Elite Acoustics Engineering StompMIX X4-2 4 Channels Digital Mixer Pedal with Rechargeable Battery User Guide
- June 1, 2024
- Elite Acoustics Engineering
Table of Contents
Elite Acoustics Engineering
Stomp MIX X4-2
4 Channels Digital Mixer Pedal
with Rechargeable Battery
Quick Guide Handbook – V1.02
WHAT IS IN THE BOX
Your StompMix X4-2 package contains the following:
(1) StompMix X4-2 unit
(1) AC to 12VDC Power Supply Adapter
NOTE: Due to continuous development and improvements of our products,
features and specifi cations are subject to change without notice. All weights
and measures are approximate.
For more technical questions, please visit:
www.eliteacoustics.com
LCD FUNCTIONS
Menu Buttons with LCD:
Press any of the 3 menu buttons(black button located to the left theLCD) or 4
encoders(blue knobs located around LCD) to access and adjust features and
settings. Most menus have several pages of options, which are adjusted by
turning the corresponding encoder.
HOLD down the
Corresponding encoder to MUTE or UNMUTE each channel.
PRESS the “page”
button to access these FUNCTIONS
“Main Mix”
Adjust the level of each of the 4 channels sent to the Main MIX Outputs.
“Aux Mix”
Adjust the level of each of the 4 channels sent to the Aux Mix Outputs.
“Delay Mix”
Select the Chan which delay is inserted and Delay Mix Level.
“Reverb Send”
Adjust the Reverb Send level of each of the 4 channels.
PRESS the
corresponding Encoder knob for these Functions.
use the corresponding Encoder knob for these Functions.
“Channel EQ” Adjust for each channel Low Mid Mid Freq High
“Channel Util” – more details on next page.
Polarity (=) or (-)
Notch Filter
Filter – Off/Highpass/Notch
Filter Freq.
“Channel Dyn”
Adjust levels for Gate
Compressor
use the corresponding Encoder knob for these Functions.
“Channel Util”
Input Phase Polarity is (-) Reversed.
Notch – 76 Hz.
Filter – Notch 56 Hz.
“Channel Util”
Input Phase Polarity is (=) – NOT reversed.
Notch – OFF
Filter – OFF
Filter Freq. – 84 Hz.
“Channel Util”
Input Phase Polarity is (-) Reversed.
Notch – OFF
Filter – HiPass
Filter Freq. – 84 Hz.
Editing “Main Mix” parameters
PRESS the “parameter” button to access these FUNCTIONS
Preset “Parameter” key
Adjust the Main Mix stereo panning for each of the 4 channels.
Preset “Parameter” key
Adjust the Main Mix output Level.
PRESS the
“parameter” button to access these FUNCTIONS
Preset “Parameter” key
Adjust the AUX stereo panning for each of the 4 channels.
Preset “Parameter” key
Adjust Aux Send connection – “Pre” or “Post”
Pre – Pre “Main Mix level”
Post – Post “Main Mix level” ““Adjust the Aux Mix output Level.
Editing “Delay Mix” parameters
PRESS the
“parameter” button to access these FUNCTIONS
Preset
“Parameter” key
Adjust the 4 Delay Parameter by the corresponding encoder knobs.
Editing “Reverb Send” parameters
PRESS the
“parameter” button to access these FUNCTIONS
Preset
“Parameter” key
Adjust the 4 Reverb Parameter by the corresponding encoder knobs.
“PreDelay” “Decay” “Tone” and “Shimmer”
PRESS the “system” button to access these FUNCTIONS
Input Meters
It is critical to adjust the normal input levels to be below -12db level to
avoid Clipping the inputs of the StompMix 4. Distortion can occur when inputs
are clipping. CHAN 1 and CHAN 2 have input level knobs and PAD switches, CHAN
3 and CHAN 4 require input level control from the extenal device.
“Memories”
There are 10 scenes that can be saved.
Use the Corresponding encoder to make changes.
“Push” – push the encoder
“Hold” – push/hold the Encoder.
(*) next to the “Mem” number means scenes is stored in that location.
“Assigns”
“A” and “B” footswitch have assignable functions. See next page for more
details.
Main Mix and Aux Mix outputs can be assigned to the 1/4” L/R jacks or the 1/8”
jack.
“Memories”
Mem – indicated the Memory slot #
Clear – to Clean Memory slot indicated
Store – to Store Memory slot indicated.
“Press” and“Hold” – push/hold the Encoder.
Recall – to recall the memory indicated.
“Push” – quick press ONLY. DO NOT hold.
When the foot switches are assigned to “M- M+” if pressing a foot switch
results in a memory being loaded (at least two memories are not empty), a page
pops up showing the number of the recalled memory in large font.
USE the corresponding Encoder knob for these Functions.
Assign “A” and “B” foot switches
“Assigns”
“A” – Memory DOWN
“B” – Memory UP
“Assigns”
“A” — CHAN 1 ON/OFF
“B” — CHAN 2 ON/OFF
“Assigns”
“A” – CHAN 1/2 ON/OFF
“B” – CHAN 3/4 ON/OFF
“Assigns”
“A” – all CHAN ON/OFF
“B” – EFX ON/OFF
“Assigns”
“A” — Reverb ON/OFF
“B” — Delay TAP “B” LED will fl ash, – Delay can be turn on/ off by HOLD down
the “B”
USE the corresponding Encoder knob for these Functions.
Assign “OUT1” and “OUT2” output routing
“Assigns”
“AUX” Mix output to OUT1
“MAIN” Mix output to OUT2
“Assigns”
“MAIN” Mix MON and “AUX Mix
MONO output to OUT1 (L/R)
“AUX” Mix output OUT2
“Assigns”
OUT1 and OUT 2 routing are selectable from 3 seperate output mix.
| Main MIX
Aux Mix
Main Mix MONO – LEFT
Aux Mix MONO – Right
---|---
| CHAN 1 LEVEL and PAD
---|---
| MIC/LINE or INSTRUMENT INPUT select
| INSTRUMENT INPUT (HIGH Z – 1M ohm) 1/4” TS
| MIC/LINE combo jack. XLR/1/4” TRS
| CHAN 2 LEVEL and PAD
| MIC/LINE or INSTRUMENT INPUT select
| INSTRUMENT INPUT (HIGH Z – 1M ohm) 1/4” TS
| MIC/LINE combo jack. XLR/1/4” TRS
OUTPUT 1 LEVEL
CHAN 1- 4 INPUTLEVEL TRIM
Chan 3/4 INPUT 1/4” TS
OUTPUT 2 L/R 1/4” TRS
OUTPUT 1 L/R XLR
GND LIFT FOR XLR OUT PUT
Power Switch
DC INPUT (12VDC, 3000mA)
SYSTEM SPECIFICATIONS
-
System Architecture : Ultra high-speed high-capacity DSP with lossless A/D and D/A conversion. Integrated Digital Mixer supports routing and seamless signal-level management for four fully configurable audio channels. Color Graphic LCD presents a highly intuitive GUI for settings and save & recall.
-
Digital Effects and Controls: Channel Parametric EQ, Notch Filter, Selectable HiPass/Notch Filter, Compressor, Noise Gate, Main and Aux panning, Reverb,Delay, Real-Time Chan-Level Bar Graphs, Save & Recall Programs.
. Footswitch Controls “A” and “B” – Assigable functions include Memory Up/Down, Mutes,
Reverb bypass and Tap Delay.
• CHAN 1/2 INSTR: 1M ohm -
MIC/LINE Combo Jack Inputs: XLR balanced 1K ohm, 1/4” TRS 10K ohm
. CHAN 3/4 TS Inputs: 1M ohm 1/4” input jacks -
Phantom Power: +48V
-
Frequency Response: 20hz – 19Khz +/- 1db
-
Displays: Color Graphic LCD; phantom power
-
Connectors: CH1 & 2: Input jacks (Combo Jack – mic XLR 1/4” Line, 1/4” INSTR), CH3/4: (1/4” Line),
Output 2 – 1/4” TRS jack
Output 1 – XLR L/R outputs,
Power supply – DC in jack -
Power Supply: DC 12V 3000mA or Higher
-
Built-in Rechargeable Battery: Playtime – up to 4 hours on smaller battery Depending on Model, up to 8 hours on large LFP battery Depending on model.
-
Accessories: AC cord, AC adaptor.
-
Dimensions: 4.3/4”W x 5 1/2”D x 4”H
-
Weight: 2.8 lbs Product specifications subject to change without notice.
For most updated details, please visit: www.eliteacoustics.com or contract us via email.
Legal Notice: CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS.
- THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
- THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
WARRANTY (USA ONLY)
Contact the Distributor in your area for service and warranty info.
Elite Acoustics Engineering Inc. warrants this product to be free of defects
in material and workmanship (excluding battery) for a period of 1 year from
the date of original retail purchase. Elite Acoustics Engineering Inc.
warrants the Speaker’s Battery for 90 days from the date of original retail
purchase. This warranty is enforceable only by the original retail purchaser.
To be protected by this warranty, the purchaser must complete and return the
enclosed warranty card within 14 days of purchase. During the warranty period
EAE shall, as its sole and absolute option, either repair or replace, free of
charge, any product that proves to be defective on inspection by EAE or its
authorized service representative. To obtain warranty service, contact Elite
Acoustics Engineering Technical Support via email:
RMA@eliteacoustics.com.
PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO AN ELITE
ACOUSTIC ENGINEERING SERVICE CENTER. All inquires must be accompanied by a
description of the problem. All authorized returns must be sent to the EAE
repair facility postage prepaid, insured and properly packaged. EAE reserves
the right to update any unit returned for repair. EAE reserves the right to
change or improve the design of the product at any time without prior notice.
This warranty does not cover claims for damage due to abuse, neglect,
alteration, or attempted repair by unauthorized personnel and is limited to
failures arising during normal use that are due to defects in material or
workmanship in the product. Any implied warranties, including implied
warranties of merchantability and fitness for a particular purpose, are
limited in duration to the length of this limited warranty. Some states do not
allow limitations on how long an implied warranty lasts, therefore above
limitation may not apply to you. In no event will EAE be liable for
incidental, consequential, or other damages resulting from the breach of any
express or implied warranty, including among other things, damage to property,
damage based on inconvenience or on loss of use of the product, and, to the
extent permitted by law, damages for personal injury. Some states do not allow
the exclusion of limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights, which vary from
state to state. This warranty only applies to products sold and used in the
United States of America. For warranty information in all other countries
please refer to your local distributor.
©Elite Acoustics Engineering Inc.
Documents / Resources
|
Elite Acoustics Engineering StompMIX X4-2 4 Channels Digital Mixer Pedal with
Rechargeable
Battery
[pdf] User Guide
StompMIX X4-2 4 Channels Digital Mixer Pedal with Rechargeable Battery,
StompMIX X4-2, 4 Channels Digital Mixer Pedal with Rechargeable Battery,
Digital Mixer Pedal with Rechargeable Battery, Pedal with Rechargeable
Battery, Rechargeable Battery
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>