bluetooth enabled audio device and select “QFX PBX-8181″(no need to match code),the unit and device will then connected via Bluetooth. Press the “NEXT SONG” and “PREVIOUS SONG” button on the control panel to select the song, press ” PLAY/PAUSE” button to control the playing status.
Control Panel Function
- MIC input
- Power/VOLUME -&+
- ECHO: Echo volume adjustment
- MIC.VOL:Microphone volume control
- DC interface (5V)
- Charging Indicator RED=Charging Ligth off= Fully Charged
- AUX input
- MODE/LIGHT(Long press to turn on/off light; Lightly press to enter into selection for Bluetooth,FM Radio,AUX Input,USB,TF)
- Next track
- Play/Pause&TWS (Wirless Bluetooth Connection: under bluetooth mode, press TWS button for around 3 seconds to pairing another TWS speaker; Under FM mode, lightly press Play/Pause&TWS to enter into automatic scan and all the scanned radio stations will be saved automatically.)
- Previous track
- TF/USB input
SPECIFICATIONS
- Power Output: 8W
- Frequency Response for main speaker: 38Hz-20KHz
- Power Supply: DC5V
POWER SOURCE
- Please charge the unit at least 4 hours before first time using.
- Twist the dial clockwise/anticlockwise to switch on/off the unit.
CHARGE THE BATTERY
When the battery is charging, the CHARGE STATUS lights shows on the LED display is red. After the battery has fully charged, the light turns to green.
- Connect the USB charge cable to the DC5V interface of the speaker firmly.
- When the battery is fully charged, please disconnect the USB charge cable from the speaker.
- The speaker works normally when charging.
POWER/VOLUME
Twist the dial clockwise/anticlockwise to increase/decrease the volume.
PREVIOUS/NEXT BUTTON
Under playing status, press PREVIOUS/NEXT button to get back to a previous or next song.
PAUSE/PLAY BUTTON
To stop playing the current track, please press PAUSE/PLAY button on the control panel. Press it once again to continue playing.
MODE/LIGHT
Long press to turn on/off light. Lightly press to enter into playing mode selection( Bluetooth, FM Radio, AUX Input, USB,TF).
AUX IN JACK
- Connect an audio cable to the AUX IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman, etc,then select LINE by pressing the MODE/LIGHT button on the control panel .
- Play from an external audio device.
MIC IN JACK
Plug in microphone directly for playing.
USB JACK
Insert USB card directly for playing.
TF JACK
Insert TF card directly for playing.
Single Repeat
When playing USB/TF card, press this button to repeat a single track. To
cancel the single repeat, press the button again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>