EDIFIER EDF185 Enhance One Bluetooth Headphones User Manual
- June 3, 2024
- Edifier
Table of Contents
EDIFIER EDF185 Enhance One Bluetooth Headphones
Product description and accessories
Note
Hearing supplement mode is designed to improve users’ voice recognition and
supplement their hearing capabilities. Personnel with normal hearing
conditions should refrain from this mode.
- This product is not a replacement for medical hearing aids; Not recommended use for by minors.
- There are different sizes of flanges included. Please choose the right fit first and proceed to complete the hearing test in the Edifier Assist app.
- Images are for illustrative purposes only and may differ from the actual product.
Operational Guide
Charge
- When heaing the prompt indicating low battery, connect the headphone to a power source via an included charging cable.
- Red LED= charging
- Blue LED= fully charged
- Input: 5V==500mA
Note
To avoid damaging the product, please defer from using any “quick charge”
features.
Power ON/OFF
- Slide to the “ON” position to turn the headphone on. The headphone will notify battery level based on the current state.
- Slide to the “OFF” position to turn the headphone off.
Pairing
Initial use
- The headphone will auto-enter the Bluetooth pairing state. Red and blue LEDs will blink alternately.
- Select EDIFIER Enhance One” in your phone setting to connect. Blue LED will blink now and then when successfully connected.
- Follow the “Editier AsSist” app instructions to complete the hearing test and export the test results to the headphone;
- Once completed, the headphone will auto-connect to this smartphone device whenever the device’s Bluetooth is turned on.
Note
- When the smartphone device’s Bluetooth is turned on, the headphone can auto-connect to the device, given that it has been paired before;
- If the aforementioned device’s Bluetooth feature is ever turned off, you’ll need to manually select the headphone under Bluetooth devices in your smartphone device’s settings
- If you wish to connect to a new smartphone device: turn the headphone on; press and hold the button for around 5s to enter the Bluetooth pairing state, then select the headphone under Bluetooth devices in the new smartphone device’s settings.
Functional Operation
- Volume – button Press to decrease the volume
- Volume + button Press to increase the volume
- Phone call button Press to play/pause
- Press to accept/end a call
- Press and hold for 5s to enter Bluetooth pairing mode
Reset
- Turn the headphone ON, and press the button five times in quick succession; The process is completed once the indicator light blinks rapidly in blue.
Note
- The button is only used for accepting/ending phone calls; any calls via third-party apps are not supported.
- For iOS devices, if the call is accepted using the answer button on the phone, the audio will then be played via the phone speaker and not the headphone.
- Any stored hearing test data in the headphone will be cleared upon reset.
FAQs
The indicator is off during charging
- Please ensure the headphone is correctly connected to a power source.
No sound
- Check if the headphone is operating.
- Check if the headphone volume is at an appropriate level.
The hearing supplement quality of the headphone is not good
- Please ensure the hearing test has been completed and the test results have been exported to the headphone successfully through the “Edifier Assist” app.
- The product is designed for people with moderate, to moderately severe hearing loss.
- If user hearing impairments are beyond this range, the headphone may not achieve the desired results.
Important safety information
Please read the safety instructions below carefully and use the product in accordance with them, so as to achieve the optimum performance of the product and also to avoid dangers or non-compliance.
Electronic devices
- To avoid interfering with other electronic devices or causing any dangers, do not use the product in places where wireless devices are expressly disallowed.
Medical devices
- Please abide by the regulations therein and turn the product off in places for medical treatment or health care, where wireless devices are expressly disallowed.
- Radio waves generated by the product may affect the normal use of implantable medical devices or personal medical devices (e.g, pacemakers, cochlear implants, etc.). If you use these devices, please consult their manufacturers about restrictions on using the product.
- There are magnetic materials contained in the product, please consult your doctor about whether they will affect implantable medical devices.
- Do not use the product in the vicinity (closer than 15cm) of the implanted medical devices (e.g pacemakers, cochlear implants, etc.).
Road safety
- Drive safely and never engage in activities that will distract you while driving.
- There may be radio interference between electronic devices in vehicles and this product. Please contact the manufacturer for details.
- Wireless devices may interfere with the flight system of aircraft. Please abide by the relevant regulations of airlines and stop using the product in places where wireless devices are expressly disallowed.
Surroundings
- Do not use the product in places with dust, high humidity, and smudges or near magnetic fields to avoid affecting the internal circuits.
- Keep the product away from electric appliances with strong magnetic or electric fields (e.g, microwave ovens, refrigerators, etc.).
- For user safety and product protection, do not use the product during lightning storms.
- Using the product in a 0C~+45C environment is recommended. Battery performances will be hindered when the temperature is lower than +5 C.
- Do not place the product in places exposed to direct sunlight, such as on a car dashboard or beside a window.
- Do not place the product near any heat source or open fire (e.g, heaters, microwave ovens, ovens, water heaters, stoves, candles, etc.), or any other places that may generate heat.
- Do not place sharp metal objects (e.g., pins etc.) near the product’s receiver or speaker to prevent metal objects from adhering to and causing injury to you.
Accessories
- Use only accessories approved by the manufacturer and attached in the package. Otherwise, it may violate warranty terms and relevant regulations of the country where the product is located, even leading to safety accidents. Please contact the manufacturer for the approved accessories.
- The power source used must be approved by relative departments and in accordance with electrical specifications of devices as well as local regulatory requirements (e.g., UL, CSA, VDE, CCC), otherwise, there may be dangers of fire, explosion, etc.
Batteries
-
Do not dismantle or modify batteries, insert foreign objects into batteries, or immerse batteries in water or other liquids to avoid battery leakage, overheating, fire or explosion. Batteries should only be replaced by manufacturers.
-
Do not throw, squeeze or puncture batteries. High external pressure may cause batteries to
short-circuit and/or overheat. -
Do not use batteries after being immersed in water. Batteries subjected to extremely low air pressure may result in an explosion or leakage etc. lf the battery looks swollen, leaking, discolored, odor or any abnormal appearance, stop using it. Immediately dispose of batteries carefully in accordance with local laws and regulations regarding battery disposal.
Maintenance
- Lithium-ion batteries require to be charged at least once every three months.
- To reduce the risk of fire and electric shock, do not expose the product and its accessories to rain or moisture.
- Before cleaning and maintaining the product, please cease to use it and disable all applications, disconnect from other devices or unplug all connecting cables.
- Never use strong chemicals, cleaners, or detergents to clean the product or its accessories. Use only a clean and dry cloth to wipe the product or its accessories.
- Do not keep magnetic stripe cards (e.g., bank cards, telephone cards, etc.) in contact with the product for a long time, otherwise, the magnetic stripe card may be damaged by the magnetic field.
- To avoid product malfunction, fire and explosion, do not place the product and its accessories in areas with excessively high or low temperatures.
Cautions
- Please see a professional first regarding hearing impairment. Only use this product when the treatment is ineffective.
- This product is not applicable to people having acute this externa, myringitis, chronic suppurative otitis media (in the period of purulent infection), acute suppurative otitis media, and those who are allergic to the product materials.
- Please immediately cease to use the product if you feel discomfort in your ears while using it.
- Keep product away from children under the age of 14.
- Please make sure the product is inaccessible to young children and pets, to avoid them from swallowing parts of the product.
- Immediately seek professional medical assistance if the lithium battery built-in the product is accidentally swallowed.
- To reduce the risk of fire and personal injury, do not open or remove the product housing for repair.
- In case of any product damages, it must be repaired by professionals or contact the manufacturer.
- Never throw batteries into fire or places of high temperature, the battery will explode in over 100 C environments.
Environmental protection
- Do not dispose of the product and its accessories as normal household waste.
- Please abide by local regulations on the disposal of the product and its accessories.
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- IC statement: CAN ICES-003(B) / NMB-003(B).
- FCC ID: Z9G-EDF185
- IC: 10004A-EDF185
Declaration for EU
-
Frequency Band: 2400Mhz – 2483.5Mhz
-
RF Power Output: < dBm (EIRP)
There is no restriction of use. -
Input: 5V =500mA
Hereby, Edifier International Limited declares that the radio equipment type
EDF800001 is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.edifier.com/int/eu-doc.html.
Model: EDF800001
Edifier International Limited
P.O. Box 6264 General Post Office Hong Kong
www.edifier.com
2022 Edifier International Limited. All rights reserved.
Printed in China.
NOTICE:
For the need of technical improvement and system upgrade, the information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown in this manual may be slightly different from the actual product.
If any difference is found, the actual product prevails.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>