ELITE ACOUSTICS Gig-ISO 4 High Current Pedal Power Supply User Manual

: September 12, 2024
: ELITE ACOUSTICS

Table of Contents

ELITE ACOUSTICS Gig-ISO 4 High Current Pedal Power Supply
Product Usage Instructions
WHAT IS IN THE BOX
SYSTEM SPECIFICATIONS
WARRANTY (USA ONLY)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ELITE ACOUSTICS Gig-ISO 4 High Current Pedal Power Supply

Specifications

Product Name: Elite Acoustics Engineering Gig-ISO 4
Type: High Current Transformer Isolated Pedalboard Power Supply
Number of Outputs: 4
Output Voltage: Output 1 – Selectable +9VDC 500mA or +12VDC 500mA; Outputs 2 to 4 – +9V DC 500mA
Input Voltage: 12V ~ 24V DC
Input Current: Minimum 2000mA
Output Jacks: 5.5/2.1mm DC jack (Center Negative)
Power Supply and THRU Jacks: 5.5/2.1mm DC in jack (Center Positive)

Product Usage Instructions

What’s in the Box

Your Gig-ISO 4 package contains

(1) Gig-ISO 4 unit
(1) AC to 12VDC Power Supply Adapter
(2) BLACK (5.5/2.1mm) to BLACK (5/2.1mm) 9
(2) BLACK (5.5/2.1mm) to BLACK (5/2.1mm) 18
(1) BLACK (5.5/2.1mm) Center Negative to RED (5/2.1mm) REVERSE
Center Positive – 18

Powering the Gig-ISO 4
Connect the AC to 12VDC Power Supply Adapter to the DC input jack on the Gig- ISO 4 unit.

Connecting Pedals
Use the provided cables to connect your pedals to the outputs based on their voltage requirements.

Optional Accessories
If needed, additional accessories can be purchased separately for different connection requirements.

FAQ
Q: Can I use the Gig-ISO 4 with pedals that have different voltage requirements?
A: Yes, Output 1 of the Gig-ISO 4 is selectable between +9VDC and +12VDC, allowing you to power pedals with different voltage needs.

Q: What should I do if I need further technical support?
A: For more technical questions or support, please visit= www.eliteacoustics.com or contact us via email.

Elite Acoustics Engineering

Gig-ISO 4
High Current Transformer Isolated Pedalboard Power Supply with 4 outputs

WHAT IS IN THE BOX

Your Gig-ISO 4 package contains the following

Gig-ISO 4 unit
BLACK (5.5/2.1mm) to BLACK (5/2.1mm) 18”
BLACK (5.5/2.1mm) Center Negative to RED (5/2.1mm) REVERSE Center Positive – 18” -use this type BLACK to RED for reverse polarity from Pedal Power supply (center negative) to StompMix 4 or GigMix 4-1

NOTE: Due to continuous development and improvements of our products, features and specifications are subject to change without notice. All weights and measures are approximate.
For more technical questions, please visit: www.eliteacoustics.com

Front View

Rear View

SYSTEM SPECIFICATIONS

System: Built in a Aluminum Extrusion case, each output is isolated by it’s individual Transformer.
Output 2 – 4 : Isolated, Center Negative, 9VDC 500mA
Output 1: Isolated, Center Negative, Selectable +9VDC (500mA) or +12VDC (500mA)
THRU: None Isolated, Center Positvie – depending on DC input voltage
Input Voltage: Center Positive 12VDC 2A minimum
Displays: Power LED, Output LEDs
Switches: Output Selection for Output 1.
Outputs Jacks – 5.5/2.1mm DC jack (Center Negative)
Power supply and THRU – 5.5/2.1mm DC in jack (Center Positive)
Power Supply: DC 12V 2000mA or Higher (center Positive)

Included Accessories

AC cord, AC adaptor.
(2) BLACK (5.5/2.1mm) to BLACK (5/2.1mm) 9”
(2) BLACK (5.5/2.1mm) to BLACK (5/2.1mm) 18”
(1) BLACK (5.5/2.1mm) Center Negative to RED (5/2.1mm) REVERSE
Center Positive – 18” (for StompMix 4, GigMix 4-1)
Optional Accessories: (Sold Seperately)
BLACK (5.5/2.1mm) to BLUE (5/2.5mm) 18”
BLACK (5.5/2.1mm) Center Positive to YELLOW (5/2.5mm) REVERSE Center Negative. 18”
5.5/2.1mm – 5.5mm plug with center PIN of 2.1mm
5.5/2.5mm – 5.5mm plug with center PIN of 2.5mm
DC12V ~ 24V DCDC INPUTTHRU
Dimensions: 3 1/4”W x 3 3/4”D x 1 1/8”H
Weight: 0.8 Lbs
Product specif ications subject to change without notice.

For most updated details, please visit: www.eliteacoustics.com or contract us via email.

Legal Notice: CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.

THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

WARRANTY (USA ONLY)

Contact the Distributor in your area for service and warranty info.
Elite Acoustics Engineering Inc. warrants this product to be free of defects in material and workmanship (excluding battery) for a period of 1 year from the date of original retail purchase. Elite Acoustics Engineering Inc. warrants the Speaker’s Battery for 90 days from the date of original retail purchase. This warranty is enforceable only by the original retail purchaser. To be protected by this warranty, the purchaser must complete and return the enclosed warranty card within 14 days of purchase. During the warranty period EAE shall, as its sole and absolute option, either repair or replace, free of charge, any product that proves to be defective on inspection by EAE or its authorized service representative. To obtain warranty service, contact Elite Acoustics Engineering Technical Support via email: RMA@eliteacoustics.com PRE-AUTHORIZATION MUST BE OBTAINED

BEFORE SENDING ANY PRODUCT TO AN ELITE ACOUSTIC ENGINEERING SERVICE CENTER. All inquires must be accompanied by a description of the problem. All authorized returns must be sent to the EAE repair facility postage prepaid, insured and properly packaged. EAE reserves the right to update any unit returned for repair. EAE reserves the right to change or improve the design of the product at any time without prior notice. This warranty does not cover claims for damage due to abuse, neglect, alteration, or attempted repair by unauthorized personnel and is limited to failures arising during normal use that are due to defects in material or workmanship in the product. Any implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this limited warranty. Some states do not allow limitations on how long an implied warranty lasts, therefore above limitation may not apply to you. In no event will EAE be liable for incidental, consequential, or other damages resulting from the breach of any express or implied warranty, including among other things, damage to property, damage based on inconvenience or on loss of use of the product, and, to the extent permitted by law, damages for personal injury. Some states do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty only applies to products sold and used in the United States of America. For warranty information in all other countries please refer to your local distributor. ©Elite Acoustics Engineering Inc.