ZEBRA TC21 Smart Phone User Guide

May 15, 2024
ZEBRA

ZEBRA TC21 Smart Phone

ZEBRA TC21 Smart Phone

TC21/TC26 Accessory Overview

Accessory Overview

  • Low-Cost Single Slot Charge Cradle

  • Low-Cost Single Slot Communication Cradle
    Accessory Overview

  • NEW: Workstation Connect Cradle

  • NEW: Wired USB-C headset For PTT and VOIP
    Accessory Overview

  • Multi-Slot Charge only Share Cradle
    Accessory Overview

  • Multi-Slot Ethernet Share Cradle
    Accessory Overview

  • Vehicle Holder
    Accessory Overview

  • 4-slot Battery Charger
    Accessory Overview

  • 20-slot Battery Charger
    Accessory Overview

  • Rugged Boot with integrated Hand Strap
    Accessory Overview

  • UHF RFID Sled
    Accessory Overview

  • RS5100 Ring Scanner

  • Arm Mount

  • NEW: Rotatable BOA arm/wrist mount
    Accessory Overview

  • Screen Protector

  • Hand Strap

  • Snap on Trigger Handle
    Accessory Overview

  • Batteries (3300 mAh, 5260 mAh)

  • USB Charge Cable
    Accessory Overview

Cradle System

1 & 5 Slot Charge Cradles

Accessory Overview

CRD-TC2Y-BS1CO-01
TC21/TC26 Single Slot Charge Only Cradle

CRD-TC2Y-BS5CO-01
CRD-TC2Y-BS54B-01
TC21/TC26 Multi-Slot Charge Only Share Cradle

  • Charges Trigger Handle and Terminal together

  • Multi-slot – 19” Rack: Rack Mountable (Mounting accessory required – BRKT-SCRD-SMRK-01)
    Accessory Overview

  • 5-slot available in 2 options;

  • 5 slot terminal only

  • 4 slot terminal plus 4 slot battery

  • Single Slot Base Cradle requires USB-C Cable (CBLTC5X-USBC2A-01, PS: PWR-WUA5V12W0XX (US, EU, GB, AU, CN, BR, KR, IN)

  • 5-Slot Cradles requires power supply PWRBGA12V108W0WW, DC Line Cord CBL-DC-381A1- 01 & country specific AC Line Cord (sold separately)

1 & 5-Slot Communication Cradles

Accessory Overview

CRD-TC2Y-SE1ET-01 TC21/TC26 Single Slot
Charge/Communication Cradle

CRD-TC2Y-SE5ET-01 TC21/TC26 5-Slot Ethernet & Charge
Share Cradle

  • Charge Trigger Handle and Terminal Together

  • Multi-slot 19-inch Rack Mountable (Mounting accessory required – BRKT-SCRD-SMRK-01)

  • NOTE: Single Slot Communication Cradle to utilize Ethernet requires MOD-MT2-EU1-01 or to utilize USB requires USB cable 25-124330-01R. (Both Sold Separately)

  • Single Slot Charge and Ethernet Communication Cradle requires power supply PWR-BGA12V50W0WW & CBLDC-388A1-01 & country specific AC Line Cord (sold separately)

  • 5-Slot Cradles requires power supply PWRBGA12V108W0WW, DC Line Cord CBL-DC-381A1-01 & country specific AC Line Cord (sold separately)

Workstation Connect Cradle System

Workstation Connect Cradle

Accessory Overview

CRD-TC2X-1SNWS-01
TC21/TC26 Workstation Connect Cradle

  • Connect Cradle allows for the TC21/TC26 mobile computer to connect to multiple peripherals and enable Zebra Workstation Connect on an external monitor
    Workstation Connect Cradle System

  • Cradle includes following connectivity ports: HDMI, Ethernet, 3.5mm Headset Jack and USB-A (x4) (cables not included)

  • Requires power supply PWR BGA12V50W0WW, DC Line Cord CBL-DC388A2-01 and country specific grounded AC Line Cord (sold separately)

Power Supply & Cables

Power Supply for Connect Cradle : 100-240 VAC, 12VDC, 4.16A.
(PN: PWR-BGA12V50W0WW)

Requires: Country specific AC grounded line cord.

DC Line Cord for powering Connect Cradle from PWR-BGA12V50W0WW. (12 VDC, 4.16A) 1.8m length. (PN: CBL-DC-388A2-01)

Notes:

  1. Workstation Connect cradle accommodates devices with or without the rugged boot, hand straps, and both standard or extended capacity batteries.
  2. Connect cradles can we secured to a desk or tabletop via standard M5 screws.
  3. Connect cradles are compatible with healthcare configurations (TC21-HC, TC26-HC).

Batteries And Chargers

4-Slot Battery Charger

Batteries and Chargers

AC-TC2Y-4SCHG-01
SAC-TC2Y-20SCH-01
TC21/TC26 4-slot Battery Charger

  • Charges 1X or 2X Batteries; can mix & match battery per slot

  • 4-Slot requires power supply PWR-BGA12V50W0WW; DC Line Cord CBL-DC-388A1-01 & country specific AC Line Cord (sold separately)

  • 20-slot required power supply PWR-BGA12V108W0WW; DC Line Cord CBL-DC-381A1-01 & country specific AC Line Cord (sold separately)

  • 20-slot Rack Mountable (requires BRKT-SCRD-SMRK-01 sold separately)

1X and 2X Batteries

Batteries and Chargers

BTRY-TC2Y-1XMA1-01
BTRY-TC2Y-2XMA1-01

Basic 1X Battery 3300 mAh
Extended 2X Battery 5260 mAh

  • Basic Battery 3300 mAh
  • Extended Battery 5260 mAh
  • Country Specific Batteries available: “-BR” Brazil, “-IA” India
  • Both compatible with battery charger SAC-TC2Y-4SCHG-01

Data Capture

Trigger Handle

TRG-TC2Y-S NP1-01
TC21/TC26 Snap-On Trigger Handle

Transforms device into all-touch handle style terminal for use in interim high volume scanning operations

Accessory Overview

  • Easily attaches to TC21/TC26 top housing

  • Exposed Contacts provide ability to charge with the 5- Slot & Single Slot Cradles

  • Optional Wrist Tether (sold separately) 50-12500-066

  • The Trigger Handle is only available to be used on the TC21 and TC26 devices equipped with the 2-pin rear I/O connector.

  • Does not block rear camera

Screen Protector

SG-TC2Y-SCRNPT1-01
TC21/TC26 Tempered Glass Screen Protector

  • Protects Display on TC21 & TC26
  • Single Protector to a Package

Trigger Handle Service Plan

The TC2X trigger accessory provides users with significant flexibility as they adapt the TC2X device to different operations within their retail environment. The TC2X trigger accessory is considered a consumable item which may need to be replaced during the life of a TC2X. Therefore, Zebra highly recommends the purchase of a Zebra trigger handle service plan.

OPT-TRGMNT-2 2-Year Zebra OneCare Comprehensive Trigger Maintenance
OPT-TRGMNT-3 3-Year Zebra OneCare Comprehensive Trigger Maintenance

Soft Goods

Soft Holsters

SG-TC2Y-HLSTR1-01
TC21/TC26 Soft Holster

  • TC2X Open Bucket design to accommodate hand strap + Snap-on’s for easy insertion/removal
  • Opening for audio & drainage
  • Non-rotating clip
  • Adjustable belt to fit the TC21/TC26 with Basic or Extended Battery
    Soft Goods

Hand Strap

SG-TC2Y-HSTRP1-01
TC21/TC26 Hand Strap

  • Plastic clip that snap into towel bar for easy insertion/removal
  • Leather and Hypalon Pad for maximum comfort & wear resistance with Adjustable Velcro design
    Soft Goods

Arm Mount

SG-TC2Y-ARMNT-01
TC21/TC26 Arm Mount

  • Enables the TC21/TC26 to be mounted to the arm for hands free operation
  • Scan with the hands free RS5100 Bluetooth Ring Scanner
    Soft Goods

Rugged Boot

SG-TC2Y-BOOT-01
TC21/TC26 Rugged Boot with integrated Hand Strap

  • Increases drop rating of device to 5 feet / 1.5 meters
  • Two-part design with top and bottom parts connected with a fixed, integrated hand strap
  • Bottom part can be removed to allow docking device into Share Cradle
    Soft Goods

NEW: Arm/Wrist Mount

SG-TC2Y-WMADP1-01 (small strap) & SG-TC2Y-WMADP1-02 (long strap)

TC21/TC26 rotatable BOA arm/wrist mount with adjustable Dial Strap NEW: Arm/Wrist Mount

  • 360 rotatable mounting solution for portrait and landscape mode viewing
  • USB-C opening at the bottom for communication or charging solutions through USB-C cables
  • Strap length can be adjusted between 128 to 191 mm (approx. 5.0 to 7.5’’) or 164 to 265 mm (approx. 6.5 to 10.5’’)
  • Not compatible with TC21/26 config with rugged booth SKU SG-TC2YBOOT-01
    Soft Goods

Audio And Vehicle Accessories

In-Vehicle Holder

Audio and Vehicle Accessories

CRD-TC2Y-VCH1-01
TC21/TC26 In-Vehicle Holder

  • Suction Cup for Easy Window or Dashboard Mount
  • Supports device with 1X or 2X Batteries
  • USB-C jack accessible
  • Does Not support Snap-On Accessories
  • Work with USB Cigarette Lighter Adapter (CHG-AUTOUSB1-01) – sold separately

Headset

HDST-USBC-PTT1-01

Over-the-ear USB-C wired for PTT + VoIP w/ rotating earpiece for wearing on right/left ear. Includes built-in PTT button and volume control.

Audio and Vehicle Accessories

Bluetooth Headset

HS3100-OTH
HS3100 Rugged Bluetooth Headset Over-The Head Headband includes HS3100 Boom Module and HSX100 OTH Headband Module

Chargers And Cables

USB-C Cable

CBL-TC5X-USBC2A-01
TC21/TC26 USB-C Cable to be used for charging and communications
Chargers and Cables

Wall Charger – Power Supply

PWR-WUA5V12W0XX
Power Supply-100-240 VAC, 5 V, 2.5 A with country specific plugs.

Chargers and Cables

Country Power Supply Part Number
United States PWR-WUA5V12W0US
Great Britain PWR-WUA5V12W0GB
Europe PWR-WUA5V12W0EU
Australia PWR-WUA5V12W0AU
China PWR-WUA5V12W0CN
Argentina PWR-WUS5V12W0AR
Brazil PWR-WUA5V12W0BR
Korea PWR-WUA5V12W0KR
India PWR-WUA5V12W0IN

RFID Accessories

RFD40 UHF RFID Sled

  • RFD40 RFID Sled See table for part numbers
    RFID Accessories

  • TC21/26 Sled Adaptor ADP-RFD40-TC2X-1E
    RFID Accessories

RFD4030-G00B700-XX
RFD40 UHF RFID Standard Sled

  • Supports Zebra eConnex™ (must be used with devices equipped with 8-pin rear connector only)
  • Supports device with 1X or 2X batteries
  • Requires TC21/26 Sled Adaptor (ADP-RFD40-TC2X-1E)

RFID Single-Slot Cradles

RFID Accessories

CRD1S0T-RFD40-TC2X-CHG-1R

1-slot Charge Only Cradle

CRD1S0T-RFD40-TC2X-COM-1R

1-slot Micro USB & Charge Cradle

  • 3 x sled/terminal slots and 4 x RFD40 spare battery slots
  • Requires power supply PWR-BGA12V108W0WW, DC Line Cord CBL-DC-381A1-01 & country specific AC Line Cord (sold separately)

RFD40 Part Numbers – Country Specific

Country / Region

|

Three Wire AC Line Cord

---|---
US, Canada, Puerto Rico (TAA Compliant)| RFD4030-G00B700-US
Worldwide 900MHz| RFD4030-G00B700-WR
EMEA 800MHz| RFD4030-G00B700-E8
Israel| RFD4030-G00B700-IL
India| RFD4030-G00B700-IN
Japan| RFD4030-G00B700-JP
Sri Lanka| RFD4030-G00B700-SL
Thailand| RFD4030-G00B700-TH
Tunisia| RFD4030-G00B700-TN

AC Line Cords – Country Specific

Country

|

Three Wire AC Line Cord

---|---
Abu Dhabi| 50-16000-220R: 1.8M long, CEE 7/7 plug
Australia| 50-16000-217R: 1.9M long, AS 3112 plug
Bolivia| 50-16000-220R: 1.8M long, CEE 7/7 plug
Brazil| 50-16000-727R: 18AWG, 250V, 16A, BR (3w)
China| 50-16000-217R: 1.9M long, AS 3112 plug
50-16000-257R: 1.8M long, IEC 60320 C13 plug
Dubai| 50-16000-220R: 1.8M long, CEE 7/7 plug
Egypt| 50-16000-220R: 1.8M long, CEE 7/7 plug
Europe| 50-16000-220R: 1.8M long, CEE 7/7 plug
Hong Kong| 50-16000-219R: 1.8M long, BS1363 plug
India| 50-16000-669R: 1.9M long, BS 546 plug
Iran| 50-16000-220R: 1.8M long, CEE 7/7 plug
Israel| 50-16000-672R: 1.9M long, S132 plug
---|---
Italy/Chile| 50-16000-671R: 1.8M long, CIE 23-16 plug
Japan| 50-16000-218R: 1.8M long, NEMA 1-15P plug
Korea| 50-16000-220R: 1.8M long, CEE 7/7 plug
50-16000-256R: 1.8M long, CEE7/7 plug
Malaysia| 50-16000-219R: 1.8M long, BS1363 plug
New Guinea| 50-16000-217R: 1.9M long, AS 3112 plug
Russia| 50-16000-220R: 1.8M long, CEE 7/7 plug
Singapore| 50-16000-219R: 1.8M long, BS1363 plug
UK| 50-16000-219R: 1.8M long, BS1363 plug
US| 23844-00-00R: 7.5 feet long 50-16000-221R: 1.8M long, USA NEMA 5-15P
Vietnam| 50-16000-220R: 1.8M long, CEE 7/7 plug

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2023 Zebra Technologies Corp. and/or its affiliates. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals