HELM MK-M 140 H 111 Sliding Door System Installation Guide

HELM MK-M 140 H 111 Sliding Door System

Specifications

• Certified according to DIN EN 1527:2013 (200,000 cycles)
• Maximum leaf weight: 140 kg
• Leaf thickness: from 30 mm
• All dimensions in millimeters

Product Usage Instructions

Intended Use

• The sliding door fittings are suitable for dry indoor spaces.
• Open and close hand-operated sliding elements using only the intended door handles and flush pulls.
• Do not slam or shove hand-operated sliding elements; guide them slowly into the desired position. Any other use is considered improper.

Safety Instructions

• Installation and commissioning should only be done by qualified personnel.
• Wear suitable protective clothing during installation.
• It is recommended to have two people for the installation.
• Be cautious of moving parts in the sliding area of the door leaf to prevent injury.

Maintenance

• The hardware parts are almost maintenance-free and easy to clean. Regularly check the sliding door fittings for signs of wear or damage.
• Do not operate damaged systems. Check all fastening elements and perform a functional test regularly.
• Repair work should be done by qualified personnel or specialist companies using original spare parts.

Disposal

• Disassemble the system in reverse order of installation by qualified personnel.
• Dispose of the product following environmental regulations.

FAQ

Q: Can the sliding door system be used outdoors?

A: No, the sliding door fittings are only suitable for dry indoor spaces.

Q: How often should I check the sliding door fittings for maintenance?

A: The fittings should be checked regularly for signs of wear or damage, and a functional test should be carried out periodically.

About these instructions

• These instructions describe the installation of the sliding door system HELM MK-M 140 timber-wall installation with wall brackets.
• The installation is shown using the example of a right-opening door. For left-opening doors, the installation must be carried out in a mirror image.
• certified according to DIN EN 1527:2013 (200.000 cycles)
• max. leaf weight: 140 kg
• leaf thickness: from 30 mm
• all dimensions in millimeters
• For safe and proper use, follow these instructions.
• Keep them for future reference.
• Important advice to prevent injury to persons and damage to property
• Clean the tread of the track

Intended use

• The sliding door fittings are only suitable for dry indoor spaces.
• Open and close hand-operated sliding elements using only the intended door handles and flush pulls.
• Do not slam and shove hand-operated sliding elements; slowly guide them into the desired position.
• Any other use is considered improper and will invalidate all liability and warranty.

Safety instructions

• Installation and commissioning may only be carried out by qualified personnel.
• Suitable protective clothing must be worn during installation.
• We recommend the installation to be carried out by two people.
• There is a risk of injury due to moving parts in the sliding area of the door leaf.

Requirements for the wall, ceiling, and floor and the fixing material

• The load-bearing capacity of the wall or ceiling must meet static and dynamic requirements.
• The substructure must be permanently capable of bearing loads, flat and plumb (max. tolerance 2 mm per meter).
• The fixing material must be suitable for the substructure and meet the static and dynamic requirements. Refer to the technical instructions for the fixing material.
• The fixing material is not included in the scope of delivery.

Maintenance

• The hardware parts are almost maintenance-free and easy to clean.
• The sliding door fittings must be checked regularly for signs of wear or damage.
• Damaged systems may not be operated any longer.
• Furthermore, all fastening elements such as screws, nuts, etc. must be checked and a functional test must be carried out.
• Repair work must be carried out by qualified personnel or specialist companies. Only original spare parts are to be used.

Cleaning

• Do not clean anodized aluminum with acids or other alkaline cleaners. Furthermore, scouring powder and steel wool should not be used for cleaning. Dust, stains, and light soiling can be removed with lukewarm water.
• Persistent soiling such as gypsum or cement remnants can be easily removed if you add a few squirts of a conventional wetting agent (like dishwashing liquid) to the water.
• A small squirt of a wetting agent is sufficient to obtain good results during cleaning.
• We explicitly point out that the anodized coating can be damaged by mortar and lime water. That means it is important that the bucket with water does not contain any substances other than a wetting agent.

Disposal

• Disassembly of the system is carried out in the reverse order of installation and must be performed by qualified personnel. The product must be disposed of in an environmentally friendly manner.
• Refer to the national statutory regulations.

Dimension

Drawing / Calculations

• Leaf height
  • FH = MH – 77 – 6
• Legend
  • FH leaf height
  • MH installation height

Calculations

Scope of delivery

Required tools

Installation steps

• The technical specifications are up to date. We reserve the right to make modifications to design and styling that serve the purpose of technical improvement.
• We appreciate your understanding that we assume no liability for any typing errors or any other errors. The reproduction of this document, in extracts or complete, is not permitted without our express written permission.
• This installation instructions supersedes all previous installation instructions.
• Woelm GmbH
• Hasselbecker Str. 2 – 4
• D-42579 Heiligenhaus
• Tel. +49 (0) 2056 18-0
• Fax +49 (0) 2056 18-21
• www.woelm.de
• contact@woelm.de
• Woelm Austria GmbH
• Seewalchen 5 A
• A-5201 Seekirchen
• Tel. +43 (0) 6212 2502
• Fax +43 (0) 6212 6995
• www.woelm.at
• contact@woelm.at

Documents / Resources

| HELM MK-M 140 H 111 Sliding Door System [pdf] Installation Guide
DSMKM140H111001, 202407, MK-M 140 H 111 Sliding Door System, MK-M 140 H 111, Sliding Door System, Door System
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>