SECURITY BRANDS 10-010 Custom Polycarbonate Post Mount Enclosure Instructions
- September 12, 2024
- SECURITY BRANDS
Table of Contents
SECURITY BRANDS 10-010 Custom Polycarbonate Post Mount Enclosure
Product Information
Specifications
- Model: 10-010
- Mounting Hole Patterns: 2.50, 3.06, 4 inches
- Passthrough Hole Sizes: 1/2, 1, 1 1/2 inches
- Rough-in Dimensions (if recessing enclosure): 6-13/16 (W) x 6-1/4 (H) with a minimum depth of 3-1/2 inches
Product Usage Instructions
Mounting and Preparation
The custom enclosure comes with pilot holes for three sizes of mounting
hole patterns to attach to a pedestal using 1/4-inch bolts. It also includes
guides for various passthrough hole sizes.
Note:
If recessing the enclosure, ensure the rough-in dimensions are followed for
proper installation.
Device Mounting
The faceplate is specifically designed for mounting devices and includes
pilot holes for popular proximity card readers. There are guides for 5/8-inch
passthrough holes spaced at 1 1/2-inch intervals.
Warranty Information
This product is covered by a Two-Year Limited Warranty. For more details,
visit
securitybrandsinc.com/warranty/ or
contact customer service at TwNHoEE-LEYPDear(o9r7eLm)ia4mil74-i6t39e0d.
FAQ
-
Q: Can I mount multiple devices on the faceplate?
A: Yes, the faceplate is designed to accommodate one or more devices. -
Q: What are the rough-in dimensions for recessing the enclosure?
A: The rough-in dimensions are 6-13/16 (W) x 6-1/4 (H) with a minimum depth of 3-1/2 inches.
INSTRUCTIONS
CUSTOM ENCLOSURE
Model 10-010
IN THE BOX
Make sure you have everything shown here.
MOUNTING AND PREPARATION
The custom enclosure includes pilot holes set at three sizes of mounting hole
patterns (21/2″, 31/16″, 4 “) to attach perfectly to your particular pedestal
using 1/4-inch bolts.
It also features guides for multiple sizes of passthrough holes (1/2″, 1″,
11/2”).
NOTE: If recessing enclosure, the rough-in dimensions are 6-13/16″ (W) x 6-1/4″ (H) with a minimum depth of 3-1/2″.
DEVICE MOUNTING
The faceplate is designed for mounting one or more devices and includes pilot holes for mounting popular proximity card readers as well as three guides for 5/8-inch passthrough holes spaced at 11/2 inches apart.
Two-Year Limited Warranty
Visit securitybrandsinc.com/warranty/ for details
call 972-474-6390
or email
techsupport@securitybrandsinc.com
© 2024 Security Brands, Inc. All rights reserved.
I-10010-EN-US
Rev. B (8/2024)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>