shockwave FBT Body Tracking And Haptic Suit User Manual

: September 12, 2024
: shockwave

Table of Contents

How to differentiate between Feet and Knee Modules
Getting started & charging **
CHARGING INSTRUCTIONS
CONNECTION INSTRUCTIONS
HANDLING INSTRUCTIONS
HEALTH AND SAFETY WARNINGS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

shockwave FBT Body Tracking And Haptic Suit User Manual

PLEASE NOTE

You will find a white coloured shape stitched on the FBT modules (except chest/hip module)

Means ‘Left’ side
Means ‘Right’ side

PLEASE NOTE

Means ‘Left’ side| You will find a white coloured shape stitched on the FBT modules (except chest/hip module)| Means ‘Right’ side
Shoulder/arm modules
Left piece| Flat side with hard Velcro – comes on the shoulder (sticks to the top of chest/hip module)| Right piece
Loop which can be open/closed with velcro – comes on the upper arm
Knee Modules
Top – with shape stitch
Bottom – without shape stitch| Top Loop which can be open/closed with velcro – comes above the knee| Right piece
Bottom Loop which can be open/closed with velcro – comes below the knee
Feet Modules
Top – with shape stitch
Bottom – without shape stitch| Top Loop which can be open/closed with velcro – comes above the ankle| Right piece
Bottom Loop which can be open/closed with velcro – comes on the foot

How to differentiate between Feet and Knee Modules

Chest/Hip module
Ideal Sensor position
Shoulder/arm module
Knee module
Foot module

Getting started & charging **

**

On the edge of the strap connecting the chest and hip panel, you will find the control
How to switch on the FBT modules
Step 1
Flip the switch given on the Chest/Hip module first
You will notice a blue light on the circuit which indicates that the modules in now switched on
Step 2
After ensuring that the Chest/Hip module is powered on, you can now switch on the other modules in the same way, according to you usage and requirements.
Note –
Please remember that only the chest/hip module can function independently. Remaining of the modules (shoulder/arms, Knee & feet) cannot function without chest/hip module and have to be paired with it.

CHARGING INSTRUCTIONS

If you switch any FBT module on, and the blue light does not turn on this means that the module is simply low on battery.
For charging the modules, simply connect the USB-C port to any 5v DC charger using a USB-C cable.
When full charged, you will notice a green light on the power circuit of the module

CONNECTION INSTRUCTIONS

After switching on the FBT modules, please follow the video instruction available at https://www.shockwavesuit.com/downloads

For any software related issues or assistance please contact – software@shockwavesuit.com

HANDLING INSTRUCTIONS

Cleaning

Use a wet wipe or a clean wet cloth to wipe the straps.
Clean the FBT straps with gentle force and avoid using extreme force as it may hamper with the electronics inside and the modules may malfunction.

Drying

After wiping the suit you can dry it under a running fan or just leave it to dry at normal room temperature

DON’Ts

Do not machine wash the FBT straps
Do not machine dry the FBT straps
Do not use bleach or any other strong chemical to clean the FBT straps
Do not soak the suit in water to wash as it is NOT waterproof

HEALTH AND SAFETY WARNINGS

Read the following instructions and warnings to reduce the risk of personal injury and discomfort including electric shock, fire and other damage to you or your surroundings.

Conditions for Use

The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instructions concerning the use of product by person responsible for their safety.
CAUTION- The product contains magnets and components that emit radio waves that may interfere with medical devices including pacemakers or other implanted devices . Please consult a licensed medical expert before using the product.
Close supervision should be exercised when the product is used by or near children
The product should not be opened, modified, disassembled in any way except by manufacturer authorized personnel.
Make sure the suit is correctly sized and do not tighten the suit beyond comfort levels
The product is intended to be worn over the body. If you notice any irritation, swelling, redness, allergy or any other skin problem please consult a doctor immediately.
If the Product is being shared make sure the suit is properly washed to avoid risk of contagious conditions. Please read the washing instructions for the same.
CAUTION- Do not bring the product in contact to hot surfaces which may result in damage/malfunction of the product and/or create a fire hazard.
Do not submerge the product inside water or any other liquid while wearing it
The use of accessories not recommended by the product manufacturer may result in product malfunction
The product is intended to be used in conjunction with other devices like Virtual Reality headsets, personal computers etc . Please make sure you follow the safety guidelines outlined in those products when using them with the Shockwave suit.

Storage

The suit should be completely dry and stored in a dry, clean and sanitized place at a temperature not exceeding the maximum rated temperature.

Power Source and Cables

Read the battery warnings and safety instructions to ensure the proper installation and use
The power source can only be an external battery pack inserted into the provided battery compartment or a class 2 compliant portable source whose output voltage should not exceed the rated voltage of the product.
The product should not be powered through any public utility power source directly or indirectly. Use of such a connection may break your local compliance guidelines.
Do not insert any foreign object other than the manufacturer provided cable connectors and silicone cap.
Unplug the suit from the power source when not in use and before/during washing
Do not operate the product with a damaged power cord
To disconnect, turn off the power from the source then remove the power jack from the product

Heating and Overuse

CAUTION- Do not let the temperature of the Modules exceed the maximum rated temperature. If at some point during operation any part of the module is overheating turn off and disconnect the power.

Battery Warnings and Safety
Batteries can EXPLODE, CATCH FIRE, and/or CAUSE BURNS if disassembled, punctured, cut, crushed, short-circuited, incinerated, recharged (disposable cells), or exposed to water, fire, or high temperatures. To ensure optimal safety and performance:

DO NOT use counterfeit or inferior-quality batteries in Shockwave suits.
The use of counterfeit and/or inferior-quality batteries could greatly reduce runtime and output performance, damage your Shockwave suit, and constitute a safety hazard.
DO NOT place loose batteries in a pocket, purse, or other receptacle containing metal objects.
DO NOT store batteries with hazardous or combustible material; store in a cool, dry, ventilated area.
While your Shockwave suit is weatherproof and safe to use outside, DO NOT allow the batteries or battery compartment to get wet prior to or during use.
ALWAYS keep batteries away from children.
REPLACE ALL batteries at the same time with batteries of the same type purchased at the same time from the same manufacturer and DO NOT load batteries backwards. MAKE SURE the battery compartment is empty and free of any loose debris before inserting batteries
Follow local guidelines to dispose of used batteries.
To the extent permissible by applicable law, failure to follow these warnings and/or directions could result in damage to your product that will not be covered by Shockwave suit’s warranty.