ZEBRA TC52x Mobile Computer User Guide
- October 27, 2023
- ZEBRA
Table of Contents
ZEBRA TC52x Mobile Computer
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to the following model numbers:
- CRD-TC5X-2SETH
- TRG-TC5X-ELEC1
All Zebra devices are designed to be compliant with the rules and regulations
in the locations they are sold and will be labeled as required.
Any changes or modifications to Zebra equipment not expressly approved by
Zebra could void the user’s authority to operate the equipment.
Declared maximum operating temperature: 40°C.
For use only with Zebra approved and UL Listed mobile devices, Zebra approved,
and UL Listed/Recognized battery packs.
Regulatory Markings
Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc.
Power Supply
This device may be powered by either an external power supply. Ensure the
applicable instructions are followed.
WARNING ELECTRICAL SHOCK : Use only a Zebra approved, Certified ITE
[SELV] power supply with appropriate electrical ratings. Use of alternative
power supply will invalidate any approvals given to this unit and may be
dangerous.
Connecting to a LAN Network
Please note that this device is not tested or authorized to be connected via
ethernet cable to a Local Area Network (LAN) in outdoors conditions. It may
only be connected to an indoor LAN.
Marking and European Economic Area (EEA)
Statement of Compliance Zebra hereby declares that this device is in
compliance with Directives 2014/30/EU, 2014/35/EU and 2011/65/EU. The full
text of the EU Declaration of Conformity is available at: zebra.com/doc. EU
Importer : Zebra Technologies B.V Address: Mercurius 12, 8448 GX Heerenveen,
Netherlands
Waste Electrical and Electronic Equipment (WEEE)
For EU Customers: For products at the end of their life, please refer to
recycling/disposal advice at: zebra.com/weee.
United States and Canada Regulatory
Radio Frequency Interference Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received
including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference Requirements Canada
Innovation, Science and Economic Development Canada ICES-003 Compliance Label:
CAN ICES-3 ([B])/NMB-3([B])
Brasil
Este equipamento não tem direito à proteção contra interferência prejudicial e
não pode causar interferência em sistemas devidamente autorizados.
United Kingdom
Statement of Compliance Zebra hereby declares that this device is in
compliance with Electromagnetic Compatibility Regulations 2016, the Electrical
Equipment (Safety) Regulations 2016 and the Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
The full text of the UK Declaration of Conformity is available at:
zebra.com/doc. UK Importer: Zebra Technologies Europe Limited Address: Dukes
Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF
Warranty
For the complete Zebra hardware product warranty statement, go to: zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s
network and run your applications. If you have a problem running your unit or
using your equipment, contact your facility’s Technical or System Support. If
there is a problem with the equipment, they will contact Zebra support at
zebra.com/support.
For the latest version of the guide go to:
zebra.com/support.
Zebra reserves the right to make changes to any product to improve
reliability, function, or design. Zebra does not assume any product liability
arising out of, or in connection with, the application or use of any product,
circuit, or application described herein. No license is granted, either
expressly or by implication, estoppel, or otherwise under any patent right or
patent, covering or relating to any combination, system, apparatus, machine,
material, method, or process in which the products might be used. An implied
license exists only for equipment, circuits, and subsystems contained in Zebra
products.
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2021 Zebra Technologies Corp. and/or its affiliates. All rights reserved.
References
- Zebra Technologies | Visible. Connected. Optimized.
- Support and Downloads | Zebra
- Product Warranty Information | Zebra
- Declarations of Conformity | Zebra Technologies
- Support and Downloads | Zebra
- Product Warranty Information | Zebra
- WEEE and EU Battery Directive FAQs | Zebra
- SYSTEM ERROR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>