MILESEELY TR256 Handheld Infrared Thermal Imager User Guide
- June 1, 2024
- MILESEELY
Table of Contents
MILESEELY TR256 Handheld Infrared Thermal Imager
Product Overview
- Thank you for purchasing the handheld infrared thermal imager of Mileseey. Please read the user guide carefully before using it.
- TR256 is a handheld infrared thermal imager.
- TR256 has a 3.5-inch HD large screen, and can show a larger display range, more helpful in checking the fault area.
- The personalized setting of emissivity makes the detection data more accurate.
- TR256 can capture pictures and save them, it is also very convenient and fast to export pictures through a USB cable or SD card, which can be used as a basis for maintenance. TR256 is an ideal choice for maintenance and testing.
- TR256 has a built-in 5000mA lithium battery and TYPE-C charging interface, which is very convenient to use and environmental protection.
- TR256 can automatically track cold and hot spots, and automatically lock the lowest and highest temperature points, also can set high and low-temperature alarm points individually. Detect and provide more accurate temperature data in real time, and assist various temperature detection work effectively.
- Besides, TR256 is equipped with a 3W white LED light to help users see the detection area clearly in a dark environment, which is convenient for night work and ensures personnel safety.
- Its IP65 protection level can protect the device from dust and humid environments, and prolong its service life.
Safety Instructions
Appearance
-
3.5 inch HD Large Screen
-
On/Off Button
Long press to power On/Off -
LED Light Button
Short press to turn on, short press again to switch l gear /2 gears / OFF. -
Picture Memory Records
Short press to picture memory mode, and press the SET button to delete all/one picture. -
Return
Short press to return. -
Set Button
Short press to the setting menu or data setting. -
Up/Down/Left/Right button
To switch the options and view the picture records. -
LED Light
-
Infrared Camera
-
Camera Cover
-
Tripod Screw Hole
-
Shoot Button
Short press to shoot a picture and save. Note:l. Please ensure there is an SD card inside the machine before shooting photos. 2. The photos would be saved on the SD card only, the photos cannot be saved in the machine without an SD card. -
USB Port
Warning: Please DO NOT use the adapter above SV 2A to charge, otherwise it may cause machine damage. -
Mirco SD
Display icon
-
Battery status
-
Minimum temperature and position in the current screen.
-
Maximum temperature and position in the current screen.
-
Center point temperature
-
Center point
-
Current date & time
-
Maximum temperature of current area
-
Color bar
-
Minimum temperature of current area
-
Currently set detection distance
-
Currently set emissivity
-
Cursor options
Press button to switch, and press the SET button to turn on/off. -
Alarm temperature setting
Press button to switch, and press the SET button to turn on/off. -
Temperature unit options
Press button to switch °C and °F . -
Palette options
Press button to switch six colors and imaging modes.
Six colors and imaging modes -
Setting Menu
Short press the SET button on the settings menu.
Setting menu instruction
Instructions
- Press SET button to enter the settings menu, can switch the setting area and value.
- Press button to switch the menu options, press the SET button to enter the setting interface, press button to set the value.
- Press SET/ ► button to enter the setting interface, and switch the setting area.
- Press button to return to the main menu of the setting.
Emissivity
Selecting the correct emissivity is very important for the accuracy of
temperature measurement, as emissivity has a significant impact on the
measured surface temperature.
Press SET/ ► button to set the emissivity value, the value in the emissivity
setting box turns blue, press the button to adjust the emissivity value, after
the setting is completed, press the button to return to the left setting main
menu.
Tip: The emissivity can be set in the range of 0.01-0.99. For the emissivity of common objects, please refer to the table in the appendix.
Emissivity of common objects
Distance setting
- Setting the distance information before detecting can ensure more accurate temperature detection.
- Select the distance option, and press the SET/ ► button to enter the value setting interface. Press the button to set the distance value (0~3m}. After the setting is completed, press the button to the left main setting menu.
Alarm temperature setting
Select the high/low-temperature setting option, and press the SET/ ► button to enter the value setting interface. Press the SET/ ► button again to switch the setting items, and press the button to set the temperature value and “on/off”. After setting is completed, press the button to the left main setting menu.
- High-temperature setting range : 40°C~ SS0°C
- Low temperature setting range : -20°C ~ 40°C
Temperature Scale
Select the temperature option, press the SET/ ► button to enter the setting,
press the button to switch the low gain/high gain options, press the SET
button to confirm, then press and hold the button to the left main setting
menu. Temperature range of low gain: -20°C~ lS0°C
Temperature range of high gain:lS0°C~SS0°C
Note :lt takes over lOs to switch a gain. Please wait for the machine to steady after switching, then perform other operations or temperature measurements.
Display brightness
Select the display brightness option, press the SET/ ► button to enter the
setting, press the button to switch the low/middle/high options, press the SET
button to confirm, then press the button to the left main setting menu.
Date and time setting
Select the date & time option, press the SET/ ► button to enter the setting,
press the SET/ ► button again to switch the setting items, and press button to
set the value. Then press the button to the left main setting menu .
Color bar setting
Select the color bar option, press the SET/ ► button to enter the setting,
press the button to switch “on/off”, and press the SET button to confirm. Then
press the button to the left main setting menu.
USBMode
Select the USB mode option, press the SET/ ► button to enter the setting,
press the button to switch “USB disk/USB camera”, and press the SET button to
confirm. Then press the button to the left main setting menu.
-
Contact us via(service@mileseey.com) to download the PC software and complete the installation to browse images and screen projection function of real-time images Screencasting function.
-
When the USB mode is set to USB Disk,can be browsing pictures and analyzing data on PC software by connecting the USB cable to the computer.
Note
- To switch to U-Disk mode, you need to restart the thermal imager, and then plug in the USB cable to apply the U-Disk mode.
- Please do not change the Image folder name and image name, otherwise there will be a reading error.
-
When the USB mode is set to the USB camera, connect the USB data cable to the computer, and the projection function of the real-time image can be realized on the PC software.
Note :- To switch to USB camera mode, you need to turn off the thermal imager, and then plug in the USB cable, the device will automatically start to apply the USB camera mode
- Please do NOT unplug the USB cable during the computer screen projection process; Please close the projection software first, then unplug the USB cable, If you use complete.
Auto power off
Select the auto power off option, press the SET/ ► button to enter the
setting, press the button to switch the time options, press the SET button to
confirm, then press the button to the left main setting menu .
Autosave
- Select the auto-save option, press the SET/ ► button to enter the setting, press the button to switch the “on/off” options, press the SET button to confirm, then press the button to the left main setting menu.
- Selecting the “on” option means the device will save every picture automatically that users take.
- Select the “off” option, means users need to confirm whether to save after taking the pictures.
Note : It is recommended to save no more than 2000 pictures, avoid to affecting the reaction speed of the device. When the number of pictures exceeds 2000, please clean up the SD card in time.
Factory reset
- Select the factory reset option, press the SET/ ► button to enter the setting, press the button to switch the “
- Yes/No” options, press the SET button to confirm, then press the button to the left main setting menu.
Note : please use the Factory Reset function prudently, once reset is confirmed, all information in the device will be lost.
Format SD card
Select the Format SD card option, press the SET/ ► button to enter the
setting, press the button to switch the” Yes/No” options, press the SET button
to confirm, then press the button to the left main setting menu.
Not e: Please use the Format SD card function prudently, once the format
is confirmed, all the information in SD card will be lost.
Browse Image
Short press the button to enter the Image browsing interface, press ◄/►to
select different Images, press the SET button to enter the delete Image
option, press the button to select to Delete a single image or Delete all
images, and then press the SET button to confirm deletion
Note: Please do not move the SD card while browsing images, otherwise all
the images on the SD card will be lost.
LED light: To avoid the long-time LED lighting causing the temperature of the device to increase and affect the measurement accuracy, the LED light will turn off automatically after 5 minutes of continuous lighting, If you need to use it, please turn it on again.
Specifications
Copyrights
The product specifications are subject to change without notice, all final
interpretation rights were reserved by Mileseey Technology Co., Ltd. All
trademarks, product images, and technical parameters are properties of
Mileseey Technology Co., Ltd. All rights reserved.
Contact us
- Shenzhen Mileseey Technology Co., Ltd.
- Add : No.3601 Block A, TanglangTown Plaza West, Fuguang Community, Taoyuan Street, Nanshan District, Shenzhen, China
- Web: www.mileseeytools.com
- E-mail: service@mileseey.com
MILESEEY has started researching and developing manufacturers of quality
optical products including laser level, laser measure devices, Golf
rangefinders, and binoculars since 2009. Focus on development, research, and
manufacturing for over 12 years.
We strive to provide you with premium qualified products and satisfying
customer service to make your life easier and smarter.
Warranty
- 30-day return and refund guarantee, 12-month warranty, and lifetime technique support by MILESEEY.
- Please feel free to reach us with any concerns,
- Email: service@mileseey.com.
- We strive to reply to you within 24hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>