Sol-Ark 12K-2P Wiring Diagrams Instructions

September 11, 2024
Sol-Ark

12K-2P-N
WIRING DIAGRAMS

12K-2P Wiring Diagrams

DISCLAIMER
The following diagrams are general use cases. Installers are reminded that adherence to local electrical codes and regulations is mandatory. While these diagrams offer general guidance, they may not encompass all variations and specifics required by local codes. Consult with relevant authorities and ensure compliance before proceeding with any installation. The diagrams presented herein are not exhaustive and should not be relied upon solely for permitting or warranty verification. Installers are encouraged to exercise caution, seek professional advice when necessary, and undertake installations with due diligence and in accordance with established electrical standards and regulations.

Standard Wiring Diagram

  1. LOCATION OF THE NEUTRAL-GROUND BOND WILL DEPEND ON LOCAL CODE
  2. THESE SYMBOLS REPRESENT A COMMON NEUTRAL/GROND CONNECTION. DO NOT CONFUSE WITH GROUNDING ROD

WIRE GAUGE GUIDE (COPPER)

LABEL| CONDUCTOR
A| MAX. 40 AWG
B| MAX. 10 AWG
c| MAX. 4 AWG
D| 24 -23 AWG CAT6

Standard Wiring Diagram – Line Side Tap

  1. LOCATION OF THE NEUTRAL-GROUND BOND WILL DEPEND ON LOCAL CODE
  2. THESE SYMBOLS REPRESENT A COMMON NEUTRAL / GROND CONNECTION. DO NOT CONFUSE WITH GROUNDING ROD

WIRE GAUGE GUIDE (COPPER)

LABEL| CONDUCTOR
A| MAX. 4/0 AWG
B| MAX. 10 AWG
c| MAX. 4 AWG
D| 24 -23 AWG CAT6

Standard Wiring Diagram – AC Coupling in GEN

  1. LOCATION OF THE NEUTRAL-GROUND BOND WILL DEPEND ON LOCAL CODE
  2. THESE SYMBOLS REPRESENT A COMMON NEUTRAL / GROND CONNECTION. DO NOT CONFUSE WITH GROUNDING ROD

WIRE GAUGE GUIDE (COPPER)

LABEL| CONDUCTOR
A| MAX. 4/0 AWG
B| MAX. 10 AWG
c| MAX. 4 AWG
D| 24 -23 AWG CAT6

Standard Wiring Diagram – AC Coupling in LOAD

  1. LOCATION OF THE NEUTRAL-GROUND BOND WILL DEPEND  ON LOCAL CODE
  2. “GEN” BREAKER CANNOT BE USED
  3. THESE SYMBOLS REPRESENT A COMMON NEUTRAL / GROND CONNECTION. DO NOT CONFUSE WITH GROUNDING ROD

WIRE GAUGE GUIDE (COPPER)

LABEL| CONDUCTOR
A| MAX. 4/0 AWG
B| MAX. 10 AWG
c| MAX. 4 AWG
D| 24 -23 AWG CAT6

Standard Wiring Diagram – Whole-Home Generator

  1. LOCATION OF THE NEUTRAL-GROUND BOND WILL DEPEND ON LOCAL CODE
  2. THESE SYMBOLS REPRESENT A COMMON NEUTRAL / GROND CONNECTION. DO NOT CONFUSE WITH GROUNDING ROD

WIRE GAUGE GUIDE (COPPER)

LABEL| CONDUCTOR
A| MAX. 4/0 AWG
B| MAX. 10 AWG
c| MAX. 4 AWG
D| 24 -23 AWG CAT6

Standard Wiring Diagram – Off Grid

  1. LOCATION OF THE NEUTRAL-GROUND BOND WILL DEPEND ON LOCAL CODE
  2. THESE SYMBOLS REPRESENT A COMMON NEUTRAL / GROND CONNECTION. DO NOT CONFUSE WITH GROUNDING ROD

WIRE GAUGE GUIDE (COPPER)

LABEL| CONDUCTOR
A| MAX. 4/0 AWG
B| MAX. 10 AWG
c| MAX. 4 AWG
D| 24 -23 AWG CAT6

Standard Wiring Diagram – 2 Parallel Inverters | 120/240V

  1. LOCATION OF THE NEUTRAL-GROUND BOND WILL DEPEND  ON LOCAL CODE
  2. “GEN” BREAKER CANNOT BE USED
  3. THESE SYMBOLS REPRESENT A COMMON NEUTRAL / GROND CONNECTION. DO NOT CONFUSE WITH GROUNDING ROD

WIRE GAUGE GUIDE (COPPER)

LABEL| CONDUCTOR
A| MAX. 4/0 AWG
B| MAX. 10 AWG
c| MAX. 4 AWG
D| 24 -23 AWG CAT6

Standard Wiring Diagram – 3 Parallel Inverters | 120/240V

  1. LOCATION OF THE NEUTRAL-GROUND BOND WILL DEPEND  ON LOCAL CODE
  2. “GEN” BREAKER CANNOT BE USED
  3. THESE SYMBOLS REPRESENT A COMMON NEUTRAL / GROND CONNECTION. DO NOT CONFUSE WITH GROUNDING ROD

WIRE GAUGE GUIDE (COPPER)

LABEL| CONDUCTOR
A| MAX. 4/0 AWG
B| MAX. 10 AWG
c| MAX. 4 AWG
D| 24 -23 AWG CAT6

Standard Wiring Diagram – 2 Parallel Inverters | 120/208V

  1. LOCATION OF THE NEUTRAL-GROUND BOND WILL DEPEND  ON LOCAL CODE
  2. “GEN” BREAKER CANNOT BE USED
  3. THESE SYMBOLS REPRESENT A COMMON NEUTRAL / GROND CONNECTION. DO NOT CONFUSE WITH GROUNDING ROD
    WIRE GAUGE GUIDE (COPPER)

    LABEL| CONDUCTOR
    A| MAX. 4/0 AWG
    B| MAX. 10 AWG
    c| MAX. 4 AWG
    D| 24 -23 AWG CAT6

Standard Wiring Diagram – 3 Parallel Inverters | 120/208V

  1. LOCATION OF THE NEUTRAL-GROUND BOND WILL DEPEND  ON LOCAL CODE
  2. “GEN” BREAKER CANNOT BE USED
  3. THESE SYMBOLS REPRESENT A COMMON NEUTRAL / GROND CONNECTION. DO NOT CONFUSE WITH GROUNDING ROD

WIRE GAUGE GUIDE (COPPER)

LABEL| CONDUCTOR
A| MAX. 4/0 AWG
B| MAX. 10 AWG
c| MAX. 4 AWG
D| 24 -23 AWG CAT6

Copyright © 2024 Sol-Ark LLC | SK150-0065-001
Before powering up Parallel System installs, please see section 5 “Parallel Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals