DONGGUAN B010 Smart Dressing Table With Wireless Charging Station Installation Guide

DONGGUAN B010 Smart Dressing Table With Wireless Charging Station

Product Specifications

• Compliance: Part 15 of FCC Rules
• Bluetooth: FCC radiation exposure limits
• Wireless Charger: FCC RF Exposure requirements

Product Usage Instructions

FCC Warning
This device complies with part 15 of the FCC Rules. It must not cause harmful interference and must accept any interference received. Any changes or modifications not approved by the responsible party could void the user’s authority to operate the equipment.

For optimal performance, consider the following:

• Reorient or relocate the receiving antenna if needed.
• Increase the separation between equipment and receiver.
• Connect the equipment to a different circuit than the receiver.
• Consult a dealer or technician for assistance.

Bluetooth Usage
Ensure a minimum distance of 20cm between the Bluetooth device and your body for compliance with FCC radiation exposure limits.

Wireless Charger Usage
The FCC certification for the wireless charger is based on RF exposure testing. Maintain a distance of at least 20cm between the device surface and any person, except in specific conditions as mentioned.

FAQ

Q: Can I modify the device?
A: Any changes or modifications not approved may void your authority to operate the equipment.

Q: What is the recommended distance for Bluetooth operation?
A: Maintain a minimum distance of 20cm between the Bluetooth device and your body as per FCC guidelines.

Before the Installation

• Do not throw away packing materials until assembly is complete for small parts may come loose inside the carton during shipment, If parts are missing, please contact us.
• Assemble this item on a soft surface, such as carpet to protect the finish
• Periodically check to ensure that all connections are tight.

Care and Cleaning

1. To protect the finish, avoid the use of chemicals and household cleaners.
2.  All hot serving dishes should be placed on a pad.
3. Any liquid spilled onto the top should be cleaned up immediately with a damp cloth .Before using this product, please connect the power through the adapter
4. Bluetooth Speaker: Open your mobile phone to search for Bluetooth, and connect according to the prompts.
5. Power Switch: Click the power on the light can control the light strip.
6. Wireless Charging: Place your device with wireless charging directly on the countertop and it will charge properly.
7. USB Port: Use the charging cable to power electronic devices.
8. If you encounter problems during use, please contact us in time.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference
• This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

For Bluetooth:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

For Wireless charger:
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>