VWNC3A1447 Personal Business Laptop

“`html

Product Information

Specifications:

• Model: VWNC3A1447
• USB Ports: USB 3.2 gen2 port, USB 2.0 port
• FCC Compliance: Part 15

Product Usage Instructions

1. Connecting the Device:

Locate the USB ports on the device – one USB 3.2 gen2 port and
one USB 2.0 port. Insert the appropriate cables into the respective
ports.

2. Powering On the Device:

Ensure the device is connected to a power source. Press the
power button to turn on the device.

3. FCC Compliance:

Follow FCC regulations by ensuring that the device does not
cause harmful interference and is able to accept any interference
received.

4. Troubleshooting:

If you experience any issues with radio or TV interference,
consult the dealer or a technician for assistance. Unauthorized
modifications may void the user’s authority to operate the
equipment.

FAQ (Frequently Asked Questions)

Q: What should I do if I encounter radio or TV

interference?

A: Consult the dealer or a radio/TV technician for help in
resolving interference issues.

Q: Can I connect multiple devices to the USB ports

simultaneously?

A: Yes, you can connect multiple devices to the USB ports at the
same time as long as they are compatible with the ports.

“`

VWNC3A1447 VWNC5A1440

USB 3.2 gen2 port USB 2.0 port

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
45

Este dispositivo cumple la Parte 15 de las normas de la FCC. Su funcionamiento está sujeto a las dos condiciones siguientes condiciones: (1) Este dispositivo no puede causar interferencias perjudiciales. (2) Este dispositivo debe aceptar cualquier interferencia recibida, incluyendo interferencias que puedan causar un funcionamiento no deseado.
NOTA: Este equipo ha sido probado y cumple con los límites

establecidos para los dispositivos digitales de Clase B, de acuerdo con el apartado 15 de las normas de la FCC. Estos límites están diseñados para proporcionar una protección razonable contra interferencias perjudiciales en una instalación residencial. Este equipo genera, utiliza y puede irradiar energía de radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencias perjudiciales en las comunicaciones por radio. No obstante, no se garantiza que no se produzcan interferencias en una instalación concreta. Si este equipo causa interferencias perjudiciales en la recepción de radio o televisión, lo que puede determinarse apagando y encendiendo el equipo, se recomienda al usuario que intente corregir la interferencia mediante una o más de las siguientes medidas: – Cambie la orientación o la ubicación de la antena receptora. – Aumente la separación entre el equipo y el receptor. -Conectar el equipo a una toma de corriente de un circuito distinto al que está conectado el receptor. -Consulte al distribuidor o a un técnico experto en radio/TV para obtener ayuda.
NOTA: El fabricante no se hace responsable de las interferencias de radio o TV causadas por modificaciones no autorizadas en este equipo. Tales modificati
45

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>