EDIFIER EDF280041 True Wireless Earbuds User Manual

EDIFIER EDF280041 True Wireless Earbuds

Frequently Asked Questions

• Q: How do I power on/off the earbuds?
  A: Take out or place in both earbuds to power on/off.

• Q: How do I pair the earbuds for the first time?
  A: Once powered on, the earbuds will auto-enter Bluetooth pairing mode. Select EDIFIER W200T from your device list to connect.

• Q: How can I connect the earbuds to multiple devices?
  A: Pair device A with the earbuds manually and keep the earbuds in the case. Re-enter Bluetooth pairing mode and select EDIFIER W200T in device B settings to connect. Select EDIFIER W200T again in device A settings to connect.

WHAT’S IN THE BOX

APP

POWER ON/OFF

Take out or place in both earbuds to power on/off.

FIRST PAIRING

1. Once powered on, the earbuds will auto-enter Bluetooth pairing mode.
2. Select “EDIFIER W200T” from your device list to connect.

PAIRING FOR NEW DEVICE

MULTIPOINT CONNECTION

1. Pair device A with the earbuds manually and keep the earbuds in the case;
2. Re-enter Bluetooth pairing mode and select “EDIFIER W200T” in device B settings to connect.
3. Select “EDIFIER W200T” again in device A settings to connect.
   Note: For subsequent use, the earbuds will automatically reconnect to the two devices used last time.

RESET

1. Place the earbuds in the case and keep it open.
2. Press the button on the case 3 times, white LED blinks until the reset is complete, then the earbuds will auto-enter Bluetooth pairing mode

CONTROLS

Note:

1. Default sound control: High noise cancellation / Ambient sound / Noise cancellation off.
2. Download EDIFIER ConneX App for more customizable control settings.

CHARGING

Input: 5V 200mA(Earbuds) 5V 1A(Charging case)
Note: Make sure the USB port is completely dry before charging.

“3” is the minimum power required by the radio equipment to charge.
“5” is the maximum power required by the radio equipment to achieve maximum charging speed.

Statement of Compliance

UK PSTI 2023

SPECIFICATION

• Product: True Wireless Earbuds
• Model: EDF280041
• Producer: Edifier International Limited
• Address: P.O. Box 6264 General Post Office, Hong Kong
• Declaration for EU
• Frequency band: 2400MHz-2483.5MHz
• RF power output: ≤ 13dBm (EIRP)
• Hereby, Edifier International Limited declares that the radio equipment type EDF280041 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.edifier.com/global/eu-doc
• Input: 5V 200mA(Earbuds)
• 5V 1A(Charging case)

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

IC statement: CAN ICES-003(B) / NMB-003(B).
FCC ID: Z9G-EDF260
IC: 10004A-EDF260

FCC Regulatory Compliance

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

ISED Regulatory compliance
This device contains license-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

References

• Headphones, Speakers | A Passion for Sound -【Edifier USA】
• Security -【Edifier UK】
• Software Updates -【Edifier UK】

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>